Characterization of electrowetting, contact angle hysteresis, and adhesion on digital microfluidic devices with inkjet-printed electrodes

The ability to remove unbound biological material from a reaction site has applications in many biological protocols, such as those used to detect pathogens and biomarkers. One specific application where washing is critical is the Enzyme-Linked ImmunoSorbent Assay (ELISA). This protocol requires multiple washing steps to remove multiple reagents from a reaction site. Previous work has suggested that a passive mechanical comb filter can be used to wash particles in digital microfluidic devices. A method for the characterization of passive mechanical filtration of particles in Digital MicroFluidic (DMF) devices is presented in this work. In recent years there has been increased development of Lab-On-A-Chip (LOAC) devices for the automation and miniaturization of biological protocols. One platform for further research is in digital microfluidics. A digital microfluidic device can control the movement of pico-to nanoliter droplets of fluid using electrical signals without the use of pumps, valves, and channels. As such, fluidic pathways are not hardwired and the path of each droplet can be easily reconfigured. This is advantageous in biological protocols requiring the use of multiple reagents. Fabrication of these devices is relatively straight forward, since fluid manipulation is possible without the use of complex components. This work presents a method to characterize the performance of a digital microfluidic device using passive mechanical supernatant dilution via image analysis using a low cost vision system. The primary metric for performance of the device is particle retention after multiple passes through the filter. Repeatability of the process will be examined by characterizing performance of multiple devices using the same filter geometry. Qualitative data on repeatability and effectiveness of the dilution technique will also be attained by observing the ease with which the droplet disengages from the filter and by measuring the quantity of fluid trapped on the filter after each filtration step.

Download Full-text

Contact Angle Hysteresis Characterization of Textured Super-Hydrophobic Surfaces

TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference ◽

10.1109/sensor.2007.4300201 ◽

2007 ◽

Cited By ~ 2

Author(s):

Ashutosh Shastry ◽

Shaghayegh Abbasi ◽

Aziel Epilepsia ◽

Karl F. Bohringer

Keyword(s):

Contact Angle ◽

Contact Angle Hysteresis ◽

Hydrophobic Surfaces

Download Full-text

A Robust Superhydrophobic Surface for Digital Microfluidics

ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, Volume 1 ◽

10.1115/icnmm2011-58159 ◽

2011 ◽

Author(s):

David Barona ◽

A. Amirfazli

Keyword(s):

Superhydrophobic Surface ◽

Mechanical Stability ◽

Contact Angle Hysteresis ◽

Digital Microfluidics ◽

Microfluidic Devices ◽

Contact Angles ◽

Lab On Chip ◽

Adverse Conditions ◽

On Chip ◽

Digital Microfluidic

Digital microfluidics depends on efficient movement of individual drops for a variety of tasks, e.g. reagent delivery, mixing, sampling, etc. Superhydrophobic (SH) coatings generally show high repellency and low adhesion for a variety of liquids. Therefore, SH coatings can provide for an efficient drop delivery and hence low energy requirements for a fluidic chip. However, wide application of such coatings is hampered by fragile nature of such coatings to date. A new SH coating is developed that addresses the fragility challenge of such coatings. It is based on application of nanoparticles to fluoropolymers. The mechanical stability, wear resistance and durability under prolonged liquid exposure of this new coating is discussed. It is shown that the new SH coating can maintain high contact angles, low contact angle hysteresis needed for drop mobility under adverse conditions/application of digital microfluidic devices. The developed SH coating can also be sprayed onto various surfaces, including glass used in traditional lab-on-chip (LOC) devices, or even paper for enabling novel Lap-on-paper (LOP) devices.

Download Full-text