Investigation of the thermal performance of coconut fibre composite with aluminium reflector cooling roofs

2018 ◽  
Vol 22 (3) ◽  
pp. 2207-2221
Author(s):  
V. Vinod Kumar
2020 ◽  
Vol 197 ◽  
pp. 02015
Author(s):  
Kristian Fabbri ◽  
Fabrizio Barbieri ◽  
Francesca Merli

This study focuses on the application of coconut fibre insulators, an insulating material rarely utilized in the Mediterranean context. Despite its undoubted thermal performance, some queries are related with of his thermo-hygrometric behavior. More precisely, during the use of coconut for covering building for realizing green roofs, which represent a technological solution often adopted in the case of sustainable buildings or nearly zero energy building. Green roofs represent a valid constructive solution with high thermal performances, adopted in existing and new buildings. This paper investigates the thermo-hygrometric behavior of the concrete and Cross Laminated Timbre slabs, insulated with coconut fibreboards (CF) such as an alternative synthetic insulator, referred to a series of different green roofs scenarios. The results show that coconut fibre insulations are equally comparable to natural and synthetic materials. Therefore, coconut fibre could represent a good chance for realization of green roof having high thermal performance and hygrothermal behavior in the same time. This material could be an alternative solution to the normal synthetic materials actually used, in a perspective of sustainable architecture.


2020 ◽  
Vol 92 (3) ◽  
pp. 30901
Author(s):  
Suvanjan Bhattacharyya ◽  
Debraj Sarkar ◽  
Ulavathi Shettar Mahabaleshwar ◽  
Manoj K. Soni ◽  
M. Mohanraj

The current study experimentally investigates the heat transfer augmentation on the novel axial corrugated heat exchanger tube in which the spring tape is introduced. Air (Pr = 0.707) is used as a working fluid. In order to augment the thermohydraulic performance, a corrugated tube with inserts is offered. The experimental study is further extended by varying the important parameters like spring ratio (y = 1.5, 2.0, 2.5) and Reynolds number (Re = 10 000–52 000). The angular pitch between the two neighboring corrugations and the angle of the corrugation is kept constant through the experiments at β = 1200 and α = 600 respectively, while two different corrugations heights (h) are analyzed. While increasing the corrugation height and decreasing the spring ratio, the impact of the swirling effect improves the thermal performance of the system. The maximum thermal performance is obtained when the corrugation height is h = 0.2 and spring ratio y = 1.5. Eventually, correlations for predicting friction factor (f) and Nusselt number (Nu) are developed.


2019 ◽  
Vol 50 (8) ◽  
pp. 757-772 ◽  
Author(s):  
Yicang Huang ◽  
Hui Li ◽  
Shengnan Shen ◽  
Yongbo Xue ◽  
Mingliang Xu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document