Terahertz band pass filter design using multilayer metamaterials

2020 ◽  
Vol 52 (3) ◽  
Author(s):  
A. Beheshti Asl ◽  
A. Rostami ◽  
I. S. Amiri
2019 ◽  
Vol 25 (3) ◽  
pp. 1-7 ◽  
Author(s):  
Fangrong Hu ◽  
He Wang ◽  
Xiaowen Zhang ◽  
Xinlong Xu ◽  
Wenying Jiang ◽  
...  

2015 ◽  
Vol 77 (12) ◽  
Author(s):  
Kabir Ibrahim Jahun ◽  
Hussein Mohamed Hagi Hassan Abdirahman Mohamud Shire ◽  
Ali Orozi Sougui ◽  
S. H. Dahlan

Compact microstrip band-pass filter design using parallel coupled lines is presented in this paper. The microstrip lines are calculated and constructed using CST studio with two input and output ports of the filter structure are printed over Defected Ground Structure (DGS).The proposed symmetrical structure offers a simple and compact design while exhibiting an improved stop-band characteristics in comparison to conventional coupled microstrip line filter structure. The simulation and measurements of 2GHz prototype band pass filter are presented. The measured result agrees well with the simulation data. Compared with conventional parallel coupled line band pass filter, the second, third and fourth spurious responses are suppressed; in addition, the size of the prototype filter circuit is reduced up to 20.8%.  


2008 ◽  
Author(s):  
Hui Li ◽  
Xinyu Zhang ◽  
Tianxu Zhang ◽  
Xubang Shen

2010 ◽  
Vol 2010 ◽  
pp. 1-8 ◽  
Author(s):  
Santosh Vema Krishnamurthy ◽  
Kamal El-Sankary ◽  
Ezz El-Masry

A CMOS active inductor with thermal noise cancelling is proposed. The noise of the transistor in the feed-forward stage of the proposed architecture is cancelled by using a feedback stage with a degeneration resistor to reduce the noise contribution to the input. Simulation results using 90 nm CMOS process show that noise reduction by 80% has been achieved. The maximum resonant frequency and the quality factor obtained are 3.8 GHz and 405, respectively. An RF band-pass filter has been designed based on the proposed noise cancelling active inductor. Tuned at 3.46 GHz, the filter features total power consumption of 1.4 mW, low noise figure of 5 dB, and IIP3 of −10.29 dBm.


Author(s):  
El Beqal Asmae ◽  
Kritele Loubna ◽  
Benhala Bachir ◽  
Zorkani Izeddine

In this paper, two Meta-heuristic techniques; namely Ant Colony Optimization (ACO) and Genetic Algorithm (GA) have been applied for the optimal design of digital and analog filters. Those techniques have been used to solve multimodal optimization problem in Infinite Impulse Response (IIR) filter design and to select the optimal component values from industrial series as well as to minimize the total design error of a 2nd order Sallen-Key active band-pass filter, also a comparison between the performances reached by those two Meta-heuristics was made in this article.


Sign in / Sign up

Export Citation Format

Share Document