Effect of High-Temperature Deformation in the Supercooled Liquid Region on the Service Performance of a Zr-Based Bulk Metallic Glass

2021 ◽  
Vol 30 (4) ◽  
pp. 2940-2945
Author(s):  
H. E. Hu ◽  
Z. Lu ◽  
X. H. Su ◽  
J. X. Deng
Keyword(s):  
High Temperature ◽  
Metallic Glass ◽  
Bulk Metallic Glass ◽  
Supercooled Liquid ◽  
Supercooled Liquid Region ◽  
Service Performance ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Liquid Region

High Temperature Deformation in the Amorphous or Partially Crystallized Zr41.2Ti13.8Cu12.5Ni10Be22.5 Bulk Metallic Glass

2002 ◽  
Vol 754 ◽  
Author(s):  
Q. Wang ◽  
J.J. Blandin ◽  
M. Suery ◽  
J.M. Pelletier
Keyword(s):  
High Temperature ◽  
Metallic Glass ◽  
Strain Rate ◽  
Bulk Metallic Glass ◽  
Supercooled Liquid ◽  
Supercooled Liquid Region ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Liquid Region ◽  
Newtonian Behavior

ABSTRACTThe high temperature deformation of the Zr41.2Ti12.5Cu13.8Ni10Be22.5 bulk metallic glass (BMG) is studied in the supercooled liquid region. Both fully amorphous and partially crystallized states are investigated. In the studied experimental domain, the amorphous alloy exhibits a Newtonian behavior at high temperature and/or low strain rate whereas a transition to non-Newtonian behavior is observed when the temperature is decreased and/or the strain rate is increased. In the Newtonian domain, the dependency of the viscosity upon temperature can be described by an Arrhénius law. As far as the as-received alloy is maintained at high temperature for which phase separation and primary crystallisation is expected, the flow stress continuously increases, which is at least partly attributed to a change in the residual amorphous phase.

High Temperature Deformation Characteristics of Zr76.11Ti4.20Cu4.51Ni3.16Be1.49Nb10.53 Bulk Metallic Glass Composite

2007 ◽  
Vol 539-543 ◽  
pp. 2111-2116 ◽  
Author(s):  
H.J. Jun ◽  
Kwang Seok Lee ◽  
Yeon Chul Yoo ◽  
Young Won Chang
Keyword(s):  
Metallic Glass ◽  
Bulk Metallic Glass ◽  
Supercooled Liquid ◽  
Supercooled Liquid Region ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Glassy Matrix ◽  
Liquid Region ◽  
Compression Tests ◽  
Bcc Structure

The thermal properties of a Zr76.11Ti4.20Cu4.51Ni3.16Be1.49Nb10.53 bulk metallic glass (BMG) have been investigated by using a differential scanning calorimeter (DSC). The composition of dendrite phase was then subsequently analyzed by using an EPMA, XRD, and TEM. The glass transition and crystallization onset temperatures were determined as 339.7 °C and 375.8 °C for this BMG, respectively. The Zr-Ti-Nb dendrite phase was found to have a BCC structure. Mechanical properties have also been examined by conducting a series of uniaxial compression tests at various temperatures within supercooled liquid region under the strain rates between 10-4 /s and 3×10-2 /s. The hardness of matrix and dendrite was then measured separately. The glassy matrix appears to play major role on the elongation, while dendrite phase on the strength of this BMG composite at high temperatures within supercooled liquid region.

scholarly journals Effects of Annealing on Enthalpy Recovery and Nanomechanical Behaviors of a La-Based Bulk Metallic Glass

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 579
Author(s):  
Ting Shi ◽  
Lanping Huang ◽  
Song Li
Keyword(s):  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Metallic Glass ◽  
Bulk Metallic Glass ◽  
Structural Relaxation ◽  
Supercooled Liquid ◽  
Supercooled Liquid Region ◽  
Liquid Region ◽  
Nanoindentation Measurement

Structural relaxation and nanomechanical behaviors of La65Al14Ni5Co5Cu9.2Ag1.8 bulk metallic glass (BMG) with a low glass transition temperature during annealing have been investigated by calorimetry and nanoindentation measurement. The enthalpy release of this metallic glass is deduced by annealing near glass transition. When annealed below glass transition temperature for 5 min, the recovered enthalpy increases with annealing temperature and reaches the maximum value at 403 K. After annealed in supercooled liquid region, the recovered enthalpy obviously decreases. For a given annealing at 393 K, the relaxation behaviors of La-based BMG can be well described by the Kohlrausch-Williams-Watts (KWW) function. The hardness, Young’s modulus, and serrated flow are sensitive to structural relaxation of this metallic glass, which can be well explained by the theory of solid-like region and liquid-like region. The decrease of ductility and the enhancement of homogeneity can be ascribed to the transformation from liquid-like region into solid-like region and the reduction of the shear transition zone (STZ).

Sign in / Sign up

Export Citation Format

Share Document