The aim of this study was to explore the applicability of manganese coated sand (MCS) in the presence and absence of sodium hypochlorite for the removal of Mn(II) (2 mg/L) from aqueous solutions. Sand itself is widely used as a filter media for the treatment of wastewaters and it was reported that during the treatment, Mn(II), which is present in the wastewater, is to be deposited on the surface of sand in the form of manganese dioxide. The present investigation dealt with various MCS samples, prepared in the laboratory by various doses of Mn(II) (i.e. from 0.05 to 0.2 mol/L) and the samples were obtained from the pilot plant and naturally coated in the water treatment plant for the removal of Mn(II) in the batch and column studies. Moreover, it was realised that the role of hypochlorite is multifunctional as it not only enhances the uptake of Mn(II) on the surface of MCS through oxidation of Mn(II) into Mn(IV) and hence the formation of manganese dioxide, but it was also supposed to disinfect the bacteria or harmful pathogens from the waste/surface waters. The results obtained clearly inferred that various MCS samples used for the removal of Mn(II) from aqueous solutions showed comparable removal efficiency. However, the presence of sodium hypochlorite greatly enhanced the removal of Mn(II) as more than 80% Mn(II) was removed in the presence of sodium hypochlorite at around pH 6.5. Similarly, while comparing the column data it was again noted that the breakthrough points occurred after the 4,100 and 6,500 bed volumes, respectively, in the absence and in the presence of sodium hypochlorite (2 mg/L).
Experimental Investigations and Theoretical Modeling Aspects in Column Studies for Removal of Cr(VI) from Aqueous Solutions Using Activated Tamarind Seeds
