An extensive look into the effect of mercerization treatment on dimensional properties of cotton plain knitted fabric

2013 ◽  
Vol 14 (2) ◽  
pp. 330-337 ◽  
Author(s):  
A. R. Moghassem ◽  
P. Valipour
Keyword(s):  
Knitted Fabric ◽  
Dimensional Properties ◽  
Plain Knitted Fabric ◽  
Mercerization Treatment

Geometry and Dimensional Properties of Plain Loops Made of Rotor Spun Cotton Yarns

1988 ◽  
Vol 58 (4) ◽  
pp. 214-221 ◽  
Author(s):  
P. K. Banerjee ◽  
T. S. Alaiban
Keyword(s):  
Experimental Data ◽  
Linear Density ◽  
Knitted Fabric ◽  
Loop Length ◽  
Dimensional Properties ◽  
Plain Knitted Fabric ◽  
Cotton Yarns

An analysis of experimental data on plain knitted fabric dimensions reveals that the area ( Ks) and linear ( Kc, Kw) parameters are not tenable propositions, at least for rotor spun cotton yarns. Fabric dimensions are shown to depend not only on loop length but also strongly on tightness factor and relatively weakly on machine gauge and yarn linear density.

scholarly journals Mechanical Properties of Welt Knitted Fabric Reinforced Composites

1995 ◽  
Vol 4 (3) ◽  
pp. 096369359500400 ◽  
Author(s):  
Hiroyuki Hamada ◽  
Asami Nakai ◽  
Akihiro Fujita ◽  
Miyako Inoda
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Tensile Properties ◽  
Fracture Mode ◽  
Knitted Fabric ◽  
Reinforced Composites ◽  
Reinforced Composite ◽  
Plain Knitted Fabric ◽  
Knitted Structure

In this paper, welt knitted fabric reinforced composites were fabricated and its tensile properties were measured. Changing knitted structure from plain knit to welt knit caused changing mechanical properties, particularly isotropic tensile strength could be obtained. The fracture mode of welt knitted fabric reinforced composite was similar that of plain knitted fabric reinforced composite.

Analysis of physical properties and structure design of weft-knitted spacer fabric with high porosity

2016 ◽  
Vol 88 (1) ◽  
pp. 59-68 ◽  
Author(s):  
Chaoyu Chen ◽  
Zhaoqun Du ◽  
Weidong Yu ◽  
Tilak Dias
Keyword(s):  
Three Dimensional ◽  
Middle Layer ◽  
Air Permeability ◽  
Structure Design ◽  
Experimental Results ◽  
Knitted Fabric ◽  
High Porosity ◽  
Compression Properties ◽  
Plain Knitted Fabric ◽  
Spacer Fabric

The main content dealt with in the paper is to present a kind of weft-knitted spacer fabric with high porosity. It is a kind of three-dimensional textile fabric with a sandwich structure that consists of a middle layer of multifilament and two outer layers of plain-knitted fabric. Compared with traditional warp-knitted spacer fabric as cushion mats, weft-knitted spacer fabric is well used as apparel for good softness, thermal/moisture comfort, and air permeability. Therefore, three structures were designed and nine samples were prepared by choosing plain-knitted fabric as the outer layers and selecting soft and thin multifilament as a middle layer. Experimental results show that this kind of weft-knitted spacer fabrics has high porosity, greater than 86%, and also demonstrate that the weft-knitted spacer fabric is suitable for comfortable apparel based on experimental results of air permeability, compression properties, stiffness, and thermal insulation properties.

Properties of cotton/T-400 and 100% cotton plain knitted fabric made from ring spun yarn

2014 ◽  
Vol 45 (11) ◽  
pp. 1039-1044 ◽  
Author(s):  
N. T. Akankwasa ◽  
W. Jun ◽  
Z. Yuze ◽  
M. Mushtaq
Keyword(s):  
Knitted Fabric ◽  
Spun Yarn ◽  
Plain Knitted Fabric ◽  
Ring Spun Yarn

scholarly journals The Role of Yarn Counts and Polyester/Cotton Blends in Comfort of Knitted Fabric

2017 ◽  
Vol 60 (3) ◽  
pp. 162-168
Author(s):  
Muhammad Qamar Tusief ◽  
Nabeel Amin ◽  
Nasir Mahmood ◽  
Muhammad Babar Ramzan ◽  
Hafiz Rehan Saleem
Keyword(s):  
Negative Impact ◽  
Knitted Fabric ◽  
Drying Time ◽  
Clothing Comfort ◽  
Yarn Properties ◽  
Plain Knitted Fabric ◽  
Vertical Wicking ◽  
The Social ◽  
Blend Ratios

There have been three major concerns regarding the clothing comfort, psychological, sensorialand thermo-physiological comfort. However, there is lack of work on thermo-physiological comfort ofknitted fabric. Hence the present study is conducted to fulfill this gap by analyzing physiological comfortin sense of air permeability, absorbency, vertical wicking and drying time of plain knitted fabric. Clothingcomfort is mainly affected by type of fibres, yarn properties, structure of fabric, finishing treatments, andclothing conditions. In this study the effect of various yarn counts and polyester/cotton blend ratios on thecomfort of knitted fabric has been analyzed using Statistical Package for the Social Sciences (SPSS). Itis depicted from the results that the selected variables put direct influences on the thermo-physiologicalcomfort of the knitted fabric. The increasing share of polyester in the blend and the fine count for yarnput negative impact on the comfort of the knitted fabric.

The Comfort of Knitted Fabric as Affected by its Structure

2016 ◽  
Vol 59 (1) ◽  
pp. 52-55
Author(s):  
Muhammad Qamar Tusief ◽  
Nabeel Amin ◽  
Mudassar Abbas ◽  
Zahid Hussain
Keyword(s):  
Knitted Fabric ◽  
Fabric Structure ◽  
Plain Knitted Fabric

The present study was carried to investigate the effect of various knitted fabric structure on itscomfort related properties. It was observed that, all comfort properties of knitted fabric have direct relationto its structure. The plain knitted fabric was found best for optimum comfort.

Sign in / Sign up

Export Citation Format

Share Document