Programed oil generation of the Zubair Formation, Southern Iraq oil fields: results from Petromod software modeling and geochemical analysis

2010 ◽  
Vol 4 (7-8) ◽  
pp. 1239-1259 ◽  
Author(s):  
Thamer Khazal Al-Ameri ◽  
Janet Pitman ◽  
Madhat E. Naser ◽  
John Zumberge ◽  
Hiba Adil Al-Haydari
2012 ◽  
Vol 6 (10) ◽  
pp. 3783-3808 ◽  
Author(s):  
Thamer K. Al-Ameri ◽  
Mohamed S. A. Jafar ◽  
Janet Pitman

2019 ◽  
pp. 1322-1335
Author(s):  
Zain Alabdeen A. Al-Shawi ◽  
Maher M. Mahdi ◽  
Abbas H. Mohammed

Shuaiba Formation is an important formation in Iraq, because of their deposition in the important period during the geological history of Arabian plate. The study is focused on a number of selected wells from several fields in southern Iraq, despite the many of oil studies to Shuaiba Formation but it lacks to paleontological studies. Four selected wells are chosen for the current study, Zb-290, Ru-358, R-624, WQ1-353, the selected wells are located within different fields, these are Zubair, Rumaila and West Qurna Oil Fields. In this study fourteen species followed to genus Hedbergella were discovered for first time as well as three genera followed to genus Heterohelix in the Shuaiba Formation at the different oil fields, Hedbergella tunisiensis Range Zone is suggested biozone to the current study, the age of this biozone is Aptian, most of the other genera located within this zone.


2020 ◽  
pp. 2998-3005
Author(s):  
Nowfal A. Nassir ◽  
Ahmed S. Al-Banna ◽  
Ghazi H. Al-Sharaa

The detailed data of the Vp/Vs ratio and porosity logs were used to detect the Oil-Water Contact Zone (OWCZ) of Nahr Umr sandstone and Mishrif limestone reservoir formations in Kumiat (Kt) and Dujaila (Du) oil fields, southeastern Iraq. The results of OWC were confirmed using P-wave, Resistivity, and Water Saturation (Sw) logs of Kt-1 and Du-1 wells. It was found that the values of the oil-water contact zone thickness in Nahr Umr sandstone and Mishrif limestone were approximately one meter and eight meters, respectively. These results suggest that the OWCZ is possibly thicker in the carbonate rock than clastic rock formations. The thickness of OWCZ in the clastic rocks changed from one part to another, depending on several factors including mineral composition, grain size, porosity, pore shape, and fluid type.


2021 ◽  
pp. 565-577
Author(s):  
Nowfal A. Nassir ◽  
Ahmed S. AL- Banna ◽  
Ghazi H. Al-Sharaa

The estimation of rock petrophysical parameters is an essential matter to characterize any reservoir. This research deals with the evaluation of  effective porosity (Pe), shale volume (Vsh) and water saturation (Sw) of reservoirs at Kumait and Dujalia fields, which were analyzed from well log and seismic data. The absolute acoustic impedance (AI) and relative acoustic impedance (RAI) were derived from a model which is based on the inversion of seismic 3-D post-stack data. NahrUmr formation’s sand reservoirs are identified by the RAI section of the study area. Nahr Umr sand-2 unit in Kumait field is the main reservoir; its delineation depends on the available well logs and AI sections information. The results of well logging interpretation showed a decrease of Sw and Vsh and an increase of effective porosity in the oil reservoir area, which coincides with the decrease of AI values. The existence of the water reservoir in Du-2 well revealed a convergence of the results of AI and effective porosity with those of Kumait wells , along with and some differential results of Sw and Vsh values that may be related to changes in lithology and fluid density.


2016 ◽  
Author(s):  
Samuel Salufu ◽  
Rita Onolemhemhen ◽  
Sunday Isehunwa

ABSTRACT This paper sought to use information from outcrop sections to characterize the source and reservoir rocks in a basin in order to give indication(s) for hydrocarbon generation potential in a basin in minimizing uncertainty and risk that are allied with exploration and field development of oil and gas, using subsurface data from well logs, well sections, seismic and core. The methods of study includes detailed geological, stratigraphical, geochemical, structural,, petro-graphical, and sedimentological studies of rock units from outcrop sections within two basins; Anambra Basin and Abakaliki Basin were used as case studies. Thirty eight samples of shale were collected from these Basins; geochemical analysis (rockeval) was performed on the samples to determine the total organic content (TOC) and to assess the oil generating window. The results were analyzed using Rock wares, Origin, and Surfer software in order to properly characterize the potential source rock(s) and reservoir rock(s) in the basins, and factor(s) that can favour hydrocarbon traps. The results of the geological, stratigraphical, sedimentological, geochemical, and structural, were used to developed a new model for hydrocarbon generation in the Basins. The result of the geochemical analysis of shale samples from the Anambra Basin shows that the TOC values are ≥ 1wt%, Tmax ≥ 431°C, Vitrinite reflectance values are ≥ 0.6%, and S1+S2 values are > 2.5mg/g for Mamu Formation while shale samples from other formations within Anambra Basin fall out of these ranges. The shale unit in the Mamu Formation is the major source rock for oil generation in the Anambra Basin while others have potential for gas generation with very little oil generation. The shale samples from Abakaliki Basin shows that S1+S2 values range from< 1 – 20mg/g, TOC values range from 0.31-4.55wt%, vitrinite reflectance ranges from 0.41-1.24% and Tmax ranges from423°C – 466°C. This result also shows that there is no source rock for oil generation in Abakaliki Basin; it is either gas or graphite. This observation indicates that all the source rocks within Abakaliki Basin have exceeded petroleum generating stage due to high geothermal heat resulting from deep depth or the shale units have not attained catagenesis stage as a result of S1+S2 values lesser than 2.5mg/g despite TOC values of ≥ 0.5wt% and vitrinite reflectance values of ≥ 0.6%. The novelty of this study is that the study has been able to show that here there is much more oil than the previous authors claimed, and the distribution of this oil and gas in the basins is controlled by two major factors; the pattern of distribution of the materials of the source rock prior to subsidence and during the subsidence period in the basin, and the pattern and the rate of tectonic activities, and heat flow in the basin. If these factors are known, it would help to reduce the uncertainties associated with exploration for oil and gas in the two basins.


Sign in / Sign up

Export Citation Format

Share Document