Effect of detailing on performance of steel T-connection under fire loading

Author(s):  
Hamid Saberi ◽  
Vahid Saberi ◽  
Negar Khodamoradi ◽  
Majid Pouraminian ◽  
Abbasali Sadeghi
Keyword(s):  
Author(s):  
M I Zmaha ◽  
S V Pozdieiev ◽  
Y V Zmaha ◽  
O V Nekora ◽  
S O Sidnei
Keyword(s):  

2014 ◽  
Vol 77 ◽  
pp. 207-215 ◽  
Author(s):  
Yiming Zhang ◽  
Matthias Zeiml ◽  
Christian Pichler ◽  
Roman Lackner

2019 ◽  
Vol 10 (2) ◽  
pp. 138-154
Author(s):  
Farshid Masoumi ◽  
Ebrahim Farajpourbonab

Purpose The primary purpose of this research was to expand the knowledge base regarding the behavior of steel columns during exposure to fire. This paper presents the numerical study of the effect of heat on the performance of parking steel column in a seven-story steel building under cyclic loading. Design/methodology/approach In this research, the forces and deformations developed during a fire are estimated by using detailed 3D finite-element models. The analyses are in the form of a coupled thermo-mechanical analysis in two types of loading: concurrent loading (fire and cyclic loading) and non-concurrent loading (first fire and then cyclically), and the analyses have been conducted in both states of the fire loading with cooling and without cooling using the ABAQUS software. Further, it was investigated whether, during the fire loading, the specimen was protected by a 3-cm-thick concrete coating and how much it changes the seismic performance. After verification of the specimen with the experimental test results, the column model was investigated under different loading conditions. Findings The result of analyses indicates that the effect of thermal damage on the performance of steel columns, when cooling is happening late, is more than the state in which cooling occurs immediately after the fire. In this paper, thermal–seismic performance of parking steel columns has been specified and the effect of the fire damage has been investigated for the protected steel by concrete coating and to the non-protected steel, under both cooling and non-cooling states. Originality/value This study led to recommendations based on the findings and suggestions for additional work to support performance-based fire engineering. It is clear that predicting force and deformation on steel column during fire is complex and it is affected by many variables. Here in this paper, those variables are examined and proper results have been achieved.


Author(s):  
Sangdo Hong ◽  
Amit H. Varma ◽  
Anil Agarwal ◽  
Kuldeep Prasad

10.14311/1083 ◽  
2009 ◽  
Vol 49 (1) ◽  
Author(s):  
C. Crosti

This paper focuses on the structural analysis of a steel structure under fire loading. In this framework, the objective is to highlight the importance of the right choice of analyses to develop, and of the finite element codes able to model the resistance and stiffness reduction due to the temperature increase. In addition, the evaluation of the structural collapse under fire load of a real building is considered, paying attention to the global behavior of the structure itself. 


Author(s):  
Pierre Ghisbain ◽  
Jenny Sideri ◽  
Reyhaneh Abbasi ◽  
Luciana Balsamo ◽  
Reza Imani ◽  
...  

<p>Analysis of the structural performance under realistic fire scenarios makes Performance Based Fire Engineering (PBFE) particularly suited to design fire protection of tall buildings. In this paper, the impact of using the PBFE method is studied using a standard tall building as an example. The parametric temperature- time curves recommended in Eurocode 1 are used to define the fire loads. The thermal and mechanical response of the building to the imposed fire loading is subsequently analyzed by means of a finite element model of the mixed-use tower. Particular care is devoted to analyzing the performance of a steel truss at a transfer level, to study potential global effects of a local fire, effects that are not studied or understood within the prescriptive design framework.</p>


Sign in / Sign up

Export Citation Format

Share Document