Advantages of the fixed-angle rotor for the separation of density-labelled from unlabelled proteins by isopycnic equilibrium centrifugation

1973 ◽  
Vol 317 (2) ◽  
pp. 219-230 ◽  
Author(s):  
Christopher Johnson ◽  
Terry Attridge ◽  
Harry Smith
2011 ◽  
Vol 93 (1) ◽  
pp. 57-60 ◽  
Author(s):  
DC Perry ◽  
DMG Machin ◽  
JA Casaletto ◽  
DJ Brown

INTRODUCTION Rupture of extensor pollicis longus (EPL) tendon is a recognised complication following volar plate fixation of distal radius fractures, usually from attrition caused by prominent screws. We sought to identify the screw holes in some of the most commonly used plates which may precipitate tendon injury. SUBJECTS AND METHODS Three fixed-angle volar locking plates were sequentially positioned into 18 cadaveric arms. A wire was passed through each of the holes in the plates using a locking guide and the dorsal relationships noted. RESULTS Each plate had specific ‘high-risk’ holes which directed the wire towards the EPL groove. The central screw holes appeared mostly implicated in EPL injury. CONCLUSIONS Awareness of ‘high-risk’ holes and appropriate minor alterations in surgical technique may consequently decrease the incidence of EPL irritation and rupture.


Children ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 495
Author(s):  
Dror Paley ◽  
Claire E. Shannon ◽  
Monica Nogueira ◽  
Catharina Chiari ◽  
Matthew Harris

Congenital femoral deficiency (CFD) Paley type 1b is characterized by severe bony deformity of the upper femur, extra-articular contractures of the hip, and, delayed ossification of the femoral neck and/or subtrochanteric region. The Systematic Utilitarian Procedure for Extremity Reconstruction of the hip (SUPERhip) procedure for the correction of CFD deformities was developed in 1997. Initially, a non-fixed angle device (rush rod) was used for fixation. Late complications of persistent delayed ossification and recurrent varus deformity occurred. In order to reduce and treat such complications, fixation with a fixed angle device and the off-label use of BMP2 to induce ossification of the un-ossified femoral neck were employed. The purpose of this study is to determine if the use of a fixed angle device, and, BMP2 inserted into a drill hole in the cartilage of the femoral neck, decreases the incidence of these late complications. We retrospectively reviewed 72 SUPERhip procedures performed for Paley type 1b CFD between 1997 and 2012. Due to recurrent varus or persistent delayed ossification of the femoral neck, 34 revision SUPERhip procedures were performed. In total, 106 SUPERhip procedures were studied. Sixty-eight SUPERhips were performed using internal fixation without BMP2, while 38 SUPERhips were performed with both internal fixation and the addition of BMP2. Forty-one were performed using non-fixed angle internal fixation while 65 had fixed angle internal fixation. Fixed angle devices significantly reduced the incidence of recurrent varus compared with non-fixed angle devices. Inserting BMP2 in the femoral neck significantly reduced the incidence of persistent delayed ossification. Using only a fixed angle device but no BMP2 did not reduce the incidence of delayed ossification. The combination of both a fixed angle device and BMP2 reduced the incidence of recurrent coxa vara and persistent delayed ossification of the femoral neck. The SUPERhip procedure corrects the pathoanatomy of the proximal femur in CFD Paley type 1b but is associated with a very high risk of recurrence of coxa vara and persistence of femoral neck delayed ossification, unless, a fixed angle internal fixation device is used to prevent recurrent coxa vara and BMP2 is used to induce ossification of the femoral neck.


1997 ◽  
Vol 3 (S2) ◽  
pp. 155-156
Author(s):  
C.E. Hearne ◽  
D.L. Johnson ◽  
H. Van Campen

Pre-embedding immunogold-silver (IGSS) techniques are useful to localize antigens in cell monolayers and agarose embedded cell suspensions for transmission electron microscopy. Procedural centrifugations, however, present a challenge when attempting to localize antigens in subcellular fractions. Using a Beckman Airfuge Ultracentrifuge to concentrate the subcellar fraction bands and resuspending the organelles in agarose simplifies IGSS processing and resin embedding procedures.Control bovine turbinate (BT), and BT cells infected with cytopathic (cp NADL) and non-cytopathic (ncp NY-1) strains of bovine viral diarrhea virus (BVDV) were fractioned according to Bienz et al (1992). Bands containing membrane vesicles (Fig 2) were collected and each fraction band was pelleted at 169,000g for 20 min using an A-95 fixed angle rotor in a Beckman Airfuge Ultracentrifuge. Each fraction pellet was resuspended in 50μl of 30% agarose, solidified, and trimmed to < lmm. IGSS procedures were carried out according to Nanoprobes, Inc., Stoney Brook, NY, and Hearne & Van Campen (1996).


Injury ◽  
2016 ◽  
Vol 47 (8) ◽  
pp. 1737-1743 ◽  
Author(s):  
Michael Wild ◽  
Kai Fischer ◽  
Florian Hilsenbeck ◽  
Mohssen Hakimi ◽  
Marcel Betsch

1983 ◽  
Vol 1 (3) ◽  
pp. 131-136 ◽  
Author(s):  
Laurence K. Grill ◽  
O. Mitch Griffith ◽  
Stephen J. Garger
Keyword(s):  

Author(s):  
C.C. Buron ◽  
C. Filiâtre ◽  
F. Membrey ◽  
C. Bainier ◽  
D. Charraut ◽  
...  

2014 ◽  
Vol 100 ◽  
pp. 70-75 ◽  
Author(s):  
Nicholas Heeder ◽  
Abayomi Yussuf ◽  
Indrani Chakraborty ◽  
Michael P. Godfrin ◽  
Robert Hurt ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document