Water corrosion behavior of densified glass. I. Silicate glass

1991 ◽  
Vol 135 (1) ◽  
pp. 55-61 ◽  
Author(s):  
Zuyi Zhang ◽  
Naohiro Soga ◽  
Kazuyuki Hirao
1991 ◽  
Vol 135 (1) ◽  
pp. 62-66 ◽  
Author(s):  
Zuyi Zhang ◽  
Kazuyuki Hirao ◽  
Naohiro Soga

2011 ◽  
Vol 31 (5) ◽  
pp. 715-721 ◽  
Author(s):  
Rafi Ali Rahimi ◽  
Ali Ahmadi ◽  
Saeid Kakooei ◽  
S.K. Sadrnezhaad

Author(s):  
Ann Chidester Van Orden ◽  
John L. Chidester ◽  
Anna C. Fraker ◽  
Pei Sung

The influence of small variations in the composition on the corrosion behavior of Co-Cr-Mo alloys has been studied using scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDX), and electrochemical measurements. SEM and EDX data were correlated with data from in vitro corrosion measurements involving repassivation and also potentiostatic anodic polarization measurements. Specimens studied included the four alloys shown in Table 1. Corrosion tests were conducted in Hanks' physiological saline solution which has a pH of 7.4 and was held at a temperature of 37°C. Specimens were mechanically polished to a surface finish with 0.05 µm A1203, then exposed to the solution and anodically polarized at a rate of 0.006 v/min. All voltages were measured vs. the saturated calomel electrode (s.c.e.).. Specimens had breakdown potentials near 0.47V vs. s.c.e.


1980 ◽  
Vol 41 (C8) ◽  
pp. C8-862-C8-866
Author(s):  
M. Naka ◽  
K. Hashimoto ◽  
K. Asami ◽  
T. Masumoto

1982 ◽  
Vol 43 (C9) ◽  
pp. C9-143-C9-147 ◽  
Author(s):  
P. Heitjans ◽  
B. Bader ◽  
K. Dörr ◽  
H. J. Stöckman ◽  
G. Kiese ◽  
...  

2013 ◽  
Vol 51 (1) ◽  
pp. 033-039
Author(s):  
Hae Woo Lee ◽  
Jae Hyeok Jeon ◽  
Ja Young Hong

Sign in / Sign up

Export Citation Format

Share Document