Factors affecting the growth and the mechanical and physical properties of bismuth single crystals

Wood–plastic composites (WPC) with good mechanical and physical properties are desirable products for manufacturers and customers, and interfacial bond strength is one of the most critical factors affecting WPC performance. To verify that a higher interfacial bond strength between wood and thermoplastics improves WPC performance, wood veneer–thermoplastic composites (VPC) and oriented strand–thermoplastic composites (OSPC) were fabricated using hot pressing. The effects of the coupling agent (KH550 or MDI) and the thermoplastic (LDPE, HDPE, PP, or PVC) on the interfacial bond strength of VPC, and the mechanical and physical properties of OSPC, were investigated. The results showed that coupling agents KH550 and MDI improved the interfacial bond strength between wood and thermoplastics under dry conditions. MDI was better than KH550 at improving the interfacial bond strength and the mechanical properties of OSPC. Better interfacial bonding between plastic and wood improved the OSPC performance. The OSPC fabricated using PVC film as the thermoplastic and MDI as the coupling agent displayed the highest mechanical properties, with a modulus of rupture of 91.9 MPa, a modulus of elasticity of 10.9 GPa, and a thickness swelling of 2.4%. PVC and MDI are recommended to fabricate WPCs with desirable performance for general applications.

Download Full-text

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

Jurnal Riset Industri Hasil Hutan ◽

10.24111/jrihh.v4i1.1195 ◽

2012 ◽

Vol 4 (1) ◽

pp. 1

Author(s):

Djoko Purwanto

Keyword(s):

Mechanical Properties ◽

Compressive Strength ◽

Physical Properties ◽

Treatment Process ◽

Acacia Mangium ◽

Physical And Mechanical Properties ◽

Wood Fibers ◽

Test Parameters ◽

Mechanical And Physical Properties ◽

Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

Download Full-text