Comparative analysis of bearing capacity of large diameter bored pile

1991 ◽  
Vol 28 (2-3) ◽  
pp. A109
Keyword(s):  
Comparative Analysis ◽  
Bearing Capacity ◽  
Large Diameter ◽  
Bored Pile

Testing Study on Bearing Behavior of Belled Large-Diameter PHC Pipe Pile by NAKS (Nakabori Kakutei System) Construction Method

2013 ◽  
Vol 353-356 ◽  
pp. 533-539 ◽  
Author(s):  
Wen Xu ◽  
Yu Bin Hou
Keyword(s):  
Bearing Capacity ◽  
Large Diameter ◽  
Field Testing ◽  
Construction Method ◽  
Load Test ◽  
Test Field ◽  
Static Load Test ◽  
Pipe Pile ◽  
Bored Pile ◽  
Bearing Behavior

Through field static load test and pile shaft axial force test, field testing study is conducted on bearing behavior of NAKS-construction-method belled large-diameter PHC pipe pile; besides, the test result is compared with that of hammering-method PHC pipe pile and bored pile with same pile length and diameter under the same site condition. The result shows that the ultimate bearing capacity of NAKS-construction-method belled large-diameter PHC pipe pile is slightly inferior to hammering-method PHC pipe pile but obviously superior to that of bored pile. Compared with traditional hammering-method pipe pile, the pile side resistance of NAKS-construction-method belled pipe pile is smaller; however, the higher toe resistance will give better play to bearing capacity of bearing stratum of pile toe; moreover, it is found that under the action of ultimate load and failure load, the maximum settlement and final settlement of NAKS-construction-method belled pipe pile tip are obviously lower than that of other test piles, which is conductive to lessening foundation settlement of upper structure.

The Grouting Bored Pile Perfusing Pile Bearing Capacity after Effect Factors of the Finite Element Analysis

2012 ◽  
Vol 461 ◽  
pp. 351-354
Author(s):  
Shao He Li ◽  
Qun Xian Lin
Keyword(s):  
Finite Element ◽  
Comparative Analysis ◽  
Bearing Capacity ◽  
Influence Factors ◽  
Element Model ◽  
Model Parameters ◽  
Single Pile ◽  
Element Analysis ◽  
Bored Pile ◽  
After Effect

This article take the Zhejiang some project engineering geology condition as a background, Through comparative analysis with single pile load, determine the model parameters of ANSYS finite element, The ANSYS finite element model of single pile, Respectively on the Grouting pile and Grouting for grouting of pile modulus change and Grouting in body size and changes of modulus of pile-end soils and a series of comparative analysis of the situation and analysis on bearing capacity of bored pile tip Grouting influence factors and of the main causes, draw some useful conclusions.

Response of Laterally Loaded Large-Diameter Bored Pile Groups

2001 ◽  
Vol 127 (8) ◽  
pp. 658-669 ◽  
Author(s):  
Charles W. W. Ng ◽  
Limin Zhang ◽  
Dora C. N. Nip
Keyword(s):  
Large Diameter ◽  
Pile Groups ◽  
Bored Pile ◽  
Laterally Loaded
Sign in / Sign up

Export Citation Format

Share Document