Potential use of sludge ash as construction material

1986 ◽  
Vol 13 (1) ◽  
pp. 53-58 ◽  
Author(s):  
Joo-Hwa Tay
Author(s):  
Mohammed Seddik Meddah ◽  
Naima Benkari ◽  
Mohamed Al-Busaidi

2012 ◽  
Vol 501 ◽  
pp. 34-38 ◽  
Author(s):  
Kar Keng Lim ◽  
Roslinda Shamsudin ◽  
Muhammad Azmi Abdul Hamid

In this study, paper sludge ash, a waste from pulp and paper industry was used as a filler in fabricating Plaster of Paris/paper sludge ash composites. Various percentage of paper sludge ash was used, namely 1wt.%, 3wt.%, 5wt.% and 7wt.%. The effect of paper sludge ash on the compressive strength of the Plaster of Paris was studied. The mixed powder of paper sludge ash and Plaster of Paris were form into a 6 mm diameter and 12 mm height cylindrical samples. The composites were characterized theirs density where it shows that the density decreased as the amount of paper sludge ash increased. The compressive strength of the composites also decreased from 11.67 MPa without paper sludge ash addition to 0.50 MPa at 7wt.% paper sludge ash. However, the requirement of strength for Plaster of Paris in industry is between 8.96 MPa to 20.68 MPa. From the SEM observation, sample contain higher percentage of paper sludge ash exhibited more porosity. Therefore with the addition of 1wt.% of paper sludge ash into Plaster of Paris can be a promising construction material.


Author(s):  
Judith E. Halliday ◽  
M. Rod Jones ◽  
Thomas D. Dyer ◽  
Ravindra K. Dhir

2009 ◽  
Vol 15 (2) ◽  
pp. 149-157 ◽  
Author(s):  
John Kinuthia ◽  
David Snelson ◽  
Albinas Gailius

This paper reviews one way in which colliery spoil can be utilized in low‐strength concrete. Colliery Spoil (CS) (minestone), a by‐product of coal mining, is abundant in most parts of the world. It has potential as a construction material but it has not been fully appreciated. This is partly because colliery spoil is not easy to utilize, due a number of drawbacks. The major problems identified in attempts to utilize CS in construction include excessive wear, expansive behaviour, leaching of heavy metals and even radioactivity. Thus, to date, the bulk of the CS utilization is limited to isolated cases of highway embankments, backfilling of mines, quarries and other surface tips, or in extreme cases subjected to marine and other disposal. This paper reports on the scope of technological benefits of utilizing colliery spoil (CS) in low to medium strength concrete. There has been intermittent pursuance of the benefits of utilizing colliery spoil in the United Kingdom. However, there is still no well‐accepted and/or positive feedback on any colliery‐based technology and/or construction material, apart from that relating its use for bulk fill. This research was triggered by proximity of large supplies of both CS and slag in South Wales, UK, as well as the authors’ interest in advances in sustainable construction. Two fractions of colliery spoil were mixed in equal proportions and used for concrete where the binder was PC, or novel binders comprising of either Wastepaper Sludge Ash (WSA) or WSA combined in equal proportions with Ground Granulated Blastfurnace Slag (GGBS), themselves industrial wastes or by‐product materials. Compressive strength of compacted cube specimens was monitored for a period of up to 56 days of curing. Results indicate that the performance of systems incorporating CS and WSA were of very poor workability, but the resultant strength was within the low to medium category usable for blinding concrete and or for use in bound granular fill or foundations. Santrauka Anglies kasyklų atliekos yra potenciali ekologiška žaliava statybos dirbiniams gaminti, tačiau iki šiol neištirtos jos savybės ir naudojimo galimybės. Staripsnyje pateikti tyrimų rezultatai rodo, kaip, taikant specialias technologijas, savybes modifikuojančius priedus, kompozicines rišamąsias medžiagas, galima anglies kasyklų atliekas naudoti vidutinio stiprumo tvariam betonui gaminti.


2014 ◽  
Vol 64 (313) ◽  
pp. e002 ◽  
Author(s):  
M. Pérez-Carrión ◽  
F. Baeza-Brotons ◽  
J. Payá ◽  
J. M. Saval ◽  
E. Zornoza ◽  
...  

2018 ◽  
Vol 15 (1) ◽  
pp. 47
Author(s):  
NURUL NAZIERAH MOHD YUSRI ◽  
KARTINI KAMARUDDIN ◽  
HAMIDAH MOHD SAMAN ◽  
NURAINI TUTUR

Sewage sludge is a by-product generated within the wastewater treatment process. Severe concern arised as the sludge are massively been dumped to the landfill and it may affect the environment. Many studies had been conducted in reusing the sewage sludge as construction material, where it is one of the optional ways to solve the issue. In this study, dried sewage sludge was incinerated with two different temperatures in order to produce sewage sludge ash (SSA), which are 800°C and 1000°C. After few processes, this SSA then reused in mortar as cement replacement with the replacement percentage of 5%, 10%, 15% and 20% by weight. The strength performance of mortar specimens was investigated after 7, 28, 60 and 90 days of curing. From the results, it is clearly showed that the compressive strength of all mortar specimens increased when the period of curing was prolonged. Moreover, almost all compressive strength of SSA mortars was higher than the control mortar. Therefore, there is potential to reuse this waste material as part of construction materials and hence, its plays an important role for future researches in minimisation of waste.


2020 ◽  
Vol 242 ◽  
pp. 118160 ◽  
Author(s):  
Yi-fan Zhou ◽  
Jiang-shan Li ◽  
Jian-xin Lu ◽  
Chris Cheeseman ◽  
Chi Sun Poon

Sign in / Sign up

Export Citation Format

Share Document