An assessment of the feasibility of solar absorption and vapor compression cooling systems

1981 ◽  
Vol 21 (2) ◽  
pp. 163-169 ◽  
Author(s):  
S. Ayyash
2017 ◽  
Vol 3 (2) ◽  
Author(s):  
Rofan Aziz ◽  
Muh Tanwirul Afkar ◽  
Sunanto Sunanto ◽  
Karsid Karsid

Conventional cooling systems based on vapor compression have a high coefficient of performance (COP). However shortage of vapor compression cooling systems still using refrigerants that have detrimental effects on the environment. For that purpose, the research of fruit and vegetable storage machine using thermoelectric system TEC1-12706 with temperature control system using arduino. In this study the temperature in the cabin can be stable at 15° C and still feasible for use as a storage of fruits and vegetables.


Author(s):  
Abdul Ahad Iqbal ◽  
Ali Al-Alili

Abstract The performance of air conditioning systems is highly dependent on the environmental conditions of the high pressure side, where heat is rejected to the environment. Air conditioning systems utilize dry cooling systems which often don’t provide adequate cooling during peak cooling periods, or wet cooling systems which consume a lot of water. In this study, a novel hybrid cooling system that can provide both wet and dry cooling was modelled in TRNSYS, and used to provide cooling to closed sorption air conditioning systems. The performance of these systems with the hybrid cooling system was compared to the performance of a standard vapor compression cooling system being cooled by a dry cooling system. The COPsol of the vapor compression cooling system exhibited a decrease of almost 26% during the summer period, whereas the COPsol of the sorption systems increased by around 30%. Similarly, the cooling capacity of the vapor compression cooling system dropped by almost 5%, and for the sorption systems, it increased by around 20% during the summer period.


2021 ◽  
Vol 143 ◽  
pp. 110912
Author(s):  
Mohamed G. Gado ◽  
Shinichi Ookawara ◽  
Sameh Nada ◽  
Ibrahim I. El-Sharkawy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yoshihisa Kosugi ◽  
Masato Goto ◽  
Zhenhong Tan ◽  
Daisuke Kan ◽  
Masahiko Isobe ◽  
...  

AbstractCaloric effects of solids can provide us with innovative refrigeration systems more efficient and environment-friendly than the widely-used conventional vapor-compression cooling systems. Exploring novel caloric materials is challenging but critically important in developing future technologies. Here we discovered that the quadruple perovskite structure ferrimagnet BiCu3Cr4O12 shows large multiple caloric effects at the first-order charge transition occurring around 190 K. Large latent heat and the corresponding isothermal entropy change, 28.2 J K−1 kg−1, can be utilized by applying both magnetic fields (a magnetocaloric effect) and pressure (a barocaloric effect). Adiabatic temperature changes reach 3.9 K for the 50 kOe magnetic field and 4.8 K for the 4.9 kbar pressure, and thus highly efficient thermal controls are achieved in multiple ways.


2005 ◽  
Vol 16 (4) ◽  
pp. 59-66 ◽  
Author(s):  
V Mittal ◽  
KS Kasana ◽  
NS Thakur

An air-conditioning system utilizing solar energy would generally be more efficient, cost wise, if it was used to provide both heating and cooling requirements in the building it serves. Various solar powered heating systems have been tested extensively, but solar powered air conditioning systems have received very little attention. Solar powered absorption cooling systems can serve both heating and cooling requirements in the building it serves. Many researchers have studied the solar absorption air conditioning system in order to make it economically and technically viable. But still, much more research in this area is needed. This paper will help many researchers working in this area and provide them with fundamental knowledge on absorption systems, and a detailed review on the past efforts in the field of solar absorption cooling systems with the absorption pair of lithium-bromide and water. This knowledge will help them to start the parametric study in order to investigate the influence of key parameters on the overall system performance.


Sign in / Sign up

Export Citation Format

Share Document