Twice squaring method: Non-linear acoustic signal processing technique for real-time detection of sodium boiling

1996 ◽  
Vol 23 (10) ◽  
pp. 863-875 ◽  
Author(s):  
K. Hayashi ◽  
Y. Shinohara ◽  
K. Watanabe ◽  
K. Nabeshima
Keyword(s):  
Signal Processing ◽  
Real Time ◽  
Acoustic Signal ◽  
Processing Technique ◽  
Signal Processing Technique ◽  
Non Linear ◽  
Real Time Detection

scholarly journals Application of UAV in Search and Rescue Actions in Underground Mine—A Specific Sound Detection in Noisy Acoustic Signal

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3725
Author(s):  
Paweł Zimroz ◽  
Paweł Trybała ◽  
Adam Wróblewski ◽  
Mateusz Góralczyk ◽  
Jarosław Szrek ◽  
...  
Keyword(s):  
Signal Processing ◽  
Acoustic Signal ◽  
Processing Technique ◽  
Underground Mine ◽  
Search And Rescue ◽  
Reference Spectrum ◽  
Signal Processing Technique ◽  
Time Frequency ◽  
Communication Device ◽  
Frequency Representation

The possibility of the application of an unmanned aerial vehicle (UAV) in search and rescue activities in a deep underground mine has been investigated. In the presented case study, a UAV is searching for a lost or injured human who is able to call for help but is not able to move or use any communication device. A UAV capturing acoustic data while flying through underground corridors is used. The acoustic signal is very noisy since during the flight the UAV contributes high-energetic emission. The main goal of the paper is to present an automatic signal processing procedure for detection of a specific sound (supposed to contain voice activity) in presence of heavy, time-varying noise from UAV. The proposed acoustic signal processing technique is based on time-frequency representation and Euclidean distance measurement between reference spectrum (UAV noise only) and captured data. As both the UAV and “injured” person were equipped with synchronized microphones during the experiment, validation has been performed. Two experiments carried out in lab conditions, as well as one in an underground mine, provided very satisfactory results.

scholarly journals Thermal Modulation of a High-Bandwidth Gas Sensor Array in Real-Time for Application on a Mobile Robot

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 858 ◽  
Author(s):  
Timothy A. Vincent ◽  
Yuxin Xing ◽  
Marina Cole ◽  
Julian W. Gardner
Keyword(s):  
Signal Processing ◽  
Mobile Robot ◽  
Real Time ◽  
Low Cost ◽  
Processing Technique ◽  
Signal Processing Technique ◽  
Baseline Drift ◽  
Gas Sensor Array ◽  
Sensor Module ◽  
High Bandwidth

A new signal processing technique has been developed for resistive metal oxide (MOX) gas sensors to enable high-bandwidth measurements and enhanced selectivity at PPM levels (<50 PPM VOCs). An embedded micro-heater is thermally pulsed from 225 to 350 °C, which enables the chemical reactions in the sensor film (e.g., SnO2, WO3, NiO) to be extracted using a fast Fourier transform. Signal processing is performed in real-time using a low-cost microcontroller integrated into a sensor module. The approach enables the remove of baseline drift and is resilient to environmental temperature changes. Bench-top experimental results are presented for 50 to 200 ppm of ethanol and CO, which demonstrate our sensor system can be used within a mobile robot.

scholarly journals Understanding the Advanced Signal Processing Technique of Real-Time Adaptive Filters

2009 ◽  
Vol 25 (3) ◽  
pp. 145-160 ◽  
Author(s):  
Hilary Ahman ◽  
Lindsay Thompson ◽  
Amy Swarbrick ◽  
Julie Woodward
Keyword(s):  
Signal Processing ◽  
Real Time ◽  
Adaptive Filters ◽  
Processing Technique ◽  
Signal Processing Technique

scholarly journals A Remote Sensor System Based on TDLAS Technique for Ammonia Leakage Monitoring

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2448
Author(s):  
Hongbin Lu ◽  
Chuantao Zheng ◽  
Lei Zhang ◽  
Zhiwei Liu ◽  
Fang Song ◽  
...  
Keyword(s):  
Signal Processing ◽  
Limit Of Detection ◽  
Processing Technique ◽  
Tunable Diode Laser ◽  
Sensor System ◽  
Signal Processing Technique ◽  
Suppression Effect ◽  
Output Wavelength ◽  
Deviation Analysis ◽  
Remote Sensor

The development of an efficient, portable, real-time, and high-precision ammonia (NH3) remote sensor system is of great significance for environmental protection and citizens’ health. We developed a NH3 remote sensor system based on tunable diode laser absorption spectroscopy (TDLAS) technique to measure the NH3 leakage. In order to eliminate the interference of water vapor on NH3 detection, the wavelength-locked wavelength modulation spectroscopy technique was adopted to stabilize the output wavelength of the laser at 6612.7 cm−1, which significantly increased the sampling frequency of the sensor system. To solve the problem in that the light intensity received by the detector keeps changing, the 2f/1f signal processing technique was adopted. The practical application results proved that the 2f/1f signal processing technique had a satisfactory suppression effect on the signal fluctuation caused by distance changing. Using Allan deviation analysis, we determined the stability and limit of detection (LoD). The system could reach a LoD of 16.6 ppm·m at an average time of 2.8 s, and a LoD of 0.5 ppm·m at an optimum averaging time of 778.4 s. Finally, the measurement result of simulated ammonia leakage verified that the ammonia remote sensor system could meet the need for ammonia leakage detection in the industrial production process.

Sign in / Sign up

Export Citation Format

Share Document