Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy

2018 ◽  
Vol 148 ◽  
pp. 300-310 ◽  
Author(s):  
S.J. Qu ◽  
S.Q. Tang ◽  
A.H. Feng ◽  
C. Feng ◽  
J. Shen ◽  
...  
2019 ◽  
Vol 161 ◽  
pp. 108180 ◽  
Author(s):  
Qiong Lu ◽  
Yanan Hao ◽  
Yuanyuan Wang ◽  
Peizhong Feng ◽  
Jinglian Fan

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 526
Author(s):  
Zhengyuan Li ◽  
Lijia Chen ◽  
Haoyu Zhang ◽  
Siyu Liu

The oxidation behavior and microstructural evolution of the nanostructure of Fe-Cr-Al oxide dispersion strengthened (ODS) alloys prepared by spark plasma sintering were investigated by high-temperature oxidation experiments in air at 1200 °C for 100 h. The formation of Al2O3 scale was observed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) line scans. The oxidation rate of Fe-Cr-Al ODS alloys is lower than that of conventional Fe-Cr-Al alloys, and the oxide layer formed on the Fe-Cr-Al alloy appeared loose and cracked, whereas the oxide layer formed on the Fe-Cr-Al ODS alloys was adherent and flat. This is due to the high density of dispersed nano-oxides hindering the diffusion of Al element and the formation of vacancies caused by them. In addition, the nano-oxides could also adhere to the oxide layer. Besides, the microstructure of the Fe-Cr-Al ODS alloy had excellent stability during high-temperature oxidation.


2012 ◽  
Vol 60 (3) ◽  
pp. 1079-1092 ◽  
Author(s):  
Bai Cui ◽  
Rafael Sa ◽  
Daniel D. Jayaseelan ◽  
Fawad Inam ◽  
Michael J. Reece ◽  
...  

2013 ◽  
Vol 45 (3) ◽  
pp. 1401-1408 ◽  
Author(s):  
Giovanni Pulci ◽  
Jacopo Tirillò ◽  
Francesco Marra ◽  
Fabrizio Sarasini ◽  
Alessandra Bellucci ◽  
...  

2010 ◽  
Vol 65 ◽  
pp. 106-111
Author(s):  
Bai Cui ◽  
Rafael Sa ◽  
Daniel Doni Jayaseelan ◽  
Fawad Inam ◽  
Michael J. Reece ◽  
...  

Microstructural evolution of Ti2AlN ceramics during high-temperature oxidation in air has been revealed by X-ray diffraction (XRD), field emission gun scanning electron microscopy (FEGSEM), and energy-dispersive spectroscopy (EDS). After oxidation below 1200 °C, layered microstructures formed on Ti2AlN surfaces containing anatase, rutile, and α-Al2O3. Above 1200 °C, more complex layered microstructures formed containing Al2TiO5, rutile, α-Al2O3, and continuous void layers. With increasing temperature, anatase gradually transformed to rutile, and TiO2 reacted with α-Al2O3 to form Al2TiO5. Based on these microstructural observations, an oxidation mechanism for Ti2AlN ceramics is proposed.


Sign in / Sign up

Export Citation Format

Share Document