scholarly journals Epitaxial deposition of nickel-based superalloy René 142 through scanning laser epitaxy (SLE)

2018 ◽  
Vol 22 ◽  
pp. 665-671 ◽  
Author(s):  
Amrita Basak ◽  
Ranadip Acharya ◽  
Suman Das
Author(s):  
JS Deitch ◽  
KL Smith ◽  
JW Swann ◽  
JN Turner

Neurons labeled with horseradish peroxidase and reacted with diaminobenzidine (DAB) can be imaged using a confocal scanning laser microscope (CSLM) in the reflection mode. In contrast to fluorescent markers, the DAB reaction product is thought to be stable and can be observed by both light and electron microscopy. We have investigated the sensitivity of the DAB reaction product to laser irradiation, and present the spectrophotometric properties of DAB before and after exposure in the CSLM.Pyramidal neurons in slices of rat hippocampus were injected with biocytin (a biotin-lysine complex), fixed overnight in 4% paraformaldehyde, and vibratome sectioned at 75 μm. Biocytin was detected with avidin-HRP (1:200) in 0.5% Triton X-100, incubated in DAB (0.5 mg/ml) with or without 0.04% nickel ammonium sulfate (Ni), dehydrated, and imaged in a Bio Rad MRC-500 CSLM with an argon ion laser (488 and 514 nm). Spectrophotometric measurements of the soma were made on a Zeiss microspectrophotometer, as a function of laser exposure (100-1000 scans) and staining protocol.


Author(s):  
Marcus D. Benedetto ◽  
Joseph S. Rosenshein ◽  
Ernest M. Gaynes ◽  
Morris J. Mintz ◽  
Arnold H. Gordon ◽  
...  

2013 ◽  
Vol 58 (1) ◽  
pp. 95-98 ◽  
Author(s):  
M. Zielinska ◽  
J. Sieniawski

Superalloy René 77 is very wide used for turbine blades, turbine disks of aircraft engines which work up to 1050°C. These elements are generally produced by the investment casting method. Turbine blades produced by conventional precision casting methods have coarse and inhomogeneous grain structure. Such a material often does not fulfil basic requirements, which concern mechanical properties for the stuff used in aeronautical engineering. The incorporation of controlled grain size improved mechanical properties. This control of grain size in the casting operation was accomplished by the control of processing parameters such as casting temperature, mould preheating temperature, and the use of grain nucleates in the face of the mould. For nickel and cobalt based superalloys, it was found that cobalt aluminate (CoAl2O4) has the best nucleating effect. The objective of this work was to determine the influence of the inoculant’s content (cobalt aluminate) in the surface layer of the ceramic mould on the microstructure and mechanical properties at high temperature of nickel based superalloy René 77. For this purpose, the ceramic moulds were made with different concentration of cobalt aluminate in the primary slurry was from 0 to 10% mass. in zirconium flour. Stepped and cylindrical samples were casted for microstructure and mechanical examinations. The average grain size of the matrix ( phase), was determined on the stepped samples. The influence of surface modification on the grain size of up to section thickness was considered. The microstructure investigations with the use of light microscopy and scanning electron microscopy (SEM) enable to examine the influence of the surface modification on the morphology of ’ phase and carbides precipitations. Verification of the influence of CoAl2O4 on the mechanical properties of castings were investigated on the basis of results obtained form creep tests.


Sign in / Sign up

Export Citation Format

Share Document