An innovative method for nuclear emergency source term evaluation based on pressure vessel water level

2018 ◽  
Vol 122 ◽  
pp. 309-316 ◽  
Author(s):  
Xiaohui Sun ◽  
Xinrong Cao ◽  
Xingwei Shi
Author(s):  
Thimo Brähler ◽  
Tobias Risken ◽  
Marco K. Koch

In this paper the Accident Source Term Evaluation Code (ASTEC) is validated against the blowdown experiments Marviken M19 and M24. These tests mainly differed by the mass flow of the released steam from the pressure vessel and the configuration of the vent pipes in the pressure suppression chamber — while in M19 all vent pipes were arranged to one pool, in M24 they were split up by 27 pipes in one and one pipe in another pool. For the simulation of both tests, an existing model of the facility for another lumped parameter code COCOSYS was transferred to ASTEC. In this data set a simple zone and a flow connection was used to model the pressure suppression chamber. Further simulations were performed with another approach for the pressure suppression chamber, so called “DRASYS”-zones. Using the DRASYS model, the user has to specify more inputs for the geometry of the pressure suppression chamber. The results of the simulations are in good agreement to the measured pressure and temperature of both tests. By using the DRASYS model in ASTEC, the results were improved slightly for M19 compared to the simple pressure suppression zone model. In opposite, the results of the simple model are in better agreement to M24. Overall the conclusion is that ASTEC is able to simulate a Blow Down in plant scale with both models.


Author(s):  
Dong-Keun Cho ◽  
GwangMin Sun ◽  
JongWon Choi ◽  
Donghyeun Hwang ◽  
Hak-Soo Kim ◽  
...  

There are now twenty commercial nuclear power reactors operating as of May 2010 in South Korea. As nuclear capacity becomes higher and installations age, the Korean government and industry have launched R&D to estimate appropriate decommissioning costs of power reactors. In this paper, MCNP/ORIGEN2 code system which is being developed as a source term evaluation tool was verified by comparing the estimated nuclide inventory from MCNP/ORIGEN2 simulation with the measured nuclide inventory from chemical assay in an irradiated pressure tube discharged from Wolsong Unit 1 in 1994. Equilibrium core model of Wolsoung unit 1 was used as a neutron source to activate in-core and ex-core structural components. As a result, the estimated values from the analysis system agreed with measured data within 20% difference. Therefore, it can be concluded that MCNP/ORIGEN system could be a reliable tool to estimate source terms of decommissioning wastes from CANDU reactor, although this system assumes constant flux irradiation and snapshot equilibrium core model as a reference core.


Author(s):  
Atso Suopaja¨rvi ◽  
Teemu Ka¨rkela¨ ◽  
Ari Auvinen ◽  
Ilona Lindholm

The release of ruthenium in oxygen-rich conditions from the reactor core during a severe accident may lead to formation of significantly more volatile ruthenium oxides than produced in steam atmosphere. The effect of volatile ruthenium release in a case a reference BWR nuclear plant was studied to get rough-estimates of the effects on the spreading of airborne ruthenium inside the containment and reactor building and the fission product source term. The selected accident scenario starting during shutdown conditions with pressure vessel upper head opened was a LOCA with a break in the bottom of the RPV. The results suggest that there is a remarkable amount of airborne Ru in the containment atmosphere, unlike with the standard MELCOR Ru release model which predicts no airborne Ru at all in the selected case. The total release of ruthenium from the core can be 5000 times the release predicted by the standard model. Based on the performed plant scoping studies it seems reasonable to take the release of volatile ruthenium oxides into account when assessing source terms for plants during shutdown states.


2015 ◽  
Vol 67 (3) ◽  
pp. 627-630 ◽  
Author(s):  
F. Virot ◽  
M. Barrachin ◽  
F. Cousin

Author(s):  
Sheng Fang ◽  
Hong Li ◽  
Jianzhu Cao ◽  
Wenqian Li ◽  
Feng Xie ◽  
...  

China is now designing and constructing a high temperature gas cooled reactor-pebble bed module (HTR-PM). In order to investigate the future decommissioning approach and evaluate possible radiation dose, gamma dose rate near the reactor pressure vessel was calculated for different cooling durations using QAD-CGA program. The source term of this calculation was provided by KORIGEN program. Based on the calculated results, the spatial distribution and temporal changes of gamma dose rate near reactor pressure vessel was systematically analyzed. A suggestion on planning decommissioning operation of reactor pressure vessel of HTR-PM was given based on calculated dose rate and the Chinese Standard GB18871-2002.


1987 ◽  
Vol 112 ◽  
Author(s):  
Michael J. Apted ◽  
David W. Engel

AbstractThe Analytical Repository Source-Term (AREST) code has been developed for source-term evaluation of spent fuel as a final waste form in geologic repositories. AREST contains a set of analytical equations for the timedependent diffusional mass transport of both solubility-limited and inventory-limited radionuclides from a spent fuel in a failed container surrounded by a shell of packing or other porous material imbedded in a porous host rock. Three factors that affect release performance are examined: 1) congruent dissolution of the UO2 matrix, 2) chemical instability of the UO2 matrix, with precipitation of a more stable uranium phase within the waste package, and 3) the attenuation of release rate by distribution of containment failures with time.For congruent matrix dissolution, the release rates of included nuclides are proportional to the product of solubility-limited release of uranium and the fractional abundance of the nuclide. For certain conditions, congruent release rates are calculated to be up to 10 orders of magnitude lower than release rates assuming individual solubility-limits. Precipitation of a more stable, lower solubility uranium phase within the waste package is shown to increase release rates from the UO2 matrix compared to the non-precipitation case, in agreement with previous calculations. During the first 300 to 1000 years after repository closure, the distribution of containment failures with time will act to attenuate the peak average release rates of soluble, longlived nuclides, such as iodine-129, to values smaller than release rates below regulatory limits. However, for soluble nuclides with short half-lives, such as cesium-137, a broader distribution of containment failure with constant mean time of failure can actually cause an increase In the peak average release rates.


1974 ◽  
Author(s):  
D.K. Craig ◽  
W.C. Cannon ◽  
R.E. Filipy ◽  
D.D. Mahlum ◽  
V.H. Smith

Sign in / Sign up

Export Citation Format

Share Document