Microbial oil production from corncob acid hydrolysate by oleaginous yeast Trichosporon coremiiforme

2013 ◽  
Vol 49 ◽  
pp. 273-278 ◽  
Author(s):  
Chao Huang ◽  
Xue-fang Chen ◽  
Lian Xiong ◽  
Xiao-yan Yang ◽  
Xin-de Chen ◽  
...  
2012 ◽  
Vol 34 (6) ◽  
pp. 1025-1028 ◽  
Author(s):  
Xue-fang Chen ◽  
Chao Huang ◽  
Lian Xiong ◽  
Xin-de Chen ◽  
Long-long Ma

2016 ◽  
Vol 179 (4) ◽  
pp. 625-632 ◽  
Author(s):  
Gao-Xiang Qi ◽  
Chao Huang ◽  
Xue-Fang Chen ◽  
Lian Xiong ◽  
Can Wang ◽  
...  

2013 ◽  
Vol 172 (4) ◽  
pp. 2197-2204 ◽  
Author(s):  
Chao Huang ◽  
Xue-Fang Chen ◽  
Xiao-Yan Yang ◽  
Lian Xiong ◽  
Xiao-Qing Lin ◽  
...  

2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Pratik Prashant Pawar ◽  
Annamma Anil Odaneth ◽  
Rajeshkumar Natwarlal Vadgama ◽  
Arvind Mallinath Lali

Abstract Background Recent trends in bioprocessing have underlined the significance of lignocellulosic biomass conversions for biofuel production. These conversions demand at least 90% energy upgradation of cellulosic sugars to generate renewable drop-in biofuel precursors (Heff/C ~ 2). Chemical methods fail to achieve this without substantial loss of carbon; whereas, oleaginous biological systems propose a greener upgradation route by producing oil from sugars with 30% theoretical yields. However, these oleaginous systems cannot compete with the commercial volumes of vegetable oils in terms of overall oil yields and productivities. One of the significant challenges in the commercial exploitation of these microbial oils lies in the inefficient recovery of the produced oil. This issue has been addressed using highly selective oil capturing agents (OCA), which allow a concomitant microbial oil production and in situ oil recovery process. Results Adsorbent-based oil capturing agents were employed for simultaneous in situ oil recovery in the fermentative production broths. Yarrowia lipolytica, a model oleaginous yeast, was milked incessantly for oil production over 380 h in a media comprising of glucose as a sole carbon and nutrient source. This was achieved by continuous online capture of extracellular oil from the aqueous media and also the cell surface, by fluidizing the fermentation broth over an adsorbent bed of oil capturing agents (OCA). A consistent oil yield of 0.33 g per g of glucose consumed, corresponding to theoretical oil yield over glucose, was achieved using this approach. While the incorporation of the OCA increased the oil content up to 89% with complete substrate consumptions, it also caused an overall process integration. Conclusion The nondisruptive oil capture mediated by an OCA helped in accomplishing a trade-off between microbial oil production and its recovery. This strategy helped in realizing theoretically efficient sugar-to-oil bioconversions in a continuous production process. The process, therefore, endorses a sustainable production of molecular drop-in equivalents through oleaginous yeasts, representing as an absolute microbial oil factory.


2016 ◽  
Vol 46 (7) ◽  
pp. 704-708 ◽  
Author(s):  
Xue-Fang Chen ◽  
Chao Huang ◽  
Lian Xiong ◽  
Bo Wang ◽  
Gao-Xiang Qi ◽  
...  

2018 ◽  
Vol 22 (3) ◽  
pp. 1-8
Author(s):  
Dalia Mohammed ◽  
Fatma Zaher ◽  
Enass Hassan ◽  
H Maksoud ◽  
E Ramadan

2021 ◽  
Vol 43 (1) ◽  
pp. 80-80
Author(s):  
Cheng Zhao Cheng Zhao ◽  
Qing Song Yao Qing Song Yao ◽  
Can Wang Can Wang ◽  
Mu Tan Luo Mu Tan Luo ◽  
Chao Huang Chao Huang ◽  
...  

To avoid complex procedures in measurement of lipid content of oleaginous yeast especially for that can accumulate microbial lipid in lignocellulosic hydrolysates, fluorescent method using Nile Red as fluorescent dye was applied to measure lipid content of oleaginous yeast Trichosporon dermatis. The fluorescent method was built by fitting of lipid content identified by both conventional gravimetric method and fluorescence intensity of oleaginous yeast. Within the range of lipid content measured, the fitting curves showed linear relationship with good correlation coefficient (R2=0.95), showing this method is suitable for measuring lipid content of T. dermatis in the simulated medium. To evaluate the applicability of this method for lipid fermentation using lignocellulosic acid hydrolysates as substrate, T. dermatis was cultured in corncob acid hydrolysate and rice straw acid hydrolysate and then its lipid content measured by both fluorescent method and gravimetric method were compared. The results showed that the lipid content measured by these two methods were close, therefore, this method was promising for the application in lipid fermentation in lignocellulosic acid hydrolysates.


Sign in / Sign up

Export Citation Format

Share Document