scholarly journals An enumerative formula for the spherical cap discrepancy

2021 ◽  
Vol 390 ◽  
pp. 113409
Author(s):  
Holger Heitsch ◽  
René Henrion
Keyword(s):  
Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1548
Author(s):  
Jiuling Hu ◽  
Lianjin Hong ◽  
Lili Yin ◽  
Yu Lan ◽  
Hao Sun ◽  
...  

At present, high-speed underwater acoustic communication requires underwater transducers with the characteristics of low frequency and broadband. The low-frequency transducers also are expected to be low-frequency directional for realization of point-to-point communication. In order to achieve the above targets, this paper proposes a new type of flextensional transducer which is constructed of double mosaic piezoelectric ceramic rings and spherical cap metal shells. The transducer realizes broadband transmission by means of the coupling between radial vibration of the piezoelectric rings and high-order flexural vibration of the spherical cap metal shells. The low-frequency directional transmission of the transducer is realized by using excitation signals with different amplitude and phase on two mosaic piezoelectric rings. The relationship between transmitting voltage response (TVR), resonance frequency and structural parameters of the transducer is analyzed by finite element software COMSOL. The broadband performance of the transducer is also optimized. On this basis, the low-frequency directivity of the transducer is further analyzed and the ratio of the excitation signals of the two piezoelectric rings is obtained. Finally, a prototype of the broadband ring flextensional underwater transducer is fabricated according to the results of simulation. The electroacoustic performance of the transducer is tested in an anechoic water tank. Experimental results show that the maximum TVR of the transducer is 147.2 dB and the operation bandwidth is 1.5–4 kHz, which means that the transducer has good low-frequency, broadband transmission capability. Meanwhile, cardioid directivity is obtained at 1.4 kHz and low-frequency directivity is realized.


2021 ◽  
Vol 130 (1) ◽  
Author(s):  
Le Truong Thanh ◽  
Le Huy Minh ◽  
Vafi Doumbia ◽  
Christine Amory-Mazaudier ◽  
Nguyen Thanh Dung ◽  
...  

PAMM ◽  
2019 ◽  
Vol 19 (1) ◽  
Author(s):  
Dirk Gründing ◽  
Mathis Fricke ◽  
Dieter Bothe
Keyword(s):  

2020 ◽  
Vol 94 (9) ◽  
Author(s):  
Lars E. Sjöberg

Abstract As the KTH method for geoid determination by combining Stokes integration of gravity data in a spherical cap around the computation point and a series of spherical harmonics suffers from a bias due to truncation of the data sets, this method is based on minimizing the global mean square error (MSE) of the estimator. However, if the harmonic series is increased to a sufficiently high degree, the truncation error can be considered as negligible, and the optimization based on the local variance of the geoid estimator makes fair sense. Such unbiased types of estimators, derived in this article, have the advantage to the MSE solutions not to rely on the imperfectly known gravity signal degree variances, but only the local error covariance matrices of the observables come to play. Obviously, the geoid solution defined by the local least variance is generally superior to the solution based on the global MSE. It is also shown, at least theoretically, that the unbiased geoid solutions based on the KTH method and remove–compute–restore technique with modification of Stokes formula are the same.


1976 ◽  
Vol 75 (2) ◽  
pp. 273-286 ◽  
Author(s):  
J. M. Dorrepaal ◽  
M. E. O'neill ◽  
K. B. Ranger

The axisymmetric streaming Stokes flow past a body which contains a surface concave to the fluid is considered for the simplest geometry, namely, a spherical cap. It is found that a vortex ring is attached to the concave surface of the cap regardless of whether the oncoming flow is positive or negative. A stream surface ψ = 0 divides the vortex from the mainstream flow, and a detailed description of the flow is given for the hemispherical cup. The local velocity and stress in the vicinity of the rim are expressed in terms of local co-ordinates.


Author(s):  
C. W. S. To

A novel approach for determining large nonlinear responses of spatially homogeneous and nonhomogeneous stochastic shell structures under intensive transient excitations is presented. The intensive transient excitations are modeled as combinations of deterministic and nonstationary random excitations. The emphases are on (i) spatially nonhomogeneous and homogeneous stochastic shell structures with large spatial variations, (ii) large nonlinear responses with finite strains and finite rotations, (iii) intensive deterministic and nonstationary random disturbances, and (iv) the large responses of a specific spherical cap under intensive apex nonstationary random disturbance. The shell structures are approximated by the lower order mixed or hybrid strain based triangular shell finite elements developed earlier by the author and his associate. The novel approach consists of the stochastic central difference method, time coordinate transformation, and modified adaptive time schemes. Computed results of a temporally and spatially stochastic shell structure are presented. Computationally, the procedure is very efficient compared with those entirely or partially based on the Monte Carlo simulation, and it is free from the limitations associated with those employing the perturbation approximation techniques, such as the so-called stochastic finite element or probabilistic finite element method. The computed results obtained and those presented demonstrate that the approach is simple and easy to apply.


Sign in / Sign up

Export Citation Format

Share Document