The utilization of waste incineration filter dust (WIFD) in sodium carbonate activated slag mortars

2021 ◽  
Vol 313 ◽  
pp. 125494
Author(s):  
Xuan Ling ◽  
Katrin Schollbach ◽  
Gang Liu ◽  
H.J.H. Brouwers
2016 ◽  
Vol 28 (4) ◽  
pp. 262-273 ◽  
Author(s):  
Susan A. Bernal ◽  
Rackel San Nicolas ◽  
Jannie S. J. van Deventer ◽  
John L. Provis

2020 ◽  
Vol 241 ◽  
pp. 118128 ◽  
Author(s):  
Busra Akturk ◽  
Abdullah H. Akca ◽  
Ahmet B. Kizilkanat

2017 ◽  
Vol 50 (6) ◽  
Author(s):  
Xinyuan Ke ◽  
Susan A. Bernal ◽  
Oday H. Hussein ◽  
John L. Provis

2021 ◽  
Author(s):  
Thi Nhan Nguyen ◽  
Quoc Phung ◽  
Ziyou Yu ◽  
Lander Frederickx ◽  
Diederik Jacques ◽  
...  

Abstract Carbonation of alkali activated materials is one of the main deteriorations affecting their durability. However, current understanding in structural alteration of these materials exposed to an environment inducing carbonation at nano/micro scale remains limited. This study examined the evolution of phase assemblages of alkali activated slag mortars subjected to accelerated carbonation (1% CO2, 60% relative humidity, up to 28 day carbonation) using XRD, FTIR and 29Si, 27Al, 23Na MAS NMR. Samples with three water to binder (w/b) ratios (0.35, 0.45, and 0.55) were investigated. The results show that the phase assemblages mainly consisted of C-A-S-H, disordered remnant aluminosilicate binder, and a minor hydrotalcite as a secondary product. Upon carbonation, calcium carbonate is mainly formed as the vaterite polymorph, while no sodium carbonate is found after carbonation as commonly reported. The sodium acts primarily as a charge balancing ion without producing sodium carbonate as a final carbonation product in 28-day carbonated materials. The C-A-S-H structure becomes more cross-linked due to the decalcification of this phase evidenced by the appearance of Q4 groups, which replace the Q1 and Q2 ones as observed in the 29Si MAS NMR spectra, and the dominance of Al (IV) in 27Al MAS NMR. Especially, unlike cementitious materials, the influence of w/b ratio on the crystalline phase formation and structure of C-A-S-H in the alkali activated mortars before and after carbonation is limited.


2015 ◽  
pp. 1-12 ◽  
Author(s):  
Susan A. Bernal ◽  
Rackel San Nicolas ◽  
John L. Provis ◽  
Jannie S. J. van Deventer

Author(s):  
Adeyemi Adesina ◽  
Jonathan Cercel ◽  
Sreekanta Das

This study presents the experimental investigation of the effect of curing media on the properties of mortar mixtures made with sodium carbonate activated slag-glass powder as a binder. Slag and glass powder were used at an equal percentage as the aluminosilicate precursor and the binary blend was activated with sodium carbonate. The compressive strength and ultrasonic pulse velocity of the mixtures cured in different conditions were investigated. The curing conditions used in this study are dry, moist, and submerged curing. Microstructural investigations were also carried out to understand the microstructural properties of the mixtures exposed to these curing conditions. Results from this study showed that moist curing is the most effective curing method for mortar made with sodium carbonate alkali-activated slag-glass powder as a binder. Microstructural evaluations further confirm the strength results as mortar samples cured in a moist condition exhibited a denser microstructure.


Sign in / Sign up

Export Citation Format

Share Document