The corrosion resistance and stress corrosion cracking (SCC) susceptibility of Type 347H stainless steel (SS) in supercritical water (SCW) were investigated. The general corrosion behavior was investigated by exposure test and the specimens after testing were characterized utilizing scanning electron microscopy (SEM), Auger and x-ray diffraction analysis, optical microscopy, and energy dispersive spectroscopy (EDS). The results show that with the increase of testing temperature, the corrosion rate of the materials is greatly enhanced. The corrosion process is analyzed and the formation of oxide islands on the surface of the corroded sample is attributed to the higher diffusion rate of Cr along the grain boundary. The effects of temperature and dissolved oxygen on SCC susceptibility were investigated by slow strain rate tensile test. The fractographs were characterized by SEM and the cross-section morphologies were characterized with back-scattered electron imaging, SEM, and EDS. The results indicate that, as temperature is increased, the tensile strength and strain of materials is greatly reduced, while the oxygen content in SCW has a limited effect on the mechanical properties. Intergranular cracking and ductile fracture are the main fracture modes for Type 347H SS tested in SCW, independent of temperature and oxygen content. The implications of the results to the mechanisms of SCC are discussed.
Stress corrosion cracking in 316L stainless steel bellows of a pressure safety valve