The effect of iron ions on the anatase–rutile phase transformation of titania (TiO2) in mica–titania pigments

2012 ◽  
Vol 95 (1) ◽  
pp. 96-101 ◽  
Author(s):  
Qiang Gao ◽  
Xiaomei Wu ◽  
Yueming Fan
Langmuir ◽  
2010 ◽  
Vol 26 (12) ◽  
pp. 10294-10302 ◽  
Author(s):  
Kunlun Ding ◽  
Zhenjiang Miao ◽  
Baoji Hu ◽  
Guimin An ◽  
Zhenyu Sun ◽  
...  

2012 ◽  
Vol 258 (20) ◽  
pp. 7997-8001 ◽  
Author(s):  
Xianzhong Bu ◽  
Gaoke Zhang ◽  
Chonghui Zhang

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
H. Mehranpour ◽  
M. Askari ◽  
M. Sasani Ghamsari ◽  
H. Farzalibeik

Titanium dioxide nanopowders were synthesized by the diffusion controlled sol-gel process (LaMer model) and characterized by DTA-TG, XRD, and SEM. The preparedTiO2nanoparticles have uniform size and morphology, and the phase transformation kinetics of obtained material was studied by interpretation of the X-ray diffraction patterns peaks on the base of Avrami equation. The stating point of anatase-rutile phase transformation temperature in the prepared nanoparticles was found between 100 and200°C. A decreasing trend on the intensity of X-ray peaks of anatase phase was observed up to600°Cwhen the presence of the rutile phase became predominant. Results indicated that the transition kinetics of the diffusion controlled prepared nanoparticles was begun at low temperature, and it can be concluded that the nucleation and growth sites in these particles were more than other. However, it has been found that the nucleation activation energy of rutile phase was 20 kj/mol, and it is the lowest reported activation energy.


2012 ◽  
Vol 25 (8) ◽  
pp. 1408-1415 ◽  
Author(s):  
Kairat Sabyrov ◽  
Nathan D. Burrows ◽  
R. Lee Penn

2011 ◽  
Vol 90 (2) ◽  
pp. 123-128 ◽  
Author(s):  
Berna Burcu Topuz ◽  
Güngör Gündüz ◽  
Bora Mavis ◽  
Üner Çolak

2009 ◽  
Vol 206 (7) ◽  
pp. 1520-1524 ◽  
Author(s):  
Yanting Li ◽  
Xiuguo Sun ◽  
Huiwan Li ◽  
Yu Wei

2016 ◽  
Vol 721 ◽  
pp. 177-181
Author(s):  
Inga Narkevica ◽  
Laura Stradina ◽  
Liga Stipniece ◽  
Jurijs Ozolins

TiO2 nanoparticles were electrophoretically deposited on the dense TiO2-x ceramic electrodes from suspension containing TiO2 nanoparticles, isopropanol as a solvent and triethanolamine as dispersant. The effect of deposition parameters including deposition voltage (10 to 60 V) and deposition time (10 to 40 min) on the microstructure and deposition yield was examined. It was found that the thickness of coating increased with increasing deposition time and deposition voltage. However, it affected the quality of obtained coating e.g. cracks and holes were observed. Optimizing deposition parameters homogeneous coating with smooth microstructure and limited surface damage can be obtained. Thermal treatment of the coating in the temperature range from 700 to 1100 °C causes anatase to rutile phase transformation. Crack formation was noted during sintering due to the phase transformation and thermal stresses.


Sign in / Sign up

Export Citation Format

Share Document