tin dioxide
Recently Published Documents


TOTAL DOCUMENTS

1365
(FIVE YEARS 243)

H-INDEX

62
(FIVE YEARS 11)

2022 ◽  
Vol 1049 ◽  
pp. 198-203
Author(s):  
Timur O. Zinchenko ◽  
Ekaterina A. Pecherskaya ◽  
Vladimir V. Antipenko ◽  
Artem V. Volik ◽  
Yuriy A. Varenik ◽  
...  

Transparent conducting oxides (TCOs) are widely used as a transparent electrode in various fields of opto-and semiconductor electronics. The main materials used today are indium-tin oxide, tin-antimony oxide and zinc-aluminum oxide. The authors have developed and improved the spray-pyrolysis method, which is one of the most promising methods of implementation in production. In this work, the study of tin dioxide doped with antimony coatings and the development of a methodology for the controlled synthesis of TCO, taking into account the effect of technological modes of deposition on the TCO parameters. The results of the performed studies contribute to the development of an automated technology for the synthesis of transparent conducting oxides with desired properties.


Author(s):  
Lu Yang ◽  
Ruipeng Shi ◽  
Ruoxi Zhao ◽  
Yanlin Zhu ◽  
Bin Liu ◽  
...  
Keyword(s):  

Author(s):  
Ajit Debnath ◽  
Jayanta Das ◽  
Krishna Deb ◽  
Kartick Lal Bhowmik ◽  
Biswajit Saha

To modulate carrier transport and hence thermoelectric properties a facile approach has been undertaken by incorporation of tin dioxide (SnO2) in polyaniline (PANI) and subsequent treatment with camphor sulfonic acid...


Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 293
Author(s):  
Fan Li ◽  
Peng Li ◽  
Hongyan Zhang

A high-performance zinc oxide/tin dioxide (ZnO/SnO2) humidity sensor was developed using a simple solvothermal method. The sensing mechanism of the ZnO/SnO2 humidity sensor was evaluated by analyzing its complex impedance spectra. The experimental results prove that the ZnO/SnO2 composite material has a larger specific surface area than pure SnO2, which allows the composite material surface to adsorb more water to enhance the response of the ZnO/SnO2 humidity sensor. ZnO can also contribute to the generation of oxygen-rich vacancies on the ZnO/SnO2 composite material surface, allowing it to adsorb a large amount of water and rapidly decompose water molecules into conductive ions to increase the response and recovery speed of the ZnO/SnO2 humidity sensor. These characteristics allowed the Z/S-2 humidity sensor to achieve a higher response (1,225,361%), better linearity, smaller hysteresis (6.6%), faster response and recovery speeds (35 and 8 s, respectively), and long-term stability at 11–95% relative humidity. The successful preparation of the ZnO/SnO2 composite material also provides a new direction for the design of SnO2-based resistance sensors with high humidity-sensing performance.


2021 ◽  
Vol 12 (4) ◽  
pp. 283-290
Author(s):  
O. V. Filonenko ◽  
◽  
A. G. Grebenyuk ◽  
V. V. Lobanov ◽  
◽  
...  

By the method of density functional theory with exchange-correlation functional B3LYP and basis set 3‑21G (d), the structural and energy characteristics have been considered of the molecular models of SnO2 nanoclusters of different size and composition with the number of Sn atoms from 1 to 10. Incompletely coordinated surface tin atoms were terminated by hydroxyl groups. It has been shown that the Sn–O bond length in nanoclusters does not depend on the cluster size and on the coordination number of Sn atoms, but is determined by the coordination type of neighboring oxygen atoms. Namely, the bond length Sn–O(3) (@ 2.10 Å) is greater than that of Sn–O (2) (@ 1.98 Å). The calculated values of Sn–O (3) bond lengths agree well with the experimental ones for crystalline SnO 2 samples (2.05 Å). The theoretically calculated width of the energy gap decreases naturally with increasing cluster size (from 6.14 to 3.46 eV) and approaches the experimental value of the band gap of the SnO 2 crystal (3.6 eV). The principle of additivity was used to analyze the energy characteristics of the considered models and to estimate the corresponding values for a cassiterite crystal. According to this principle, a molecular model can be represented as a set of atoms or atomic groups of several types that differ in the coordination environment and, therefore, make different contributions to the total energy of the system. The calculated value of the atomization energy for SnO2 is 1661 kJ/mol and corresponds satisfactorily to the experimentally measured specific atomization energy of crystalline SnO2 (1381 kJ/mol). It has been shown that a satisfactory reproduction of the experimental characteristics of crystalline tin dioxide is possible when using clusters containing at least 10 state atoms, for example, (SnO2)10×14H2O.


Surface ◽  
2021 ◽  
Vol 13(28) ◽  
pp. 3-14
Author(s):  
A.G. Grebenyuk ◽  

Oxides of tetravalent elements are well known to have a lot of crystalline modifications. For example, most of silica polymorphs are characterized by tetrahedral coordination environment of silicon atoms. On the contrary, crystals of stishovite and of some silicate minerals have their silicon atoms in octahedral coordination spheres. It has been found experimentally that the phase transitions between silica polymorphs accompanied by a rearrangement of silica-oxygen tetrahedrons into octahedra require an energy income (preference energy) of 54 kJ/mol. When increasing the atomic mass of the oxide forming element, the former decreases extremely and for tin dioxide is equal to -59 kJ/mol. These values can be reproduced in a theoretical way, within the frameworks of modern quantum chemical methods and periodic models. High disperse silica nanoparticles (as well as those for other oxides) have only the nearest order of atomic stationing, so that theoretical approaches developed for crystals cannot be applied to small particles. These particles can be transformed into stishovite form under hydrothermal conditions. Such a process can be simulated within cluster approximation by use of molecular models. This work is devoted to quantum chemical simulation of formation of the fragments with hexa-coordinated atoms of silicon and of its analogs in the structure of oxane dendrimers. A row of high symmetry models was examined containing two, three, five, and seventeen atoms of silicon and of germanium, titanium and tin, terminated with hydroxyl groups. These structures can be rearranged into another ones including oxide forming atoms with elevated (equal to 5 or 6) coordination number, so mimicking the rutile-like structure. Such models let it possible to fulfill the procedure of transformation without rupturing siloxane bonds, so remaining within a deformation approach. Another advantage is the exclusion of the basis set superposition error due to use of molecular models of the same total formula for all the coordination states. All calculations were carried out by Hartree-Fock and density functional theory methods with the all-electron (3-21G*) and valent (SBKJC) basis sets by means of the GAMESS program. Models of various size have been examined, in particular, disiloxane (HO)3Si-O-Si(OH)3 witch can be transformed into a self-coordinated form where one of silicon atoms becomes a five-coordinated; trisiloxane (HO)3Si-O-Si(OH)2-O-Si(OH)3 can be rearranged into symmetric isomer with one hexa-coordinated silicon atom. Pentasiloxane with neo-structure of [(HO)3Si-O]4Si forms three coordination structures, the most stable of them mimicking the stishovite crystal; it contains one 6-coordinated and two 5-coordinated silicon atoms. Siloxane containing 17 silicon atoms has a super-neo-structure of {[(HO)3Si-O]3Si-O}4Si; it includes seven six-coordinated and four five-coordinated silicon atoms. Relative models for silicon analogs have been also examined. When analyzing a dependence of the energy differences between open and coordinated oxane structures on the number of atoms of the oxide forming element in the cluster, one can jump to the conclusion that the specific value of this characteristic monotonously decreases with the increase in the number of atoms of the molecular model, so becoming close to the experimental data.


2021 ◽  
pp. 5-11
Author(s):  
A. Chebanenko ◽  
L. Filevska ◽  
V. Grinevych ◽  
V. Smyntyna ◽  
O. Negrutsa

In the presented paper the effect of ammonia vapors on the electrical properties of nanosized tin dioxide films obtained using polymers was investigated to assess the possibility of their use as an ammonia sensor’s sensitive element at room temperature. Ammonia vapor leads to a decrease in the conductivity of the studied SnO2 films. This is due to the fact that the adsorbed ammonia molecules increase the height of the intergranular potential barriers, and the surface shut-off bend of the energy bands. The main role in this is played by the processes of physical adsorption of ammonia molecules. The sensitivity of the films to ammonia vapor is in the range of 0.35-0.63 and reaches a maximum at a voltage of 300 V. The processes of adsorption and desorption take place in two stages and are reversible, as evidenced by the calculated time constants of adsorption and desorption.


Author(s):  
Дмитрий Александрович Тимошенко ◽  
Илья Владимирович Синёв ◽  
Вячеслав Владимирович Симаков ◽  
Никита Александрович Клычков

Нитевидные нанокристаллы диоксида олова были выращены методом физического осаждения из паровой фазы и перенесены на контактную систему методом замороженной капли. Полученные сенсоры обладают газочувствительностью, воздействие паров газов-восстановителей приводит к увеличению их проводимости. Показано, что существует долговременный дрейф проводимости сенсора при воздействии пробы. Исследована концентрационная зависимость чувствительности сенсора к парам этанола, ацетона и пропанол-2 при температуре 300 °С. На основе анализа концентрационных зависимостей проводимости рассчитаны энергии десорбции частиц, а также положения донорных уровней, индуцированных при адсорбции газов-восстановителей, относительно акцепторного уровня кислорода. Показано, что рассчитанные параметры имеют существенно меньший по сравнению с проводимостью временной дрейф. Использование указанных параметров позволяет распознавать газовоздушные смеси, т.е. однозначно отнести одну из трех исследованных проб к её классу. Tin dioxide nanowhiskers were grown by physical vapor deposition and transferred to the contact system by the frozen drop method. The sensors demonstrate gas-sensitivity. Exposing sensors to the atmosphere contained vapors of reducing-gases leads to an increasing of their conductivity. A long-term drift of the sensor conductivity during reducing-gas exposition was shown. A sensitivity response vs concentration for ethanol, acetone, and propanol-2 vapors at temperature 300 °C was investigated. Desorption energies of the particles and the positions of the donor levels induced by adsorption of reducing gases particles were calculated by analysis of the conductivity vs concentration dependence. The calculated parameters had a significantly smaller time drift in comparison with the conductivity. Using of these parameters makes possible to recognize gas-air mixtures: classify the each of three studied samples to one of classes.


Author(s):  
Никита Александрович Клычков ◽  
Вячеслав Владимирович Симаков ◽  
Илья Владимирович Синёв ◽  
Дмитрий Александрович Тимошенко

Исследовано влияние паров органических веществ (изопропанола, этанола и ацетона) различной концентрации на отклик сенсоров газа на основе наноструктурированных пленок диоксида олова, синтезированных золь-гель методом. Экспериментально установлено, что напуск газовых проб, содержащих пары органических веществ, приводит к увеличению проводимости наноструктурированных пленок диоксида олова. В области высоких концентраций (более 50% от насыщенного пара) концентрационная зависимость проводимости имеет тенденцию к насыщению. Показана возможность распознавания сорта примесного газа с помощью статистической обработки отклика только одного сенсора при различных концентрациях анализируемой пробы. Определено положение поверхностного донорного уровня примесного газа относительно акцепторного уровня кислорода и теплота десорбции частиц исследуемых газов. Предложен новый метод мультипараметрического распознавания газовых смесей, основанный на использование в качестве признаков классификации физико-химических параметров анализируемых газов, не зависящих от их концентрации. Установлено, что предложенный метод мультипараметрического распознавания газовых смесей имеет более высокую надежность по сравнению со стандартными методами, основанными на анализе отклика сенсоров газа. The influence of organic vapors (isopropanol, ethanol, and acetone) with different concentrations in air on a response gas sensor based on nanostructured tin dioxide films synthesized by the sol-gel method was studied. It was found experimentally that inject of the gas mixtures containing organic vapors into measure chamber results to an increase of the conductivity of nanostructured tin dioxide films. In the area of high concentrations (more than 50% of saturated vapor), the concentration dependence of conductivity trends to saturation. The recognizing possibility of species gas admixture by using statistical processing of response only single sensor at different analyzed gas mixture concentrations is validated. The surface donor level of gas-reducing relative to acceptor level oxygen and desorption heat of gas particle were determined. A new method based multiparametric recognition gas mixtures is proposed based on using concentration-independent physical and chemical parameters of analyzed gases as classification properties. It is shown that proposed multiparametric recognition method has higher reliability in comparison with standard methods based on the analysis gas sensor response.


Sign in / Sign up

Export Citation Format

Share Document