Continuing upscaling trends in turbine height, rotor diameter, and rated power have resulted in massive, expensive tower structures. A modified guyed tower concept with struts (GTS) is proposed for saving material, and the basic design is made for a 2.5MW turbine. The tower and cable dimensions are optimized for lowest system cost given yield constraints. DACE (design and analysis of computer experiments) methods of sampling and surrogate model optimization are used for efficient parameter study and optimization of the ABAQUS finite element model using DAKOTA software. The resulting design is highly effective in transferring turbine loads from the tower to the cables. A mass savings of 41% is calculated vs. conventional structures, and further investigation of the GTS is recommended for both onshore and offshore applications. Additionally, the concept of retowering older turbines is introduced and proposed as an economic alternative to the common practice of repowering old wind farms with larger, new machines. The GTS is specifically suited to this application. Lastly, the design methodology developed for this study is shown to be effective and efficient; it can be applied for the massoptimization of similar cablesupported truss structures.
Sowing the Seeds for a Bountiful Harvest: Shaping the Rules and Creating the Tools for Wisconsin's Next Generation of Wind Farms