Experimental study on the supercritical startup and heat transport capability of a neon-charged cryogenic loop heat pipe

2017 ◽  
Vol 134 ◽  
pp. 178-187 ◽  
Author(s):  
Yuandong Guo ◽  
Guiping Lin ◽  
Jiang He ◽  
Lizhan Bai ◽  
Hongxing Zhang ◽  
...  
Keyword(s):  
Experimental Study ◽  
Heat Pipe ◽  
Heat Transport ◽  
Loop Heat Pipe ◽  
Heat Transport Capability

Improvement of Heat Transfer Performance of Loop Heat Pipe for Electronic Devices

2011 ◽  
Author(s):  
Tomonao Takamatsu ◽  
Katsumi Hisano ◽  
Hideo Iwasaki
Keyword(s):  
Heat Pipe ◽  
Heat Transport ◽  
Thermal Energy ◽  
Heat Load ◽  
Cooling System ◽  
Electronic Devices ◽  
Working Fluid ◽  
Loop Heat Pipe ◽  
Reserve Area ◽  
Heat Transport Capability

In this paper is presented the results on performance of the cooling model using Loop Heat Pipe (LHP) system. In recent years, ever-ending demand of high performance CPU led to a rapid increase in the amount of heat dissipation. Consequently, thermal designing of electronic devices need to consider some suitable approach to achieve high cooling performance in limited space. Heat Pipe concept is expected to serve as an effective cooling system for laptop PC, however, it suffered from some problems as follows. The heat transport capability of conventional Heat Pipe decreases with the reduction in its diameter or increase in its length. Therefore, in order to use it as cooling system for future electronic devices, the above-mentioned limitations need to be removed. Because of the operating principle, the LHP system is capable of transferring larger amount of heat than conventional heat pipes. However, most of the LHP systems suffered from some problems like the necessity of installing check valves and reservoirs to avoid occurrence of counter flow. Therefore, we developed a simple LHP system to install it on electronic devices. Under the present experimental condition (the working fluid was water), by keeping the inside diameter of liquid and vapor line equal to 2mm, and the distance between evaporator and condenser equal to 200mm, it was possible to transport more than 85W of thermal energy. The thickness of evaporator was about 5mm although it included a structure to serve the purpose of controlling vapor flow direction inside it. Successful operation of this system at inclined position and its restart capability are confirmed experimentally. In order to make the internal water location visible, the present LHP system is reconstructed using transparent material. In addition, to estimate the limit of heat transport capability of the present LHP system using this thin evaporator, the air cooling system is replaced by liquid cooling one for condensing device. Then this transparent LHP system could transport more than 100W of thermal energy. However, the growth of bubbles in the reserve area with the increase in heat load observed experimentally led to an understanding that in order to achieve stable operation of the LHP system under high heat load condition, it is very much essential to keep enough water in the reserve area and avoid blocking the inlet with bubbles formation.

scholarly journals Development of a loop heat pipe with kW-class heat transport capability

2021 ◽  
Vol 183 ◽  
pp. 116169
Author(s):  
Yoshitada Aono ◽  
Noriyuki Watanabe ◽  
Ai Ueno ◽  
Hosei Nagano
Keyword(s):  
Heat Pipe ◽  
Heat Transport ◽  
Loop Heat Pipe ◽  
Heat Transport Capability

An Experimental Study of Heat Transfer Characteristics in Miniature Loop Heat Pipes With Rectangular Shaped Evaporator

2011 ◽  
Author(s):  
Z. R. Lin ◽  
Z. Y. Lee ◽  
L. W. Zhang ◽  
S. F. Wang ◽  
A. A. Merrikh ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Heat Transport ◽  
Heat Sink ◽  
Thermal Design ◽  
Working Fluid ◽  
Loop Heat Pipe ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Heat Transport Capability

Loop heat pipe (LHP) is a highly efficient cooling device. It has gained great attention in the electronics cooling industry due to its superior heat transport capability — that is, its ability to carry heat over long distances. For this article, a miniature flat loop heat pipe (MFLHP) with rectangular-shaped evaporator was developed. The LHP’s evaporator was combined with the compensation chamber. MFLHPs with different diameters and lengths for the connecting pipeline were selected for a series of experimental studies on their heat transfer characteristics. In these experiments, pure water was used as the working fluid. The studies showed that the heat transport capability of a MFLHP with 4 mm diameter was better than that a MFLHP with 3 mm diameter. At a low thermal resistance of 0.04°C /W (at 200W), an optimal length for the connecting pipeline for a particular MFLHP with 4 mm diameter was identified. Finally, a heat sink attached to a MFLHP was developed for cooling a graphics processing unit (GPU), the thermal design power (TDP) of which was 200 W. The results showed the GPU heat sink with MFLHP had good performance and satisfied GPU cooling requirements. Compared to the conventional heat pipe solutions, only one MFLHP was able to cope with high power dissipation, offering the potential to make a lighter heat sink.

Performance Testing of Loop Heat Pipe in a 1kW Heat Transport/Rejection System

2012 ◽  
Author(s):  
Sheleen Spencer ◽  
Ronald Sutton ◽  
Robert Baldauff ◽  
Triem Hoang
Keyword(s):  
Heat Pipe ◽  
Heat Transport ◽  
Performance Testing ◽  
Loop Heat Pipe

Experimental study of heat transfer and start-up of loop heat pipe with multiscale porous wicks

2017 ◽  
Vol 117 ◽  
pp. 782-798 ◽  
Author(s):  
Xianbing Ji ◽  
Ye Wang ◽  
Jinliang Xu ◽  
Yanping Huang
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Heat Pipe ◽  
Loop Heat Pipe ◽  
Start Up

Experimental Investigation of Ultrasonic Frequency Effect on an Oscillating Heat Pipe

2016 ◽  
Author(s):  
Nannan Zhao ◽  
Benwei Fu ◽  
Hongbin Ma ◽  
Fengmin Su
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Heat Transport ◽  
Frequency Effect ◽  
Ultrasonic Frequency ◽  
Sound Effect ◽  
Oscillating Heat Pipe ◽  
Ultrasonic Sound ◽  
Heat Transfer Capacity ◽  
Heat Transport Capability

The heat transport capability in an oscillating heat pipe (OHP) significantly depends on the oscillating frequency. An external frequency directly affects the natural frequency in the system. In this investigation, the ultrasound sound effect on the heat transport capability in an OHP was conducted with focus on the ultrasonic frequency effect on the oscillating motion and heat transfer capacity in an OHP. The ultrasonic sound was applied to the evaporating section of the OHP by using the electrically-controlled piezoelectric ceramics. The heat pipe was tested with or without the ultrasonic sound with different frequencies. In addition, the effects of operating temperature, heat load from 25 W to 150 W were investigated. The experimental results demonstrate that the heat transfer capacity enhancement of the OHP depends on the frequency of the ultrasound field, and there exists an optimum combination of the frequencies which will lead to the largest enhancement of the heat transfer capacity of the OHP.

Study on a Pulsating Heat Pipe With Self-Rewetting Fluid

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
Koji Fumoto ◽  
Masahiro Kawaji ◽  
Tsuyoshi Kawanami
Keyword(s):  
Surface Tension ◽  
Heat Pipe ◽  
Heat Transport ◽  
Heated Surface ◽  
Input Power ◽  
Water Mixture ◽  
Pulsating Heat Pipe ◽  
Maximum Heat ◽  
Dry Spot ◽  
Heat Transport Capability

This paper discusses a pulsating heat pipe (PHP) using a self-rewetting fluid. Unlike other common liquids, self-rewetting fluids have the property that the surface tension increases with temperature. The increasing surface tension at a higher temperature can cause the liquid to be drawn toward a heated surface if a dry spot appears and thus to improve boiling heat transfer. In experiments, 1-butanol and 1-pentanol were added to water at a concentration of less than 1 wt % to make self-rewetting fluid. A pulsating heat pipe made from an extruded multiport tube was partially filled with the self-rewetting fluid water mixture and tested for its heat transport capability at different input power levels. The experiments showed that the maximum heat transport capability was enhanced by a factor of 4 when the maximum heater temperature was limited to 110°C. Thus, the use of a self-rewetting fluid in a PHP was shown to be highly effective in improving the heat transport capability of pulsating heat pipes.

Sign in / Sign up

Export Citation Format

Share Document