Biomass direct gasification for electricity generation and natural gas replacement in the lime kilns of the pulp and paper industry: A techno-economic analysis

Recent advances made in the reuse of pulp and paper industry sludges in hardboard production are explained. Data obtained from pilot and full-scale plants using primary sludge of a pulp and paper industry as an additive in the production of hardboard is presented. An economic analysis of the reuse of pulp and paper primary sludge in hardboard manufacturing is given. The quality of the hardboard produced is tested and compared with the qualities of the hardboard produced by the same plant before the addition of primary sludge. The hardboard with primary sludge additive has been used in Turkey for about a year in the manufacturing of office and home furniture. The results are very satisfactory when the primary sludge is used at 1/4 ratio.

Download Full-text

Integration of dual fluidized bed steam gasification into the pulp and paper industry

Biomass Conversion and Biorefinery ◽

10.1007/s13399-021-02160-y ◽

2021 ◽

Author(s):

Matthias Kuba ◽

Florian Benedikt ◽

Katharina Fürsatz ◽

Josef Fuchs ◽

Martin Demuth ◽

...

Keyword(s):

Natural Gas ◽

Separation Efficiency ◽

Paper Industry ◽

Pulp And Paper Industry ◽

Pulp And Paper ◽

Steam Gasification ◽

Chemical Recovery ◽

Recovery Cycle ◽

Product Gas ◽

Gas Burner

AbstractThe pulp and paper industry represents an industry sector which is characterised by its already high degree of sustainability. Biomass is a renewable input material, and typically highly developed recovery cycles minimise the loss of chemicals used in the pulping process. However, certain parts of the recovery cycle are still operated on fossil fuels. This study deals with the substitution of the fossil-based gaseous fuel with product gas from biomass gasification.Gasification experiments have shown that bark available at pulp and paper mills is suitable to produce a product gas via dual fluidised bed steam gasification as a promising substitute for natural gas. Based on the comparison of process layouts regarding the separation of non-process elements, separation efficiency is derived for different setups. To ensure operational security of the chemical recovery cycle, comprehensive gas cleaning including heat exchangers, a particle filter, and a liquid scrubber unit is advised. The gas flow of fuel gas into the gas burner is increased as the heating value of the product gas is accordingly lower in comparison to natural gas. Furthermore, adaptions of the gas burner might be necessary to address the earlier ignition of the H2-rich product gas compared to natural gas.

Download Full-text

Co-cooking nonwoods with hardwoods

TAPPI Journal ◽

10.32964/tj13.6.19 ◽

2014 ◽

Vol 13 (6) ◽

pp. 19-24

Author(s):

TROY RUNGE ◽

CHUNHUI ZHANG

Keyword(s):

High Performance Liquid Chromatography ◽

High Performance ◽

Paper Industry ◽

Pulp And Paper Industry ◽

Strength Properties ◽

Agricultural Residues ◽

Kraft Pulping ◽

Pulp And Paper ◽

Strength Increase ◽

Xylan Content

Agricultural residues and energy crops are promising resources that can be utilized in the pulp and paper industry. This study examines the potential of co-cooking nonwood materials with hardwoods as means to incorporate nonwood material into a paper furnish. Specifically, miscanthus, switchgrass, and corn stover were substituted for poplar hardwood chips in the amounts of 10 wt %, 20 wt %, and 30 wt %, and the blends were subjected to kraft pulping experiments. The pulps were then bleached with an OD(EP)D sequence and then refined and formed into handsheets to characterize their physical properties. Surprisingly, all three co-cooked pulps showed improved strength properties (up to 35%). Sugar measurement of the pulps by high-performance liquid chromatography suggested that the strength increase correlated with enriched xylan content.

Download Full-text