Predicting daily COVID-19 case rates from SARS-CoV-2 RNA concentrations across a diversity of wastewater catchments

We assessed the relationship between municipality COVID-19 case rates and SARS-CoV-2 concentrations in the primary sludge of corresponding wastewater treatment facilities. Over 1,700 daily primary sludge samples were collected from six wastewater treatment facilities with catchments serving 18 cities and towns in the State of Connecticut, USA. Samples were analyzed for SARS-CoV-2 RNA concentrations during a 10 month time period that overlapped with October 2020 and winter/spring 2021 COVID-19 outbreaks in each municipality. We fit lagged regression models to estimate reported case rates in the six municipalities from SARS-CoV-2 RNA concentrations collected daily from corresponding wastewater treatment facilities. Results demonstrate the ability of SARS-CoV-2 RNA concentrations in primary sludge to estimate COVID-19 reported case rates across treatment facilities and wastewater catchments, with coverage probabilities ranging from 0.94 to 0.96. Lags of 0 to 1 days resulted in the greatest predictive power for the model. Leave-one-out cross validation suggests that the model can be broadly applied to wastewater catchments that range in more than one order of magnitude in population served. The close relationship between case rates and SARS-CoV-2 concentrations demonstrates the utility of using primary sludge samples for monitoring COVID-19 outbreak dynamics. Estimating case rates from wastewater data can be useful in locations with limited testing availability, testing disparities, or delays in individual COVID-19 testing programs.

Anaerobic Digestion for Biogas Production from Municipal Sewage Sludge: A Comparative Study between Fine Mesh Sieved Primary Sludge and Sedimented Primary Sludge

Two different types of primary sewage sludge have been used as feedstock for production of biogas through anaerobic digestion (AD): the one type was sludge from a typical primary clarifier (PC), while the other type of sludge produced by a rotating belt filter, commonly called microsieve (MS). Initially the main physicochemical characteristics of the sludges, such as total solids (TS), volatile solids (VS), VS/TS, pH and carbon to nitrogen ratio (C/N) were determined, for MS: 37.86 ± 0.08%, 83.00 ± 0.41%, 0.83 ± 0.00, 6.67 ± 0.08 and 19.68 ± 0.69, respectively, and for PC: 2.61 ± 0.08%, 78.77 ± 1.91%, 0.79 ± 0.02, 6.61 ± 0.10 and 14.46 ± 1.23, respectively. Then, calculated amounts of the sludges were inserted into airtight vials and were inoculated using anaerobic sludge. The daily biogas production was measured over a period of 30 days. PC sludge maximized the daily biogas production (44.20 mlbiogas/gvsd) 11 days after inoculation, while the MS sludge reach a peak (37.74 mlbiogas/gvsd) 14 days after inoculation. The cumulative biogas production over the 30 days of AD was in the same laver (442.29 mlbiogas/gvs for PC versus 434.73 mlbiogas/gvs for MS). However, PC sludge indicated higher daily biogas production, compared to MS sludge, while the opposite was observed for the period following the peak point. The Volatile Solids Reduction for PC and MS sludges was recorded as 46.06% and 32.39%, respectively.

The Effect of pH And Hydraulic Retention Time On Production Of Volatile Fatty Acids From Primary Sludge Anaerobic Fermentation

Primary Sludge (PS) from wastewater treatment plants contains high biodegradable organic matter and therefore can be used to produce Volatile Fatty Acids (VFAs). The produced VFAs can be utilized in biological nitrogen and phosphorus removal processes as an external carbon source. The objective of this research was to investigate the effect of pH and hydraulic retention time (HRT) on the production of VFAs from PS through the anaerobic fermentation process. The experiments were conducted in both batch and semi-continuous flow regimes using bench scale fermenters under the mesophilic temperature. The Design of experiments included the HRT of 1 – 3 days and pH range of 4.5 - 11.0 for batch and 4.5 - 6.5 for semi-continuous modes. According to the obtained results, the VFAs production increased with an increase in HRT from 1 to 3 days. For the batch study, the pH range for maximum VFAs yield was pH 6.5 –10.0 achieved at HRT of 3 days. For the semi-continuous study, the maximum amount of VFAs production was observed at a pH of 6.5 and HRT of 3 days.