Seismic performance quantification of buckling-restrained braced RC frame structures under near-fault ground motions

2020 ◽  
Vol 211 ◽  
pp. 110447 ◽  
Author(s):  
Ke Du ◽  
Feng Cheng ◽  
Jiulin Bai ◽  
Shuangshuang Jin
Keyword(s):  
Seismic Performance ◽  
Ground Motions ◽  
Frame Structures ◽  
Rc Frame ◽  
Near Fault ◽  
Rc Frame Structures

Seismic Performance Assessment of RC Frame Structures Subjected to Far-Field and Near-Field Ground Motions Considering Strain Rate Effect

2018 ◽  
Vol 18 (10) ◽  
pp. 1850127 ◽  
Author(s):  
Rou-Han Li ◽  
Hong-Nan Li ◽  
Chao Li
Keyword(s):  
Strain Rate ◽  
Seismic Performance ◽  
Ground Motions ◽  
Near Field ◽  
Strain Rate Effect ◽  
Rate Effect ◽  
Frame Structures ◽  
Far Field ◽  
Rc Frame ◽  
Rc Frame Structures

This paper investigates the influence of strain rate effect on the seismic performance of Reinforced concrete (RC) frame structures subjected to far-field and near-field ground motions. An approach for the nonlinear dynamic analysis of RC frame structures considering the strain-rate sensitivity of concrete and reinforcing steel materials is proposed and its effectiveness is validated by the experimental data of RC columns under dynamic loadings. A non-dimensional index is put forward to reveal the regularities of strain rate under different types of ground motions with various intensity levels. The influences of strain rate effect and input ground motion on the seismic performance of the exemplar RC frame are studied by comparing the seismic responses and fragilities of rate-dependent structural models with those of rate-independent ones. Numerical results indicate that the strain rates in structural members increase with the ground motion intensity and the strain rates induced by the near-field pulse-like earthquakes are higher than those by the far-field and near-field non-pulse-like earthquakes. The global response, critical member response, local damage and seismic fragility are all influenced by the strain rate effect, especially under the near-field pulse-like ground motions. Neglecting the influences of strain rate effect, variations in strain rates of different structural members and inputs of pulse-like ground motions may lead to erroneous seismic performance assessments of RC frame structures.

Selection of the Most Unfavorable Real Ground Motions for Low- and Mid-rise RC Frame Structures

2013 ◽  
Vol 17 (8) ◽  
pp. 1233-1251 ◽  
Author(s):  
Changhai Zhai ◽  
Zhiwang Chang ◽  
Shuang Li ◽  
Lili Xie
Keyword(s):  
Ground Motions ◽  
Frame Structures ◽  
Rc Frame ◽  
Rc Frame Structures ◽  
Selection Of

INFLUENCE OF ADDED VISCOUS DAMPERS ON THE PROBABILISTIC SEISMIC PERFORMANCE EVALUATION OF RC FRAMES

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
Luca Landi ◽  
Cristina Vorabbi ◽  
Pier Paolo Diotallevi
Keyword(s):  
Nonlinear Dynamic ◽  
Ground Motions ◽  
Frame Structures ◽  
Rc Frame ◽  
Viscous Dampers ◽  
Fluid Viscous Dampers ◽  
Hazard Curve ◽  
Dynamic Analyses ◽  
Nonlinear Dynamic Analyses ◽  
Rc Frame Structures

This paper deals with the parameters which influence the probability of reaching the near collapse limit state of RC frame structures equipped with nonlinear fluid viscous dampers. The study can be divided into two steps. The first aims to assess how the median and the dispersion of seismic demand can vary in the RC frame structures with and without dampers, considering a wide set of ground motions. The second step evaluates the expression in closed form, given by 2000 SAC/FEMA method, to assess the annual probability of failure of RC structures. This probability has been estimated considering a wide set of ground motions and different methods to approximate the hazard curve. The evaluations have been made on the basis of the results of a large number of nonlinear dynamic analyses; in particular, 180 nonlinear dynamic analyses have been made for the case studies with and without dampers. In conclusion, it has been noticed that the probabilistic assessment depends on the number of records considered and that the simplified formula provided by the 2000 SAC-FEMA method is strongly sensitive to the variation of the hazard curve and the dispersion.

Probabilistic Evaluation of Effects of Column Moment Magnification Factor on Seismic Performance of Reinforced Concrete Frames

2011 ◽  
Vol 243-249 ◽  
pp. 251-257 ◽  
Author(s):  
Ming Ji He ◽  
Chun Yang ◽  
Jian Cai ◽  
Yan Sheng Huang ◽  
Yi Wu
Keyword(s):  
Reinforced Concrete ◽  
Failure Mode ◽  
Seismic Performance ◽  
Seismic Vulnerability ◽  
Failure Modes ◽  
Fragility Curves ◽  
Frame Structures ◽  
Rc Frame ◽  
Magnification Factor ◽  
Rc Frame Structures

Enhancing column flexural capacity is the key measure in seismic capacity design to achieve strong column-weak beam failure mode and determinate the probabilistic relation between column moment magnification factor (CMMF). In the paper the effects of column moment magnification factor on seismic performance of reinforced concrete (RC) frames are evaluated to limit the occurrence probability of column-hinging failure modes within an acceptable tolerance. Monte Carlo simulation methodology is used to calculate the probability of drift demand exceeding drift capacity of two typical frame structures with consideration of major uncertainties. And fragility curves are constructed to obtain the relationship between CMMF and probability of structural damages and assess the seismic vulnerability of RC frame structures. Results show that the seismic performance of RC frame structures can be significantly enhanced by improving CMMF. The CMMF is required to be equal to or greater than 2.0 to achieve acceptable probability of exceedance of column-hinging failure mode.

scholarly journals Seismic Performance Assessments of RC Frame Structures Strengthened by External Precast Wall Panel

2020 ◽  
Vol 10 (5) ◽  
pp. 1749
Author(s):  
Seung-Ho Choi ◽  
Jin-Ha Hwang ◽  
Sun-Jin Han ◽  
Hyo-Eun Joo ◽  
Hyun-Do Yun ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Precast Concrete ◽  
Frame Structure ◽  
Frame Structures ◽  
Rc Frame ◽  
Analysis Model ◽  
Energy Dissipation Capacity ◽  
Precast Walls ◽  
Rc Frame Structures

In recent years, a variety of strengthening methods have been developed to improve the seismic performance of reinforced concrete (RC) frame structures with non-seismic details. In this regard, this study proposes a new type of seismic strengthening method that compresses prefabricated precast concrete (PC) walls from the outside of a building. In order to verify the proposed method, a RC frame structure strengthened with precast walls was fabricated, and cyclic loading tests were performed. The results showed that specimens strengthened using the proposed method exhibited further improvements in strength, stiffness and energy dissipation capacity, compared to RC frame structures with non-seismic details. In addition, a nonlinear analysis method, capable of considering the flexural compression and shear behaviors of the walls, was suggested to analytically evaluate the structural behavior of the frame structures strengthened by the proposed method. Using this, an analysis model for frame structures strengthened with precast walls was proposed. Through the proposed model, the analysis and test results were compared in relation to stiffness, strength, and energy dissipation capacity. Then, the failure mode of the column was evaluated based on the pushover analysis. In addition, this study proposed a simplified analysis model that considered the placement of longitudinal reinforcements in shear walls.

Effects of early-arriving pulse-like ground motions on seismic demands in RC frame structures

2020 ◽  
Vol 130 ◽  
pp. 105997 ◽  
Author(s):  
Cuihua Li ◽  
Sashi Kunnath ◽  
Zhanxuan Zuo ◽  
Weibing Peng ◽  
Changhai Zhai
Keyword(s):  
Ground Motions ◽  
Frame Structures ◽  
Rc Frame ◽  
Seismic Demands ◽  
Rc Frame Structures

Self-centering cable brace with friction devices for enhancing seismic performance of RC frame structures

2020 ◽  
Vol 207 ◽  
pp. 110187 ◽  
Author(s):  
Tong Guo ◽  
Jishuai Wang ◽  
Yongsheng Song ◽  
Weihong Xuan ◽  
Yuzhi Chen
Keyword(s):  
Seismic Performance ◽  
Frame Structures ◽  
Rc Frame ◽  
Rc Frame Structures

Seismic performance of RC-frame structures with GFRP infill panels

2017 ◽  
Vol 160 ◽  
pp. 722-733 ◽  
Author(s):  
Minho Kwon ◽  
Hyunsu Seo ◽  
Jinsup Kim
Keyword(s):  
Seismic Performance ◽  
Frame Structures ◽  
Rc Frame ◽  
Infill Panels ◽  
Rc Frame Structures
Sign in / Sign up

Export Citation Format

Share Document