scholarly journals Seismic Performance Assessments of RC Frame Structures Strengthened by External Precast Wall Panel

2020 ◽  
Vol 10 (5) ◽  
pp. 1749
Author(s):  
Seung-Ho Choi ◽  
Jin-Ha Hwang ◽  
Sun-Jin Han ◽  
Hyo-Eun Joo ◽  
Hyun-Do Yun ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Precast Concrete ◽  
Frame Structure ◽  
Frame Structures ◽  
Rc Frame ◽  
Analysis Model ◽  
Energy Dissipation Capacity ◽  
Precast Walls ◽  
Rc Frame Structures

In recent years, a variety of strengthening methods have been developed to improve the seismic performance of reinforced concrete (RC) frame structures with non-seismic details. In this regard, this study proposes a new type of seismic strengthening method that compresses prefabricated precast concrete (PC) walls from the outside of a building. In order to verify the proposed method, a RC frame structure strengthened with precast walls was fabricated, and cyclic loading tests were performed. The results showed that specimens strengthened using the proposed method exhibited further improvements in strength, stiffness and energy dissipation capacity, compared to RC frame structures with non-seismic details. In addition, a nonlinear analysis method, capable of considering the flexural compression and shear behaviors of the walls, was suggested to analytically evaluate the structural behavior of the frame structures strengthened by the proposed method. Using this, an analysis model for frame structures strengthened with precast walls was proposed. Through the proposed model, the analysis and test results were compared in relation to stiffness, strength, and energy dissipation capacity. Then, the failure mode of the column was evaluated based on the pushover analysis. In addition, this study proposed a simplified analysis model that considered the placement of longitudinal reinforcements in shear walls.

Experimental investigation of seismic performance of a novel isostatic frame-cladding system

2022 ◽  
pp. 136943322110572
Author(s):  
Xun Chong ◽  
Pu Huo ◽  
Linlin Xie ◽  
Qing Jiang ◽  
Linbing Hou ◽  
...  
Keyword(s):  
Seismic Performance ◽  
Damage Evolution ◽  
Failure Modes ◽  
Static Load ◽  
Precast Concrete ◽  
Frame Structure ◽  
Deformation Capacity ◽  
Load Bearing Capacity ◽  
Cladding Panels ◽  
Energy Dissipation Capacity

A new connection measure between the precast concrete (PC) cladding panel and PC frame structure is proposed to realize a new kind of isostatic frame-cladding system. Three full-scale PC wall-frame substructures were tested under the quasi-static load. These substructures included a bare wall-frame specimen, a specimen with a cladding panel that has no opening, and a specimen with a cladding panel that has an opening in it. The damage evolution, failure mode, load-bearing capacity, deformation capacity, and energy dissipation capacity of three specimens were compared. The results indicated that the motions of the cladding panels and the main structures were uncoupled through the relative clearance of the bottom connections, and three specimens exhibited approximately identical failure modes and seismic performance. Thus, the reliability of this new isostatic system was validated.

scholarly journals Experimental Study of a New Precast Prestressed Concrete Joint

2018 ◽  
Vol 8 (10) ◽  
pp. 1871 ◽  
Author(s):  
Xueyuan Yan ◽  
Suguo Wang ◽  
Canling Huang ◽  
Ai Qi ◽  
Chao Hong
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Prestressed Concrete ◽  
Precast Concrete ◽  
Concrete Strength ◽  
Frame Structure ◽  
Loading Test ◽  
Concrete Frame ◽  
Concrete Joints ◽  
Precast Prestressed Concrete

Precast monolithic structures are increasingly applied in construction. Such a structure has a performance somewhere between that of a pure precast structure and that of a cast-in-place structure. A precast concrete frame structure is one of the most common prefabricated structural systems. The post-pouring joint is important for controlling the seismic performance of the entire precast monolithic frame structure. This paper investigated the joints of a precast prestressed concrete frame structure. A reversed cyclic loading test was carried out on two precast prestressed concrete beam–column joints that were fabricated with two different concrete strengths in the keyway area. This testing was also performed on a cast-in-place reinforced concrete joint for comparison. The phenomena such as joint crack development, yielding, and ultimate damage were observed, and the seismic performance of the proposed precast prestressed concrete joint was determined. The results showed that the precast prestressed concrete joint and the cast-in-place joint had a similar failure mode. The stiffness, bearing capacity, ductility, and energy dissipation were comparable. The hysteresis curves were full and showed that the joints had good energy dissipation. The presence of prestressing tendons limited the development of cracks in the precast beams. The concrete strength of the keyway area had little effect on the seismic performance of the precast prestressed concrete joints. The precast prestressed concrete joints had a seismic performance that was comparable to the equivalent monolithic system.

Nonlinear Analysis of a RC Frame Structure with Semi-Interlayers Damaged during Wenchuan Earthquake

2010 ◽  
Vol 156-157 ◽  
pp. 467-472
Author(s):  
Peng Tao Yu ◽  
Jing Jiang Sun
Keyword(s):  
Nonlinear Analysis ◽  
Wenchuan Earthquake ◽  
Time History ◽  
Large Earthquake ◽  
Frame Structure ◽  
Nonlinear Time History Analysis ◽  
Frame Structures ◽  
Rc Frame ◽  
Rc Frame Structures ◽  
Nonlinear Time History

Under the excitation of large earthquake, structures enter into high nonlinear stage. Currently, Opensees, Perform-3d and Canny are used as the most popular nonlinear analysis procedures. The fiber model will be introduced firstly and the nonlinear analysis models in Canny are explained in detail. Then Canny2007 is used to conduct nonlinear time history analysis on a heavily damaged frame structure with interlayer in Dujiangyan during Wenchuan Earthquake. Analysis shows that the maximum inter-story drift appears between the interlayer and its upper layer, and the heavy damage agrees well with the results of damage investigation. By comparing the damage extent of frame structures with or without interlayer, it reveals that the seismic performance of RC frame structures without interlayer is obviously better than that of ones with interlayer.

scholarly journals Analysis of the Seismic Performance of a Two-Span Specially Shaped Column Frame

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Zhen-chao Teng ◽  
Tian-jia Zhao ◽  
Yu Liu
Keyword(s):  
Finite Element ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Peak Load ◽  
Frame Structure ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity ◽  
Specially Shaped Column

In traditional building construction, the structural columns restrict the design of the buildings and the layout of furniture, so the use of specially shaped columns came into being. The finite element model of a reinforced concrete framework using specially shaped columns was established by using the ABAQUS software. The effects of concrete strength, reinforcement ratio, and axial compression ratio on the seismic performance of the building incorporating such columns were studied. The numerical analysis was performed for a ten-frame structure with specially shaped columns under low reversed cyclic loading. The load-displacement curve, peak load, ductility coefficient, energy dissipation capacity, and stiffness degradation curve of the specially shaped column frame were obtained using the ABAQUS finite element software. The following three results were obtained from the investigation: First, when the strength of concrete in the specially shaped column frame structure was increased, the peak load increased, while the ductility and energy dissipation capacity weakened, which accelerated the stiffness degradation of the structure. Second, when the reinforcement ratio was increased in the specially shaped column frame structure, the peak load increased and the ductility and energy dissipation capacity also increased, which increased the stiffness of the structure. Third, when the axial compression ratio was increased in the structure, the peak load increased, while ductility and energy dissipation capacity reduced, which accelerated the degradation of structural stiffness.

Analysis of the Seismic Performance of RC Frame Structures with Different Types of Bracings

2012 ◽  
Vol 166-169 ◽  
pp. 2209-2215
Author(s):  
Zhi Xin Wang ◽  
Hai Tao Fan ◽  
Huang Juan Zhao
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Steel Tube ◽  
Frame Structure ◽  
Frame Structures ◽  
Finite Element Models ◽  
Base Shear ◽  
Concrete Filled Steel Tube ◽  
Different Types ◽  
Rc Frame Structures

Finite element models of frames with steel-bracings and with concrete filled steel tube struts are built in ETABS. Seismic performance of these models is analyzed with base-shear method, superposition of modal responses method and time history method respectively. The results show that the steel-bracings or concrete filled steel tube struts are efficient to increase the story-stiffness, and the top displacement of the frame structure decreases significantly.

Seismic Damage Analyses of Staircases in RC Frame Structures

2012 ◽  
Vol 446-449 ◽  
pp. 2326-2330 ◽  
Author(s):  
Huan Jun Jiang ◽  
Hai Yan Gao ◽  
Bin Wang
Keyword(s):  
Internal Force ◽  
Frame Structure ◽  
Frame Structures ◽  
Rc Frame ◽  
Structural Members ◽  
First Line ◽  
Strong Earthquakes ◽  
Rc Frame Structure ◽  
Rc Frame Structures ◽  
Recent Earthquakes

Staircases in Reinforced Concrete (RC) frame structures suffered severe damages in recent earthquakes although they are regarded as critically important passages during emergencies. Staircases act as the first line of defense in earthquakes, and therefore they first yield and fail. Then they lose the action of safe passages so that the anticipated seismic performance objectives cannot be satisfied. To make sure that staircases work as safe passages in strong earthquakes, the current Chinese code for seismic design of buildings claims special requirements on the design of staircases. At first, the influence of staircases on the structural behavior of a typical RC frame structure is studied by the comparison of internal force in the structural members considering and neglecting the effect of staircases under frequent earthquakes. Besides, the effect of staircases on the yielding and failing mechanism of the frame structure is investigated through static elasto-plastic analyses. From this study the reason of the damages suffered by cast-in-site staircases in RC frame structures under earthquakes can be understood.

Probabilistic Evaluation of Effects of Column Moment Magnification Factor on Seismic Performance of Reinforced Concrete Frames

2011 ◽  
Vol 243-249 ◽  
pp. 251-257 ◽  
Author(s):  
Ming Ji He ◽  
Chun Yang ◽  
Jian Cai ◽  
Yan Sheng Huang ◽  
Yi Wu
Keyword(s):  
Reinforced Concrete ◽  
Failure Mode ◽  
Seismic Performance ◽  
Seismic Vulnerability ◽  
Failure Modes ◽  
Fragility Curves ◽  
Frame Structures ◽  
Rc Frame ◽  
Magnification Factor ◽  
Rc Frame Structures

Enhancing column flexural capacity is the key measure in seismic capacity design to achieve strong column-weak beam failure mode and determinate the probabilistic relation between column moment magnification factor (CMMF). In the paper the effects of column moment magnification factor on seismic performance of reinforced concrete (RC) frames are evaluated to limit the occurrence probability of column-hinging failure modes within an acceptable tolerance. Monte Carlo simulation methodology is used to calculate the probability of drift demand exceeding drift capacity of two typical frame structures with consideration of major uncertainties. And fragility curves are constructed to obtain the relationship between CMMF and probability of structural damages and assess the seismic vulnerability of RC frame structures. Results show that the seismic performance of RC frame structures can be significantly enhanced by improving CMMF. The CMMF is required to be equal to or greater than 2.0 to achieve acceptable probability of exceedance of column-hinging failure mode.

In-Plane Cyclic Test on Framed Dry-Stack Masonry Panel

2010 ◽  
Vol 163-167 ◽  
pp. 3899-3903 ◽  
Author(s):  
Kun Lin ◽  
Yuri Z. Totoev ◽  
Hong Jun Liu
Keyword(s):  
Cyclic Test ◽  
Frame Structures ◽  
Rc Frame ◽  
Test Results ◽  
Seismic Behaviour ◽  
Energy Dissipation Capacity ◽  
Frictional Energy Dissipation ◽  
Rc Frame Structures ◽  
Masonry Units ◽  
New System

A new masonry system has been developed to improve the seismic behaviour of RC frame with masonry panels. In this system dry-stack masonry panels are built with masonry units capable of sliding in-plane of a panel. These masonry panels have reduced in-plane stiffness but increased frictional energy dissipation capacity compared with the traditional masonry panels. Under seismic or wind loads these panels do not detrimentally interfere with natural RC frame response but rather positively contribute to it mainly by increasing dumping. A cyclic test has been performed to evaluate the behaviour of this masonry system. Test results demonstrate that the new system can improve the seismic behaviour of RC frame structures with masonry panels.

Sign in / Sign up

Export Citation Format

Share Document