Strengthening of bridge superstructures composite beams with external post-tensioned tendons is a good technique for strengthening the existing structures. In this study, a numerical model is illustrated to study the nonlinear simulation of composite beams stiffened with externally post-tensioned tendons. The accuracy of the developed numerical model is validated using comparisons between the numerical and existing test data. The influence of various strengthening parameters is investigated, which include draped versus straight tendons, tendon length, the effect of post-tensioning on reinstating the flexural behavior of an overloaded beam, tendon eccentricity, and the degree of shear connection. A good agreement between the proposed model and the test data is obtained. The results demonstrate that at the same tendon eccentricity, the trapezoidal profile shows better behavior for the strengthened beams. However, more ductility is obtained when using the straight tendon profile. Applying post-tensioning through the beam of full length helps to reduce the creation of fatigue cracks, which always start at stress raisers, and subsequently increases the fatigue life of the composite beam. Also, the external post-tensioning effectively maintains the flexural behavior of the overloaded strengthened beam after unloading in comparison to the un-strengthened beam. It is observed that 80% degree of shear connection or higher is recommended to obtain the desired performance of the external post-tensioning force for strengthening composite beams.
