Traveling wave vibration of graphene platelet reinforced porous joined conical-cylindrical shells in a spinning motion

2022 ◽  
Vol 252 ◽  
pp. 113718
Author(s):  
Qingdong Chai ◽  
Yan Qing Wang
2016 ◽  
Vol 2016 ◽  
pp. 1-18 ◽  
Author(s):  
Dong Tang ◽  
Guoxun Wu ◽  
Xiongliang Yao ◽  
Chuanlong Wang

An analytical procedure for free vibration analysis of circular cylindrical shells with arbitrary boundary conditions is developed with the employment of the method of reverberation-ray matrix. Based on the Flügge thin shell theory, the equations of motion are solved and exact solutions of the traveling wave form along the axial direction and the standing wave form along the circumferential direction are obtained. With such a unidirectional traveling wave form solution, the method of reverberation-ray matrix is introduced to derive a unified and compact form of equation for natural frequencies of circular cylindrical shells with arbitrary boundary conditions. The exact frequency parameters obtained in this paper are validated by comparing with those given by other researchers. The effects of the elastic restraints on the frequency parameters are examined in detail and some novel and useful conclusions are achieved.


2020 ◽  
pp. 107754632098246
Author(s):  
Majid Khayat ◽  
Abdolhossein Baghlani ◽  
Seyed Mehdi Dehghan ◽  
Mohammad Amir Najafgholipour

This article investigates the influence of graphene platelet reinforcements and nonlinear elastic foundations on geometrically nonlinear dynamic response of a partially fluid-filled functionally graded porous cylindrical shell under exponential loading. Material properties are assumed to be varied continuously in the thickness in terms of porosity and graphene platelet reinforcement. In this study, three different distributions for porosity and three different dispersions for graphene platelets have been considered in the direction of the shell thickness. The Halpin–Tsai equations are used to find the effective material properties of the graphene platelet–reinforced materials. The equations of motion are derived based on the higher-order shear deformation theory and Sanders’s theory. Displacements and rotations of the shell middle surface are approximated by combining polynomial functions in the meridian direction and truncated Fourier series with an appropriate number of harmonic terms in the circumferential direction. An incremental–iterative approach is used to solve the nonlinear equations of motion of partially fluid-filled cylindrical shells based on the Newmark direct integration and Newton–Raphson methods. The governing equations of liquid motion are derived using a finite strip formulation of incompressible inviscid potential flow. The effects of various parameters on dynamic responses are investigated. A detailed numerical study is carried out to bring out the effects of some influential parameters, such as fluid depth, porosity distribution, and graphene platelet dispersion parameters on nonlinear dynamic behavior of functionally graded porous nanocomposite partially fluid-filled cylindrical shells reinforced with graphene platelets.


Author(s):  
Marco Amabili ◽  
Prabakaran Balasubramanian ◽  
Giovanni Ferrari

The nonlinear vibrations of a water-filled circular cylindrical shell subjected to radial harmonic excitation in the spectral neighborhood of the lowest resonances are investigated numerically and experimentally by using a seamless aluminum sample. The experimental boundary conditions are close to a simply supported circular cylindrical shell. Modal analysis reveals the presence of predominantly radial driven and companion modes in the low frequency range, implying the existence of a traveling wave phenomenon in the nonlinear field. Experimental studies previously carried out on cylindrical shells did not permit the complete identification of the characteristic traveling wave response and of its non-stationary nature. The added mass of the internal quiescent, incompressible and inviscid fluid results in an increase of the weakly softening behavior of the shell, as expected. The minimization of the added mass due to the excitation system and the negligible entity of the geometric imperfections of the shell allow the appearance of an exact one-to-one internal resonance between driven and companion modes. This internal resonance gives rise to a travelling wave response around the shell circumference and non-stationary, quasi-periodic vibrations, which are experimentally verified by means of stepped-sine testing with feedback control of the excitation amplitude. The same phenomenon is observed in the nonlinear response obtained numerically. The traveling wave is measured by means of state-of-the-art laser Doppler vibrometry applied to multiple points on the structure simultaneously. Previous studies present in literature did not show if this vibration can be chaotic for relatively small vibration amplitudes. Chaos is here observed in the frequency region where the travelling wave response is present for vibrations amplitudes smaller than the thickness of the shell. The relevant nonlinear reduced order model of the shell is based on the Novozhilov nonlinear shell theory retaining in-plane inertia and on an expansion of the displacements in terms of a properly chosen base of linear modes. An energy approach is used to obtain the nonlinear equations of motion, which are numerically studied (i) by using a code based on arc-length continuation and collocation method that allows bifurcation analysis in case of stationary vibrations, (ii) by a continuation code based on direct integration and Poincaré maps, which also evaluates the maximum Lyapunov exponent in case of non-stationary vibrations. The comparison of experimental and numerical results is particularly satisfactory throughout the various excitation amplitude levels considered. The two methods concur in describing the progressive development of the companion mode into a fully developed traveling wave and the subsequent appearance of quasi-periodic and eventually chaotic vibrations.


Sign in / Sign up

Export Citation Format

Share Document