Smooth interface crack between two bonded dissimilar orthotropic elastic media under shear loading

2020 ◽  
Vol 81 ◽  
pp. 103935
Author(s):  
Sha-Xu Zhou ◽  
Xian-Fang Li
1990 ◽  
Vol 57 (4) ◽  
pp. 894-900 ◽  
Author(s):  
Kuang-Chong Wu ◽  
Shyh-Jye Hwang

A correspondence is established between the problem of an interface crack in mon-oclinic composites and that of an interface crack in isotropic composites. The interface crack considered is subjected to a combined tension-compression, in-plane shear and antiplane shear loading at the crack faces. Under the applied loading, the interface crack is assumed to be partially opened. Through the correspondence, quantities of interest such as stress intensity factors, sizes of the contact zones, for monoclinic composites can be obtained from the results of the isotropic interface crack problem.


Author(s):  
Mohammad Hadi Hafezi ◽  
Tribikram Kundu

A cracked structure made of two different elastic materials having a Griffith crack at the interface is analyzed when it is subjected to pure shear loading and ultrasonic loading. The waves generated by the applied load and the crack propagation resulted from the shear loading are investigated. Peri-ultrasound modeling tool is used for this analysis. A comparison between experimental results and numerical predictions shows a very good matching between the two. Furthermore, the increase in nonlinear ultrasonic response in presence of the interface crack could also be modeled by this technique. The computed results show that when the interface crack propagates, then it breaks the interface at one end of the crack and breaks the material with lower elastic modulus at the other end. The unique feature of this peridynamics-based modeling tool is that it gives a complete picture of the structural response when it is loaded—it shows how elastic waves propagate in the structure and are scattered by the crack, how the crack surfaces open up, and then how crack starts to propagate. Different modeling tools are not needed to model these various phenomena.


2013 ◽  
Vol 18 (4) ◽  
pp. 1165-1199 ◽  
Author(s):  
B. Rogowski

Abstract The magnetoelectroelastic analysis of two bonded dissimilar piezo-electro-magneto-elastic ceramics with a crack perpendicular to and terminating at the interface is made. By using the Fourier integral transform (in perpendicular directions in each materials), the mixed boundary conditions and continuity conditions are transformed to a singular integral equation with generalized Cauchy kernel, the solution of which has been well studied, and classical methods are directly applicable here to obtain the closed form solution. The results are presented for a permeable crack under anti-plane shear loading and in-plane electric and magnetic loadings, as prescribed electric displacement and magnetic inductions or electric and magnetic fields. The results indicate that the magnetoelectroelastic field near the crack tip in the homogeneous PEMO- elastic ceramic is dominated by a traditional inverse square-root singularity, while the coupled field near the crack tip at the interface exhibits the singularity of the power law r--α , r being the distance from the interface crack tip and α depending on the material constants of a bimaterial. In particular, electric and magnetic fields have no singularity at the crack tip in a homogeneous solid, whereas they are singular around the interface crack tip. Numerical results are given graphically to show the effects of the material properties on the singularity order, field intensity factors and energy release rates. The results presented in this paper should have potential applications to the design of multilayered magnetoelectroelastic structures.


2007 ◽  
Vol 43 (10) ◽  
pp. 1090-1099 ◽  
Author(s):  
A. A. Kaminsky ◽  
M. V. Dudik ◽  
L. A. Kipnis

1988 ◽  
Vol 55 (3) ◽  
pp. 580-586 ◽  
Author(s):  
A. K. Gautesen ◽  
John Dundurs

The interface crack subjected to a combined tension-compression and shear loading is considered in the Comninou formulation, which by properly incorporating contact zones at the crack tips avoids contradictions, such as overlapping of material. It is shown that the resulting integral equation can be solved exactly. Moreover, simple asymptotic — yet very accurate — formulae are derived for the quantities of major physical interest and a comparison made with the previous results given by Comninou.


2014 ◽  
Vol 875-877 ◽  
pp. 1032-1036 ◽  
Author(s):  
Domenico Bruno ◽  
Fabrizio Greco ◽  
Lorenzo Leonetti ◽  
Paolo Nevone Blasi

A two-scale method able to carry out a macroscopic failure analysis of a composite structure in presence of microscopic mixed mode interface crack initiation, is proposed. The method is able to accurately predict local failure quantities (fiber/matrix interfacial stresses, energy release and mode mixity for an interface crack) in an arbitrary cell from the results of a macroscopic homogenized analysis. Microscopic crack initiation is thus analyzed by using a coupled stress and energy failure criterion in term of these local quantities. Numerical results are obtained for a plane strain model of a locally periodic fiber-reinforced composite material subjected to shear loading and characterized by initially undamaged fiber/matrix interfaces. Predictions for the critical load factor and interface crack length at crack onset obtained by the proposed model are compared with those obtained by means of a direct simulation.


Sign in / Sign up

Export Citation Format

Share Document