Machine-tool settings driven high-order topology optimization to grinding tooth flank by considering loaded tooth contact pattern for spiral bevel gears

2020 ◽  
Vol 172 ◽  
pp. 105397
Author(s):  
Han Ding ◽  
Jinyuan Tang
Keyword(s):  
Topology Optimization ◽  
Machine Tool ◽  
High Order ◽  
Order Topology ◽  
Contact Pattern ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Spiral Bevel ◽  
Tooth Flank

Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-Palloid System

2009 ◽  
Author(s):  
Kazumasa Kawasaki ◽  
Isamu Tsuji
Keyword(s):  
Coordinate Measuring Machine ◽  
Tooth Surface ◽  
Contact Pattern ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Form Errors ◽  
Bevel Gears ◽  
Measuring Machine ◽  
Spiral Bevel ◽  
Tooth Flank

The demand of large-sized spiral bevel gears has increased in recent years and hereafter the demand may increase more and more. The large-sized spiral bevel gears with equi-depth teeth are usually manufactured based on Klingelnberg cyclo-palloid system. In this paper, the tooth contact pattern of large-sized spiral bevel gears in this system are investigated analytically and experimentally. First, the tooth contact pattern and transmission errors of such gears are analyzed. The analysis method is based on simultaneous generations of tooth surface and simulations of meshing and contact. Next, the large-sized spiral bevel gears are manufactured and the tooth contact pattern of these gears is investigated experimentally. Moreover, the real tooth surfaces are measured using a coordinate measuring machine and the tooth flank form errors are detected using the measured coordinates. It is possible to analyze the tooth contact patterns of the spiral bevel gears with consideration of the tooth flank form errors expressing the errors as polynomial equations. Finally, the influence of alignment errors due to assembly on the tooth contact pattern is also investigated analytically and experimentally. These analyzed results were compared with experimental ones. As a result, two results showed a good agreement.

Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-palloid System

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Kazumasa Kawasaki ◽  
Isamu Tsuji
Keyword(s):  
Coordinate Measuring Machine ◽  
Tooth Surface ◽  
Contact Pattern ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Form Errors ◽  
Bevel Gears ◽  
Measuring Machine ◽  
Spiral Bevel ◽  
Tooth Flank

Demand for large-sized spiral bevel gears has increased in recent years and a trend expected to continue. The large-sized spiral bevel gears with equi-depth teeth are usually manufactured based on Klingelnberg cyclo-palloid system. In this paper, the tooth contact pattern of large-sized spiral bevel gears in this system are investigated analytically and experimentally. First, the tooth contact pattern and transmission errors of such gears are analyzed. The analysis method is based on simultaneous generations of tooth surface and simulations of meshing and contact. Next, the large-sized spiral bevel gears are manufactured and the tooth contact pattern of these gears is investigated experimentally. Moreover, the real tooth surfaces are measured using a coordinate measuring machine and the tooth flank form errors are detected using the measured coordinates. It is possible to analyze the tooth contact pattern of the spiral bevel gears with consideration of the tooth flank form errors expressing the errors as polynomial equations. Finally, the influence of alignment errors due to assembly on the tooth contact pattern is also investigated analytically and experimentally. These analyzed results were compared with experimental ones. As a result, the two results showed a good agreement.

Machine-Tool Settings to Reduce the Sensitivity of Spiral Bevel Gears to Tooth Errors and Misalignments

2008 ◽  
Vol 130 (8) ◽  
Author(s):  
Vilmos V. Simon
Keyword(s):  
Machine Tool ◽  
Contact Pressure ◽  
Angular Displacement ◽  
Angular Position ◽  
Slight Reduction ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Transmission Errors ◽  
Bevel Gears ◽  
Spiral Bevel

The method for loaded tooth contact analysis is applied for the investigation of the combined influence of machine-tool settings for pinion teeth finishing and misalignments of the mating members on load distribution and transmission errors in mismatched spiral bevel gears. By using the corresponding computer program, the influence of pinion’s offset and axial adjustment error, angular position error of the pinion axis, tooth spacing error, and machine-tool setting correction for pinion teeth finishing, on tooth contact pressure, tooth root stresses, and angular displacement of the driven gear member from the theoretically exact position based on the ratio of the numbers of teeth is investigated. On the basis of the obtained results, the optimal combination of machine-tool settings is determined. By the use of this set of machine-tool settings, the maximum tooth contact pressure and transmission errors can be significantly reduced. However, in some cases, by the use of appropriate machine-tool settings for the reduction of tooth contact pressure, the angular displacement of the driven gear increases. Therefore, different optimized combinations of machine-tool settings for pinion tooth finishing for the reduction of the sensitivity of gears to misalignments in regard to maximum tooth contact pressure and transmission errors should be applied. By the use of the combination of machine-tool settings to reduce the sensitivity of gears to misalignments in regard to transmission errors, a slight reduction of maximal tooth contact pressure is achieved, too.

Manufacture of Optimized Face-Hobbed Spiral Bevel Gears on Computer Numerical Control Hypoid Generator

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Vilmos V. Simon
Keyword(s):  
Machine Tool ◽  
Angular Displacement ◽  
Transmission Error ◽  
Numerical Control ◽  
Tooth Surface ◽  
Surface Geometry ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Spiral Bevel

In this study, a method is proposed for the advanced manufacture of face-hobbed spiral bevel gears on CNC hypoid generators with optimized tooth surface geometry. An optimization methodology is applied to systematically define optimal head-cutter geometry and machine tool settings to introduce optimal tooth modifications. The goal of the optimization is to simultaneously minimize tooth contact pressures and angular displacement error of the driven gear (the transmission error). The optimization is based on machine tool setting variation on the cradle-type generator conducted by optimal polynomial functions. An algorithm is developed for the execution of motions on the CNC hypoid generator using the relations on the cradle-type machine. Effectiveness of the method was demonstrated by using a face-hobbed spiral bevel gear example. Significant reductions in the maximum tooth contact pressure and in the transmission errors were obtained.

Optimal Machine Tool Settings for the Manufacture of Face-Hobbed Spiral Bevel Gears

2013 ◽  
Author(s):  
Vilmos V. Simon
Keyword(s):  
Machine Tool ◽  
Contact Pressure ◽  
Optimization Problem ◽  
Angular Displacement ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Transmission Errors ◽  
Bevel Gears ◽  
Spiral Bevel

In this study, an optimization methodology is proposed to systematically define optimal head-cutter geometry and machine tool settings to simultaneously minimize tooth contact pressures and angular displacement error of the driven gear and to reduce the sensitivity of face-hobbed spiral bevel gears to misalignments, while concurrently confining the loaded contact pattern within the tooth boundaries and avoiding any edge- or corner-contact conditions. The proposed optimization procedure relies heavily on a loaded tooth contact analysis for the prediction of tooth contact pressure distribution and transmission errors influenced by the misalignments inherent in the gear pair. The targeted optimization problem is a nonlinear constrained optimization problem. The core algorithm of the proposed nonlinear programming procedure is based on a direct search method. Effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. Drastic reductions in the maximum tooth contact pressure (62%) and in the transmission errors (70%) were obtained.

Reduction of Sensitivity of Spiral Bevel Gears to Misalignments by the Use of Appropriate Machine Tool Settings

2007 ◽  
Author(s):  
Vilmos V. Simon
Keyword(s):  
Machine Tool ◽  
Contact Pressure ◽  
Angular Displacement ◽  
Angular Position ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Transmission Errors ◽  
Bevel Gears ◽  
Spiral Bevel

The method for loaded tooth contact analysis is applied for the investigation of the combined influence of machine tool settings for pinion teeth finishing and misalignments of the mating members on load distribution and transmission errors in mismatched spiral bevel gears. By using the corresponding computer program the influence of pinion’s offset and axial adjustment error, angular position error of the pinion axis, tooth spacing error, and machine tool setting variation for pinion teeth finishing, on tooth contact pressure, tooth root stresses and angular displacement of the driven gear member from the theoretically exact position based on the ratio of the numbers of teeth is investigated. The obtained results show that by the use of appropriate machine tool settings the influence of misalignments and tooth errors on maximum tooth contact pressure and transmission errors can be significantly reduced.

Bevel gears tooth contact pattern verification

2018 ◽  
Vol 90 (2) ◽  
pp. 412-417
Author(s):  
Pawel Trzewik ◽  
Piotr Skawinski
Keyword(s):  
Virtual Environment ◽  
New Technologies ◽  
Contact Pattern ◽  
Tooth Contact ◽  
Spiral Bevel Gears ◽  
Content Type ◽  
Cad System ◽  
Bevel Gears ◽  
Cutting Machine ◽  
Spiral Bevel

Purpose This paper aims to create an application to support spiral bevel gear contact pattern verification in the computer aided design (CAD) system to speed up the selection of technological setups for the cutting machine by finding these in the virtual environment at the design level. Design/methodology/approach This paper presents an application which has been created to simulate a pattern check on spiral bevel gears in the virtual environment. The pattern check is conducted on the CAD models obtained from the cutting simulation in the CAD system using technological settings calculated by the KONTEPS system. Check of the contact pattern in the virtual environment works in the same way as in the real production process. The application has been written in C# programming language and run in the NX open environment in the UG NX. Findings This paper shows the possibilities of how the CAD system can be used at the design level of spiral bevel gears to verify an unloaded tooth contact pattern position for applied technological setups for dedicated cutting machine. Practical implications This paper describes an application that has the possibility to be implemented in small companies which produce small lots of gear sets and help to decrease the time for setting a cutting machine. Originality/value This paper addresses the needs to find new technologies to improve the design process of the spiral bevel gears.

Computerized Design and Tooth Contact Analysis of Spiral Bevel Gears Generated by the Duplex Helical Method

2011 ◽  
Author(s):  
Ignacio Gonzalez-Perez ◽  
Alfonso Fuentes ◽  
Kenichi Hayasaka
Keyword(s):  
Machine Tool ◽  
Contact Analysis ◽  
Spiral Bevel Gear ◽  
Contact Pattern ◽  
Tooth Contact Analysis ◽  
Spiral Bevel Gears ◽  
Transmission Errors ◽  
Bevel Gears ◽  
Gear Drive ◽  
Spiral Bevel

The duplex helical method, among the different generation methods of spiral bevel gears, has shorter times of manufacturing since both sides of the gear tooth are generated simultaneously. The duplex helical method is based on the application of a helical motion of the cradle respect to the gear blank during the infeed of the sliding base on which the work spindle is mounted. Computerized design and generation of spiral bevel gears by the duplex helical method is a complex problem since the machine-tool settings are specific for each hypoid generator and optimization of the contact pattern and the function of transmission errors is not straightforward. The proposed goals in this research paper are as follows: (i) conversion of the specific machine-tool settings of a given hypoid generator to the so-called neutral machine-tool settings that can be applied at any hypoid generator, (ii) computerized generation of the generated spiral bevel gears by the duplex helical method considering the neutral-machine tool settings, (iii) illustration of results of tooth contact analysis of a spiral bevel gear drive where the pinion has been generated by the duplex helical method for investigation of the contact pattern and the function of transmission errors, and (iv) adjustment of the contact pattern by considering parabolic profiles on the blades of the head-cutter. A numerical example is represented considering a spiral bevel gear drive generated at the Hypoid Generator 106 of Gleason.

Sign in / Sign up

Export Citation Format

Share Document