Prediction and test of stable transmission time of spiral bevel gear during a loss-of-lubrication event in helicopter transmission system

Purpose This paper aims to establish a prediction model of stable transmission time of spiral bevel gear during a loss-of-lubrication event in helicopter transmission system. Design/methodology/approach To observe the temperature change of spiral bevel gear during working condition, a test rig of spiral bevel gear was developed according to the requirements of experiments and carried out verification experiments. Findings The prediction is verified by the test of detecting the temperature of oil pool. The main damage form of helicopter spiral bevel gears under starved lubrication is tooth surface burn. The stable running time under oil-free lubrication is mainly determined by the degree of tooth surface burn control. Originality/value The experimental data of the spiral bevel gear oil-free lubrication process are basically consistent with the simulation prediction results. The results lay a foundation for the working life design of spiral bevel gear in helicopter transmission system under starved lubrication.

Cutter Head Approximation Machining Method of Line Contact Spiral Bevel Gear Pairs Based On Controlling Topological Deviations

To improve the meshing performance and increase the bearing capacity and service life of spiral gear pairs, the cutter head approximation machining method based on controlling topological deviations was proposed to solve the problem where line contact spiral bevel gears with tapered teeth depth cannot be directly machined by cutter heads. First, the mathematical model of line contact conjugate flanks was established, and meshing equations and conjugate flank equations of bevel gear pairs were derived. Second, the gear tooth flank was set as the datum tooth flank for priority machining, and the pinion theoretical tooth flank which is fully conjugate with the gear tooth flank and the pinion machining tooth flank matching with the gear were solved. Then, the geometric topological deviations model of the comparison between the pinion machining tooth flank and its theoretical tooth flank can be established. Finally, with the pinion machining tooth flank approaching its theoretical tooth flank as the modification, the additional cutting motions and machining compensation parameters of cutter heads were obtained to control the pinion machining tooth flank deviations and reduce them to the allowable deviations of its theoretical tooth flank. The contact simulation analysis and rolling test verified the correctness of the line contact conjugate flank model and feasibility of the cutter head approximation machining method.

5-axis double-flank CNC machining of spiral bevel gears via custom-shaped tools—Part II: physical validations and experiments

Recently, a new methodology for 5-axis flank computer numerically controlled (CNC) machining, called double-flank machining, has been introduced (see “5-axis double-flank CNC machining of spiral bevel gears via custom-shaped milling tools—Part I: Modeling and simulation”). Certain geometries, such as curved teeth of spiral bevel gear, admit this approach where the machining tool has tangential contact with the material block on two sides, yielding a more efficient variant of flank machining. To achieve high machining accuracy, the path-planning algorithm, however, does not look only for the path of the tool, but also for the shape of the tool itself. The proposed approach is validated by series of physical experiments using an abrasive custom-shaped tool specifically designed for a particular type of a spiral bevel gear. The potential of this new methodology is shown in the semifinishing stage of gear manufacturing, where it outperforms traditional ball end milling by an order of magnitude in terms of machining time, while keeping, or even improving, the machining error.