Polymeric membrane is a promising energy effective and an active alternative for conventional CO2 absorption column. The type of absorption liquid and operating parameters plays an efficient role in the ultimate absorption/stripping performance using gas-liquid membrane contactor. The gas flow rate has a significant effect on CO2 absorption performance, by contrast, it has no effect on stripping performance. Further the CO2 absorption performance in membrane contactor could be enhanced by high liquid flow rates. Because the gas–liquid contact time was a key factor to enhance the stripping flux at low temperature while liquid phase boundary layer thickness and associated mass transfer resistance is important at elevated temperature. So by controlling the liquid phase velocity and the length of module at low temperature better stripping performance can be achieved. The effect of liquid temperature on absorption performance in gas-liquid is not straightforward, since the liquid temperature cooperatively influence several factors.
