Experimental investigation of high replacement of cement by pumice in cement mortar: A mechanical, durability and microstructural study

2022 ◽  
pp. 104037
Author(s):  
Fayyaz Rahman ◽  
Waqas Adil ◽  
Muhammad Raheel ◽  
Mohammad Saberian Boroujeni ◽  
Jie Li ◽  
...  
2021 ◽  
Vol 306 ◽  
pp. 124887
Author(s):  
Osman Gencel ◽  
Syed Minhaj Saleem Kazmi ◽  
Muhammad Junaid Munir ◽  
Gokhan Kaplan ◽  
Oguzhan Yavuz Bayraktar ◽  
...  

Author(s):  
Hongwei Zhang ◽  
Zhenzhong Shen ◽  
Liqun Xu ◽  
Lei Gan ◽  
Zekai Ma ◽  
...  

2013 ◽  
Vol 838-841 ◽  
pp. 142-147 ◽  
Author(s):  
Jamilu Usman ◽  
Abdul Rahman Mohd Sam ◽  
Salihuddin Radin Sumadi

An experimental investigation was carried out to assess the effect of metakaolin (MK) on the compressive strength, flexural strength and porosity of cement mortar. The cement was partially substituted with MK at 0-30% replacement levels. The results show that the strengths and porosity of mortar containing up to 20% were superior to that of control (0% MK). The Balshin equation fits the experimental results of compressive strength and porosity of the specimens containing MK and there is a strong quantitative relationship between compressive strength and porosity of the specimens.


2021 ◽  
Vol 2070 (1) ◽  
pp. 012195
Author(s):  
R G Dhilip Kumar ◽  
Binu Sukumar ◽  
A Hemamathi ◽  
P Ram Shankar ◽  
Sharanya Balki

Abstract In this study, flexural behaviour of the Ferrocement panels of size 500 mm x 500 mm x 50 mm with partial replacement of ceramic powder under monotonic loading is observed. All the Ferrocement panels were casted with cement mortar of mix proportion 1:4 with w/c ratio of 0.45 and all the specimens were casted with single layer of galvanized welded wire mesh of 2mm diameter with mesh opening of 12.5 mm x 12.5 mm. The ceramic powder is administered at various percentage replacement of cement by weight and the adopted variations are 0%, 5%, 10% and 15%. Compressive strength of the mortar mix for all the different ratios of ceramic powder was carried out and the results were discussed. It can be concluded that the Panel with 10% replacement of ceramic powder offers appreciable results than the other panels.


Sign in / Sign up

Export Citation Format

Share Document