A novel separator material consisting of ZeoliticImidazolate Framework-4 (ZIF-4) and its electrochemical performance for lithium-ions battery

2017 ◽  
Vol 369 ◽  
pp. 27-34 ◽  
Author(s):  
Meng Dai ◽  
Jianxing Shen ◽  
Jiayan Zhang ◽  
Guangda Li
RSC Advances ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 6660-6666 ◽  
Author(s):  
Jun Wang ◽  
Shengli Li ◽  
Yi Zhao ◽  
Juan Shi ◽  
Lili Lv ◽  
...  

With a high specific capacity (4200 mA h g−1), silicon based materials have become the most promising anode materials in lithium-ions batteries.


2018 ◽  
Vol 6 (25) ◽  
pp. 11688-11693 ◽  
Author(s):  
Lijiang Zhao ◽  
Shitong Wang ◽  
Feng Pan ◽  
Zilong Tang ◽  
Zhongtai Zhang ◽  
...  

TiO2 microclew filled carbon cloth favours fast transport of lithium ions and electrons, causing high electrochemical performance.


2019 ◽  
Vol 9 (21) ◽  
pp. 4647
Author(s):  
Hee-Youb Song ◽  
Moon-Hyung Jung ◽  
Soon-Ki Jeong

In concentrated propylene carbonate (PC)-based electrolyte solutions, reversible lithium intercalation and de-intercalation occur at graphite negative electrodes because of the low solvation number. However, concentrated electrolyte solutions have low ionic conductivity due to their high viscosity, which leads to poor electrochemical performance in lithium-ion batteries. Therefore, we investigated the effect of the addition of 1,2-dichloroethane (DCE), a co-solvent with low electron-donating ability, on the electrochemical properties of graphite in a concentrated PC-based electrolyte solution. An effective solid electrolyte interphase (SEI) was formed, and lithium intercalation into graphite occurred in the concentrated PC-based electrolyte solutions containing various amounts of DCE, while the reversible capacity improved. Raman spectroscopy results confirmed that the solvation structure of the lithium ions, which allows for effective SEI formation, was maintained despite the decrease in the total molality of LiPF6 by the addition of DCE. These results suggest that the addition of a co-solvent with low electron-donating ability is an effective strategy for improving the electrochemical performance in concentrated electrolyte solutions.


RSC Advances ◽  
2016 ◽  
Vol 6 (56) ◽  
pp. 50846-50850 ◽  
Author(s):  
Renbing Wu ◽  
Xukun Qian ◽  
Adrian Wing-Keung Law ◽  
Kun Zhou

A green and convenient coordination polymers-inspired approach was developed to synthesize porous Co3O4 hollow nanospheres. The electrodes made of such nanospheres exhibited excellent electrochemical performance in lithium-ion batteries.


2020 ◽  
Vol 32 (12) ◽  
pp. 125403
Author(s):  
Bo Wang ◽  
Sunrui Luan ◽  
Yi Peng ◽  
Junshuang Zhou ◽  
Li Hou ◽  
...  

NANO ◽  
2019 ◽  
Vol 14 (12) ◽  
pp. 1950155
Author(s):  
Yayi Cheng ◽  
Jianfeng Huang ◽  
Liyun Cao ◽  
Yongfeng Wang ◽  
Ying Ma ◽  
...  

SnSe2 and SnSe nanocrystals were prepared using a simple solvothermal method by changing the molar ratio of SnCl[Formula: see text]2H2O and Se powder. When SnSe2 and SnSe are acted as lithium ion battery anodes, the SnSe hybrid structure shows more excellent electrochemical performance than that of SnSe2 interconnected nanosheet. It delivers a reversible capacity of 1023[Formula: see text]mAh[Formula: see text]g[Formula: see text] at a current density of 200[Formula: see text]mA[Formula: see text]g[Formula: see text], and maintaining a capacity of 498[Formula: see text]mAh[Formula: see text]g[Formula: see text] till 120 cycles. According to many present works, SnSe2 with interconnected thin nanosheet should possess more superior property than hybrid structured SnSe due to short charge transfer paths. However, in our research, the result is the opposite. Therefore, we consider that the superior electrochemical performance of SnSe is attributed to its highly reversible conversion reaction mechanism than SnSe2.


2019 ◽  
Vol 333 ◽  
pp. 50-56 ◽  
Author(s):  
Zhanjun Chen ◽  
Xianyou Wang ◽  
Xiuying Tian ◽  
Hongbing Zhong ◽  
Chuangyue Hu ◽  
...  

2013 ◽  
Vol 743-744 ◽  
pp. 8-12 ◽  
Author(s):  
Ding Ding Gao ◽  
Zhen Zhang

Graphite oxide (GO) is layered structure with functional groups such as hydroxyl, carboxyl and carbonyl between layers. Using GO as cathode active material allows lithium ions to enter the interior of cathode active material easily and the transformation of crystal form can also be obviated. GO has large amounts of surface area which enables cathode material to contact with liquid electrolyte directly, thereby direct and fast surface adsorption and reaction with lithium ions can be achieved. In this article, GO was prepared by modified Hummers method, characterized by XRD, IR, TG, and its electrochemical performance is studied as cathode active material. It is discovered that capacity can be dramatically improved and the cycle performance is excellent when GO is used as cathode material. The discharge capacity of first cycle can reach 480mAh/g at the current density 0.1A/g. The capacity is above 90% after 10 cycles.


2021 ◽  
Author(s):  
Salatan Duangdangchote ◽  
Nutthaphon Phattharasupakun ◽  
Praeploy Chomkhuntod ◽  
Poramane Chiochan ◽  
Sangchai Sarawutanukul ◽  
...  

Transport phenomena and the solvation structure of lithium ions (Li+) and hexafluorophosphate anions (PF6−) in the electrolyte with different fluoroethylene carbonate (FEC) concentrations as well as the electrochemical performance and...


Micromachines ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1410
Author(s):  
Zhong Li ◽  
Peiyue Yang ◽  
Zhongxiang Zheng ◽  
Qiyun Pan ◽  
Yisi Liu ◽  
...  

The effect of electrochemically active MnO2 as a coating material on the electrochemical properties of a Li1.2Mn0.54Ni0.13Co0.13O2 (LTMO) cathode material is explored in this article. The structural analysis indicated that the layered structure of the LTMO was unchanged after the modification with MnO2. The morphology inspection demonstrated that the rod-like LTMO particles were encapsulated by a compact coating layer. The MnO2 layer was able to hinder the electrolyte solution from corroding the LTMO particles and optimized the formation of a solid electrolyte interface (SEI). Meanwhile, lithium ions were reversibly inserted into and extracted from MnO2, which afforded an additional capacity. Compared with the bare LTMO, the MnO2-coated sample exhibited enhanced electrochemical performance. After the MnO2 coating, the first discharge capacity rose from 224.2 to 239.1 mAh/g, and the initial irreversible capacity loss declined from 78.2 to 46.0 mAh/g. Meanwhile, the cyclic retention climbed up to 88.2% after 100 cycles at 0.5 C, which was more competitive than that of the bare LTMO with a value of 71.1%. When discharging at a high current density of 2 C, the capacity increased from 100.5 to 136.9 mAh/g after the modification. These investigations may be conducive to the practical application of LTMO in prospective automotive Li-ion batteries.


Sign in / Sign up

Export Citation Format

Share Document