Inclusion Scenarios and Conformational Flexibility of the SSRI Paroxetine as Perceived from Polymorphism of β-Cyclodextrin–Paroxetine Complex

Depression, a global mental health problem, is prevalent during the coronavirus disease 2019 (COVID-19) pandemic and can be efficiently treated by selective serotonin reuptake inhibitors (SSRIs). Our study series aims at forwarding insights on the β-cyclodextrin (β-CD)–SSRI inclusion complexes by X-ray crystallography combined with density functional theory (DFT) calculation. Here, we report a new crystal form (II) of the 1:1 β-CD–paroxetine (PXT) complex, which is inspired by the reported 2:1 β-CD–PXT complex (crystal form I), reflecting an elusive phenomenon of the polymorphism in CD inclusion complexes. The β-CD–PXT polymorphism stems from the PXT conformational flexibility, which is defined by torsion angles κ, ε around the -CH2–O- group bridging the A- and C–D-rings, of which those of PXT in I and II are totally different. While PXT (II) in an open V-shaped conformation that has the B-ring shallowly inserted in the β-CD cavity, PXT (I) in a closed U-shaped structure is mostly entirely embedded in the β-CD dimeric cavity, of which the A-ring is deeply inserted in the main β-CD cavity. However, PXT molecules in both crystal forms are similarly maintained in the CD cavity via host–guest N–H···O5/O6 H-bonds and C/O–H···π(B/C) interactions and β-CDs have similar 3D arrangements, channel (II) vs. screw-channel (I). Further theoretical explorations on the β-CD–PXT thermodynamic stabilities and the PXT conformational stabilities based on their potential energy surfaces (PESs) have been completed by DFT calculations. The 2:1 β-CD–PXT complex with the greater presence of dispersion interactions is more energetically favorable than the unimolar complex. Conversely, whereas free PXT, PXT (II) and PXT in complex with serotonin transporter are more energetically stable, PXT (I) is least stable and stabilized in the β-CD cavity. As SSRIs could lessen the COVID-19 severity, the CD inclusion complexation not only helps to improve the drug bioavailability, but also promotes the use of antidepressants and COVID-19 medicines concurrently.

Mussel-inspired Coating of α-AlH3: A Compact Structure with Highly Enhanced Stability

we present a novel surfacing coating to resolve the stability of α-AlH3. Inspired by the strong chemical adhesion of mussels, the polymerization of dopamine was first introduced to coat α-AlH3 through a simple situ polymerization. The α-AlH3 was used as a substrate. In-depth characterizations confirmed compact formation with PDA on α-AlH3 surface. The coated α-AlH3 sample was characterized by XRD XPS and SEM . The results show that a strong PDA film is formed on the surface of α-AlH3, the PDA@α-AlH3 retained primary morphology. The crystal form of α-AlH3 does not change after coated by PDA. The results of XPS analysis show that N1s appears on the material after coated by PDA, indicating that polydopamine is formed on the surface of α-AlH3. The moisture absorption tests show that the moisture absorption rate of α-AlH3 is greatly reduced after being coated with PDA. The excellent intact ability of PDA prevent α-AlH3 reacting with watered in the air. The thermal stability of α-AlH3 before and after coating was analyzed by DSC. This work demonstrates the successful applications of dopamine chemistry to α-AlH3, thereby providing a potential method for the metastable materials.

Rhombic calcite microcrystals as a textural proxy for meteoric diagenesis

Numerous Phanerozoic limestones are comprised of diagenetic calcite microcrystals formed during mineralogical stabilization of metastable carbonate sediments. Previous laboratory experiments show that calcite microcrystals crystallizing under conditions similar to those that characterize meteoric diagenetic settings (impurity-free, low degree of supersaturation, high fluid:solid ratio) exhibit the rhombic form/morphology, whereas calcite microcrystals crystallizing under conditions similar to those that prevail in marine and marine burial diagenetic settings (impurity-rich, high degree of supersaturation, low fluid:solid ratio) exhibit non-rhombic forms. Based on these experimental observations, it is proposed here that rhombic calcite microcrystals form exclusively in meteoric environments. This hypothesis is tested using new and previously published textural and geochemical data from the rock record. These data show that the vast majority of Phanerozoic limestones characterized by rhombic microcrystals also exhibit petrographic and/or geochemical evidence (depleted δ13C, δ18O, and trace elements) indicative of meteoric diagenesis whereas non-rhombic forms are associated with marine burial conditions. By linking calcite microcrystal textures to specific diagenetic environments, our observations bring clarity to the conditions under which the various microcrystal textures form. Furthermore, the hypothesis that rhombic calcite microcrystals form exclusively in meteoric environments implies that this crystal form may be a useful textural proxy for meteoric diagenesis.

Cryotrapping peroxide in the active site of human mitochondrial manganese superoxide dismutase crystals for neutron diffraction

Structurally identifying the enzymatic intermediates of redox proteins has been elusive due to difficulty in resolving the H atoms involved in catalysis and the susceptibility of ligand complexes to photoreduction from X-rays. Cryotrapping ligands for neutron protein crystallography combines two powerful tools that offer the advantage of directly identifying hydrogen positions in redox-enzyme intermediates without radiolytic perturbation of metal-containing active sites. However, translating cryogenic techniques from X-ray to neutron crystallography is not straightforward due to the large crystal volumes and long data-collection times. Here, methods have been developed to visualize the evasive peroxo complex of manganese superoxide dismutase (MnSOD) so that all atoms, including H atoms, could be visualized. The subsequent cryocooling and ligand-trapping methods resulted in neutron data collection to 2.30 Å resolution. The P6122 crystal form of MnSOD is challenging because it has some of the largest unit-cell dimensions (a = b = 77.8, c = 236.8 Å) ever studied using high-resolution cryo-neutron crystallography. The resulting neutron diffraction data permitted the visualization of a dioxygen species bound to the MnSOD active-site metal that was indicative of successful cryotrapping.

Optimization of S-Nitrosocaptopril Monohydrate Storage Conditions Based on Response Surface Method

From unstable crystals to relatively stable monohydrate crystals, many researchers have been working on S-nitrosocaptopril for more than two decades. S-nitrosocaptopril monohydrate (Cap-NO·H2O) is a novel crystal form of S-nitrosocaptopril (Cap-NO), and is not only a nitric oxide (NO) donor, but also an angiotensin-converting enzyme inhibitor (ACEI). Yet, a method for long-term storage has never been reported. In order to determine the optimal storage conditions, Plackett–Burman (PB) design was performed to confirm the critical factors. Response surface methodology (RSM) was employed to determine the optimal Cap-NO·H2O storage condition, based on the rough interval determined by the path of steepest ascent experiment. The optimized storage condition was denoted as nitrogen purity of 97%, temperature of −10 °C and 1.20 g deoxidizer. In this case, a final preservation rate of 97.91 ± 0.59% could be obtained. In specific storage conditions, Cap-NO·H2O was found to be stable for at least 6 months in individual PE package, procreating a potentially applicable avenue.

Experimental Methods for the Evaluation of the Efficiency of an Innovative Sulfur-Dissolving Product in HP-HT Conditions

During production from sour gas reservoirs, precipitation of elemental sulfur can take place in production tubing, resulting in plugging of the well and stop of production. Injection in tubing of products devoted to dissolving sulfur can be an efficient solution for plug removal and production restoring. Traditionally, organic solvents (like toluene) are employed for solid sulfur dissolution. In the present work, experimental investigations have been performed on a particular innovative liquid product designed as active phase for wellbore injection or near wellbore applications. The analyses about the behavior of the considered product were conducted at HP-HT conditions. For this purpose, PVT laboratory equipment was employed, being able to reproduce the conditions of interest for the formation of elemental sulfur plug in well. An important preliminary optimization phase on the experimental setup was necessary to assure the correct management of studied liquid substance and solid sulfur. Integration of main outcomes with other kind of analyses allowed to depict a complete representation of the behavior: microscopy analysis of the liquid phase and high-resolution tomography of solid sulfur before and after the interaction were employed. A key point of the experimental characterization is the reproduction of significant involved phenomena. A preliminary effort was necessary for reproducing the realistic crystal form expected during the precipitation of solid sulfur in well. The dissolution efficiency of the liquid product is evaluated by observing its physical interaction with sulfur in a HP-HT cell. Particular attention was paid to correctly handling employed substances at the considered pressure and temperature conditions. A detailed description of the optimized equipment used in laboratory is provided. Several dissolution tests have been conducted at different temperature and pressure conditions, aiming to observe the dependence of the dissolution efficiency on the thermodynamic parameters. A visual qualitative analysis was performed on both the liquid product and the solid plug, before and after the interaction in cell. This allowed to deepen the comprehension of the dynamics of sulfur dissolution, which takes place not only from the top face of the plug, but also from preferential paths (fractures) present inside the plug itself. The presence of sulfur crystals dispersed in the liquid product after sampling from the cell is also evident at the end of the tests. The studied novel sulfur-dissolving liquid active phase is a candidate for remedial job injection at well in case of plugging due to solid elemental sulfur precipitation. The analyses here presented allowed to characterize the dissolution potential of this product. An optimized workflow was designed, including different kind of experimental disciplines.

Enhanced Removal of Pb from Electrolytic Manganese Anode Slime by Vacuum Carbothermal Reduction

Electrolytic manganese anode slime (EMAS) is produced during the production of electrolytic manganese metal. In this study, a method based on vacuum carbothermal reduction was used for Pb removal in EMAS. A Pb-removal efficiency of 99.85% and MnO purity in EMAS of 97.34 wt.% was obtained for a reduction temperature of 950°C and a carbon mass ratio of 10% for a holding time of 100 min. The dense structure of the EMAS was destroyed, a large number of multidimensional pores and cracks were formed, and the Pd-containing compound was reduced to elemental Pb by the vacuum carbothermal reduction. A recovery efficiency for chemical MnO2 of 36.6% was obtained via preparation from Pd-removed EMAS through the “roasting-pickling disproportionation” process, with an acid washing time of 100 min, acid washing temperature of 70°C, H2SO4 concentration of 0.8 mol/L, liquid-solid mass ratio of 7 mL/g, calcination temperature of 60°C and calcination time of 2.5 h. Moreover, the crystal form of the prepared chemical MnO2 was found to be basically the same as that of electrolytic MnO2, and its specific surface area, micropore volume and discharge capacity were all higher than that of electrolytic MnO2. This study provides a new method for Pd removal and recycling for EMAS.

Comparative Study of Crystallization, Mechanical Properties, and In Vitro Cytotoxicity of Nanocomposites at Low Filler Loadings of Hydroxyapatite for Bone-Tissue Engineering Based on Poly(l-lactic acid)/Cyclo Olefin Copolymer

A poly(l-lactic acid)/nanohydroxyapatite (PLLA/nHA) scaffold works as a bioactive, osteoconductive scaffold for bone-tissue engineering, but its low degradation rate limits embedded HA in PLLA to efficiently interact with body fluids. In this work, nano-hydroxyapatite (nHA) was added in lower filler loadings (1, 5, 10, and 20 wt%) in a poly(l-lactic acid)/cyclo olefin copolymer10 wt% (PLLA/COC10) blend to obtain novel poly(l-lactic acid)/cyclo olefin copolymer/nanohydroxyapatite (PLLA/COC10-nHA) scaffolds for bone-tissue regeneration and repair. Furthermore, the structure-activity relationship of PLLA/COC10-nHA (ternary system) nanocomposites in comparison with PLLA/nHA (binary system) nanocomposites was systematically studied. Nanocomposites were evaluated for structural (morphology, crystallization), thermomechanical properties, antibacterial potential, and cytocompatibility for bone-tissue engineering applications. Scanning electron microscope images revealed that PLLA/COC10-nHA had uniform morphology and dispersion of nanoparticles up to 10% of HA, and the overall nHA dispersion in matrix was better in PLLA/COC10-nHA as compared to PLLA/nHA. Fourier transformation infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC) studies confirmed miscibility and transformation of the α-crystal form of PLLA to the ά-crystal form by the addition of nHA in all nanocomposites. The degree of crystallinity (%) in the case of PLLA/COC10-nHA 10 wt% was 114% higher than pure PLLA/COC10 and 128% higher than pristine PLLA, indicating COC and nHA are acting as nucleating agents in the PLLA/COC10-nHA nanocomposites, causing an increase in the degree of crystallinity (%). Moreover, PLLA/COC10-nHA exhibited 140 to 240% (1–20 wt% HA) enhanced mechanical properties in terms of ductility as compared to PLLA/nHA. Antibacterial activity results showed that 10 wt% HA in PLLA/COC10-nHA showed substantial activity against P. aeruginosa, S. aureus, and L. monocytogenes. In vitro cytocompatibility of PLLA/COC10 and PLLA nanocomposites with nHA osteoprogenitor cells (MC3T3-E1) and bone mesenchymal stem cells (BMSC) was evaluated. Both cell lines showed two- to three-fold enhancement in cell viability and 10- to 30-fold in proliferation upon culture on PLLA/COC10-nHA as compared to PLLA/nHA composites. It was observed that the ternary system PLLA/COC10-nHA had good dispersion and interfacial interaction resulting in improved thermomechanical and enhanced osteoconductive properties as compared to PLLA/nHA.

Cocoa butter equivalent from Kpangnan butter and Pequi oil

Novel cocoa butter equivalents were designed using dry fractionated Pequi oil and solvent fractionated Kpangnan butter. Static crystallization of binary mixtures of these two fractions into the triclinic form (β2) was achieved after 12 days for all mixtures and after 4 days for the 80:20 w/w and 90:10 w/w fractionated Kpangnan:Pequi oil mixtures. Moreover, after 60 days of storage at 22oC, all binary blends (except 100% fractionated pequi oil and 100% fractionated Kpangnan butter) were crystallized in the most stable triclinic crystal form (β1). Here we also discovered an unusual melting behavior for the fractionaled 30:70 w/w and 20:80 w/w fractionated Kpangnan:Pequi oil mixtures, where after 4 days of static crystallization at room 22oC, these mixtures displayed higher than predicted melting points, 41.89 oC and 33.32 oC, respectively. This suggested a faster kinetics of transformation to the triclinic β2 form for those mixtures. Our results suggest that the 30:70 w/w fractionated Kpangnan:Pequi oil mixture with a melting point of 34oC after 60 days storage at 22oC, a stable triclinic β2 form, and a triglyceride composition of 28% POP, 4.6% POS and 33% SOS displayed solid state characteristics, melting point and crystal structure, of a commercial cocoa butter equivalent.