scholarly journals Pulsed electrodeposition of iridium catalyst nanoparticles on titanium suboxide supports for application in PEM electrolysis

Author(s):  
Leonard Böhm ◽  
Johannes Näther ◽  
Martin Underberg ◽  
Norbert Kazamer ◽  
Lisa Holtkotte ◽  
...  
2020 ◽  
Vol 1 (4) ◽  
Author(s):  
Peizeng Yang ◽  
Yaye Wang ◽  
Junhe Lu ◽  
Viktor Tishchenko ◽  
Qingguo Huang ◽  
...  

This study examined the degradation of perfluorooctanesulfonate (PFOS) in electrochemical oxidation (EO) processes in the presence of trichloroethylene (TCE). The EO experiment was performed in a gas-tight reactor using Magnéli phase titanium suboxide (Ti4O7) as the anode. The experimental data demonstrated that 75% of PFOS (2 μM) was degraded at 10 mA/cm2 current density in 30 min without TCE present in the solution, while the presence of 76 μM TCE apparently inhibited the degradation of PFOS, reducing its removal down to 53%. Defluorination ratio suggested that PFOS was significantly mineralized upon EO treatment, and it appeared to be not influenced by the presence of TCE. The respective pseudo-first order rate constants (kobs) of PFOS removal were 0.0471 and 0.0254 min-1 in the absence and presence of TCE. The degradation rates of both PFOS and TCE increased with current density rising from 2.5 to 20 mA/cm2. In the presence of TCE, chloride, chlorate, and perchlorate were formed that accounted for 79.7 %, 5.53%, and 1.51% of the total chlorine at 60 min. This work illustrates the promise of the Magnéli phase Ti4O7 electrode based electrochemical oxidation technology for degrading per- and polyfluoroalkyl substances (PFASs) and co-contaminants in groundwaters.


Author(s):  
Genki Toyooka ◽  
Toshiki Tanaka ◽  
Kenji Kitayama ◽  
Naoko Kobayashi ◽  
Takashi Watanabe ◽  
...  

A new and simple method for hydrogen production from cellulose using an iridium catalyst and an ionic liquid under mild conditions was developed.


2016 ◽  
Vol 24 (05) ◽  
pp. 1750066 ◽  
Author(s):  
HAMED RAHMANI ◽  
MAHMOOD ALIOFKHAZRAEI ◽  
ABDOSSALAM KARIMZADEH

Nanocomposite Ni–Zn coatings containing 80 wt.% Al2O3, 5 wt.% Y2O3 and 15 wt.% graphene were fabricated by pulsed electrodeposition method in nickel–zinc sulphate-based electrolyte and effects of pulse current parameters on nickel and other element contents, microstructure, resistance to corrosion and tribological properties of the coatings were investigated. The pulsed current with duty cycle from 10% to 50% was applied to different samples and frequency changed gradually from 500 to 4000[Formula: see text]Hz in five steps during coating process. Increasing the duty cycle led to decrease of absorbed nanoparticles in the surface of the coatings from 4.4 vol% to 3.58 vol% The sample coated with 10% duty cycle had utmost alumina content in the coating surface, 3.5 vol% in first layer up to 4.4 vol% in fifth layer. The sample coated with 30% duty cycle had higher corrosion resistance with passive current density of 2.5[Formula: see text]mA/cm2. Furthermore, the results showed that by increasing the duty cycle, wear rate had been increased up to 1.3[Formula: see text][Formula: see text][Formula: see text]10[Formula: see text][Formula: see text]mm2/N[Formula: see text]m.


2014 ◽  
Vol 316 ◽  
pp. 491-496 ◽  
Author(s):  
Kalavathy Santhi ◽  
T.A. Revathy ◽  
V. Narayanan ◽  
A. Stephen

2014 ◽  
Vol 1 (1) ◽  
pp. 015028 ◽  
Author(s):  
J Azevedo ◽  
C T Sousa ◽  
J Ventura ◽  
A Apolinario ◽  
A Mendes ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document