Computational and experimental study of heterofunctional azo reactive dyes synthesized for cellulosic fabric

New dyestuff moieties are introduced in the textile industry to upgrade the quality and aesthetic properties of dyed fabric. To contribute to this research endeavor, the current project was conducted for the dyeing of cellulosic fabric via new hetero-functional reactive dyes R1 and R2 synthesized in our previous study. Optimization of different process variables (temperature, salt, and alkali concentration) and their interactive study for exhaust dyeing was explored and delineated based on a statistical tool response surface methodology. Results divulged that both dyes displayed maximum exhaustion and fixation at a temperature of 61.50°C on the cellulosic fabric. Reactive dye R1 exhibited 87.62 (±3) exhaustion and 82.85 (±3) fixation percentage at their optimum salt (29.07 g/L) and alkali (32.55 g/L) dosage while R2 displayed 81.50 (±3) exhaustion and 77.21 (±3) fixation at its optimized salt (32.55 g/L) and alkali concentrations (22.84 g/L). All process variables showed a positive and synergistic effect on the dyeing properties. Enhanced exhaustion and fixation percentage of R1 as compared to R2 may be accredited to greater planarity and less steric hindrance of R1. Both dyes presented superb color buildup showing good to excellent color fastness on cotton fabric. Future perspectives of the current study comprised the application and assessment of dyeing parameters of these new reactive dyes on polyester cotton (PC) fabric.

Download Full-text

Experimental study on the restoration from a tilt-azimuth series for improvement in resolution

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010013955x ◽

1995 ◽

Vol 53 ◽

pp. 636-637

Author(s):

Norio Baba ◽

Norihiko Ichise ◽

Syunya Watanabe

Keyword(s):

Experimental Study ◽

Spherical Aberration ◽

Incident Beam ◽

Optical Parameters ◽

Beam Tilting ◽

Illumination Method ◽

Restoration Method ◽

Illumination Mode

The tilted beam illumination method is used to improve the resolution comparing with the axial illumination mode. Using this advantage, a restoration method of several tilted beam images covering the full azimuthal range was proposed by Saxton, and experimentally examined. To make this technique more reliable it seems that some practical problems still remain. In this report the restoration was attempted and the problems were considered. In our study, four problems were pointed out for the experiment of the restoration. (1) Accurate beam tilt adjustment to fit the incident beam to the coma-free axis for the symmetrical beam tilting over the full azimuthal range. (2) Accurate measurements of the optical parameters which are necessary to design the restoration filter. Even if the spherical aberration coefficient Cs is known with accuracy and the axial astigmatism is sufficiently compensated, at least the defocus value must be measured. (3) Accurate alignment of the tilt-azimuth series images.

Download Full-text