Photocatalytic degradation of textile-dyeing wastewater by using a microwave combustion-synthesized zirconium oxide supported activated carbon

2014 ◽  
Vol 27 ◽  
pp. 482-493 ◽  
Author(s):  
P. Suresh ◽  
J. Judith Vijaya ◽  
L. John Kennedy
2008 ◽  
Vol 5 (2) ◽  
pp. 219-223 ◽  
Author(s):  
Abbas J. Attia ◽  
Salih H. Kadhim ◽  
Falah H. Hussein

Photodegradation of a real textile dyeing wastewater taken from Hilla textile factory in Babylon Governorate, Iraq have been investigated. Photocatalytic degradation was carried out over suspensions of titanium dioxide or zinc oxide under ultraviolet irradiation. Photodegradation percentage was followed spectrophometrically by the measurements of absorbance at λmax equal to 380 nm. The rate of photodegradation increased linearly with time of irradiation when titanium dioxide or zinc oxide was used. A maximum color removal of 96% was achieved after irradiation time of 2.5 hours when titanium dioxide used at 303K and 82% color reduction was observed when zinc oxide used for the same period and at the same temperature. The effect of temperature on the efficiency of photodegradation of dyestuff was also studied. The activation energy of photodegradation was calculated and found to be equal to 21 ± 1 kJ mol-1 on titanium dioxide and 24 ± 1 kJ mol-1 on zinc oxide.


2021 ◽  
Vol 16 (4) ◽  
pp. 916-924
Author(s):  
Tran Thi Kim Ngan ◽  
Tran Bich Thuy ◽  
Lam Van Tan ◽  
Trung Thanh Nguyen

In recent years, there have been many research works on use of different methods to treat textile dyeing wastewater such as mechanical, biological and chemical methods (using oxidizing agents, such as: H2O2, O3, and H2O2/O3). However, some traditional textile dyeing wastewater treatment methods such as mechanical and biological methods have limitations in treating these pollutants thoroughly. To enhance the treatment efficiency, the use of photocatalysts combination with strong oxidizing agents, such as H2O2, has been extensively developed in recent years. In this study, the iron-centred bimetallic organic framework Fe-MOF has been synthesized by partial replacement of Fe3+ ions with Mn metal ions by solvent-thermal method. The analytical methods used to evaluate the structural characterization of the as-synthesized materials including Scanning Electron Microscope (SEM), Brunaurer-Emmett-Teller (BET), X-ray Diffraction (XRD), Fourier Transform Infra Red (FT-IR), and UV-Vis Diffuse Reflectance Spectroscopy (DRS). The experiments on the decomposition of organic pigment Rhodamine B were performed under varying conditions of pH, catalyst mass and RhB colorant concentration. Experiments with different electron capturers indicate that h+ plays a major role in the photochemical degradation of RhB. The stability and durability of the 0.1 Mn/Fe-MOF catalyst were evaluated through the leaching and recycle experiments, showing that the RhB degradation efficiency of the photocatalyst decreased modestly after five repetitions. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 


2017 ◽  
Vol 03 (04) ◽  
pp. 57-65
Author(s):  
G. Gnanapragasam ◽  
V. Arutchelvan ◽  
L. Soundari ◽  
C.S. Maneeshkumar

Sign in / Sign up

Export Citation Format

Share Document