On the aftershock polarity to assess residual displacement demands

This study presents a new method for strengthening the circular reinforced concrete (RC) column to foundation connections with shape memory alloy (SMA) bars and carbon fiber reinforced polymer (CFRP) sheets. In the experimental part of the study, three specimens of RC column-foundation connections were cast and tested. One specimen was used as the reference specimen without strengthening. Two other specimens were strengthened with longitudinal SMA bars and CFRP sheets. These specimens were under a constant axial compressive load and cyclic lateral displacements, simultaneously. Next, initial stiffness, energy dissipation capacity, lateral load capacity, ductility, and residual displacement of the specimens were investigated. Due to the superelastic behavior of SMA bars, the residual displacement of column-foundation connections was considerably less than that of the reference specimen. Compared to the reference specimen, the SMA-strengthened and SMA-CFRP-strengthened connections recovered 71.59% and 76.57% of the residual displacement. Therefore, SMA bars were able to recover residual displacements under cyclic loading. Also, the combination of the SMA bars with CFRP sheet was a promising solution for enhancing the amount of the energy dissipation, lateral load capacity, initial stiffness, and ductility parameters. Compared to the reference specimen, the energy dissipation, lateral load capacity, initial stiffness, and ductility ratio parameters of SMA-CFRP-strengthened connection increased about 43.45%, 76.20%, 81.69%, and 242.45%, respectively. In the numerical part of the study, a subroutine was applied for modeling the SMA materials. For the analysis, this subroutine was linked with ABAQUS software. The numerical results showed a close correlation with the experimental results.

Download Full-text

Research and Application of a Seismic Damage Classification Method of Concrete Gravity Dams Using Displacement in the Crest

Applied Sciences ◽

10.3390/app10124134 ◽

2020 ◽

Vol 10 (12) ◽

pp. 4134

Author(s):

Xiang Lu ◽

Liang Pei ◽

Jiankang Chen ◽

Zhenyu Wu ◽

Chen Chen

Keyword(s):

Failure Modes ◽

Seismic Damage ◽

Classification Method ◽

Gravity Dam ◽

Concrete Gravity Dam ◽

Gravity Dams ◽

Damage Classification ◽

Residual Displacement ◽

Concrete Gravity Dams ◽

Damage Coefficient

Concrete gravity dams are one of the most common water retention structures, some of which are located in seismically active regions. Determination of damage level after earthquakes plays an important role in assessing the safety behavior of concrete dams. Compared with the traditional performance parameters obtained from numerical simulations, such as the damage coefficient, energy dissipation, failure modes, and stress state, etc., the displacement of dams can be acquired from daily monitoring data conveniently and quickly. It is of great significance for the rapid and effective evaluation of dam properties after earthquakes. The residual displacement in the concrete gravity dam crest was adopted as the performance parameter in the paper, and the linear mapping function between the residual displacement and the damage coefficient was established based on the concrete damaged plasticity model (CDP). Based on the traditional classification method with damage coefficient, a residual displacement-based seismic damage classification method with corresponding level limits was proposed. The seismic fragility analysis of Guandi concrete gravity dam was conducted as an example to illustrate the presented methodology. The results indicate that the proposed method is reasonable, effective, and can be easily applied to different projects after slight modifications.

Download Full-text