Improvements in the efficiency of p-type bifacial Si solar cells with a rear Cu electrode using galvanic replacement reactions

2022 ◽  
Vol 234 ◽  
pp. 111411
Author(s):  
T.C. Kuo ◽  
C.R. Kuo ◽  
Wen-His Lee
2016 ◽  
Author(s):  
Piotr Panek ◽  
Barbara Swatowska ◽  
Wojciech Dawidowski ◽  
Mari Juel ◽  
Paweł Zięba

2002 ◽  
Vol 16 (01n02) ◽  
pp. 57-63 ◽  
Author(s):  
X. DENG ◽  
W. WANG ◽  
S. HAN ◽  
H. POVOLNY ◽  
W. DU ◽  
...  

This paper reports the impact of a wide bandgap p-type hydrogenated nanocrystalline silicon (nc-Si:H) on the performances of hydrogenated amorphous silicon (a-Si:H) based solar cells. The p-layer consists of nanometer-sized Si Crystallites and has a wide effective bandgap determined mainly by the quantum size-confinement effect (QSE). By incorporation of this p-layer into the devices we have obtained high performances of a-Si:H top solar cells with V oc = 1.045 V and FF = 70.3%, and much improved mid and bottom a-SiGe:H cells, deposited on stainless steel (SS) substrate. The effects of the band-edge mismatch at the p/i-interface on the I-V characteristics of the solar cells are discussed on the bases on the bases of the density-functional approach and the AMPS model.


2019 ◽  
Vol 200 ◽  
pp. 109937 ◽  
Author(s):  
Paul Procel ◽  
Philipp Löper ◽  
Felice Crupi ◽  
Christophe Ballif ◽  
Andrea Ingenito

1989 ◽  
Vol 149 ◽  
Author(s):  
Benjamin F. Fieselmann ◽  
B. Goldstein

ABSTRACTAmorphous SiC p-layers doped with trimethylboron (B(CH3) 3) were prepared with optical and electrical properties superior to those prepared with B2H6. Devices were prepared with efficiencies as high as 11.4% using trimethyl boron. The improved properties of B(CH3)3-doped a-SiC result from the fact that trimethylboron is a more effective doping agent than B2H6 and produces p-layers with a higher bandgap.


1994 ◽  
Vol 358 ◽  
Author(s):  
B. Jagannathan ◽  
J. Yi ◽  
R. Wallace ◽  
W. A. Anderson

ABSTRACTHeterojunction solar cells were fabricated by glow discharge deposition of amorphous silicon on p-type crystalline silicon resulting in a n/i/p structure. Dark I-V-T data on the devices show that the conduction in the forward bias regime (<0.4 volts) for better devices agrees with a multi-tunnelling-capture-emission process. The photoresponse was evaluated (under 100 mW/cm2) for various a-Si thicknesses and substrate resistivities. Spectral response tests showed an increased low wavelength absorption as the a-Si thickness was decreased. The blue response of the devices have better fill-factors than the red response indicating defects at the interface. Further, I-V-T and C-V measurements also corroborate the presence of defect states which seem to prevent the spread of the depletion region in crystalline silicon. The photoresponse was found to be very sensitive to the interface defects and the fill-factors ranged from 0.42, for the sample in which the depletion region had spread, to 0.1 in those where the depletion region had been reduced in thickness by the interface states.


2017 ◽  
Vol 56 (8S2) ◽  
pp. 08MB18 ◽  
Author(s):  
Woojun Yoon ◽  
James E Moore ◽  
Eunhwan Cho ◽  
David Scheiman ◽  
Nicole A Kotulak ◽  
...  

RSC Advances ◽  
2016 ◽  
Vol 6 (55) ◽  
pp. 49831-49838 ◽  
Author(s):  
Minkyu Ju ◽  
Nagarajan Balaji ◽  
Cheolmin Park ◽  
Huong Thi Thanh Nguyen ◽  
Jian Cui ◽  
...  

In this work, small random pyramid texturing (0.5–2 μm size) was generated with chemical nano-masking, to enhance the surface passivation of commercial p-type Cz-Si wafers.


Sign in / Sign up

Export Citation Format

Share Document