The paper describes a patented proposal to use jets of air in the cooling system of heavy trucks. Preliminary tests have been carried out, in the Heat Transfer Laboratory of the University of Rome “Tor Vergata”, to evaluate the heat transfer characteristics of a jet flow of air, impinging onto an externally finned cylinder. The cylinder is internally heated with an electric system. Thermocouples, located inside the cylinder, allow to measure the wall temperatures, in order to calculate the local and average convective heat transfer coefficients. A preliminary design of the practical apparatus, applied to heavy trucks, has been done in cooperation with Iveco. Nozzles are designed to be put after the fan of heavy trucks to converge air, in the form of jets, onto the tube where the charged air is flowing from the outlet of the turbo-compressor. The efficiency of the jet flow increases the cooling performances but, due to the high temperature at the outlet of the turbo-compressor, it may not be enough. The heat transfer cooling performances are enhanced if the tube to be cooled is externally finned. Some preliminary experiments have been carried out in a real scale bank test of an heavy truck engine at the Engineering Testing Laboratories Department of Iveco. Comparisons are done between the experiments and a simple theoretical model. Some conclusions are drawn about the cooling at different fluid dynamics conditions of the impinging jets.
Operational Evaluation of Climbing Lanes on Steep Grades and Heavy Trucks
