Electrification of the residential heat demand: an analysis of the power market potential to accommodate heat pumps

2021 ◽  
pp. 101173
Author(s):  
Sara Abd Alla ◽  
Vincenzo Bianco ◽  
Federico Scarpa ◽  
Luca A. Tagliafico
Keyword(s):  
Power Market ◽  
Heat Pumps ◽  
Market Potential ◽  
Heat Demand

scholarly journals Effect of Heat Demand on Integration of Urban Large-Scale Renewable Schemes—Case of Helsinki City (60 °N)

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2164
Author(s):  
Vahid Arabzadeh ◽  
Peter D. Lund
Keyword(s):  
Wind Power ◽  
Large Scale ◽  
Energy Use ◽  
Energy Systems ◽  
Energy System ◽  
Heat Pumps ◽  
Electricity Production ◽  
Population Increase ◽  
Building Energy Efficiency ◽  
Heat Demand

Heat demand dominates the final energy use in northern cities. This study examines how changes in heat demand may affect solutions for zero-emission energy systems, energy system flexibility with variable renewable electricity production, and the use of existing energy systems for deep decarbonization. Helsinki city (60 °N) in the year 2050 is used as a case for the analysis. The future district heating demand is estimated considering activity-driven factors such as population increase, raising the ambient temperature, and building energy efficiency improvements. The effect of the heat demand on energy system transition is investigated through two scenarios. The BIO-GAS scenario employs emission-free gas technologies, bio-boilers and heat pumps. The WIND scenario is based on large-scale wind power with power-to-heat conversion, heat pumps, and bio-boilers. The BIO-GAS scenario combined with a low heat demand profile (−12% from 2018 level) yields 16% lower yearly costs compared to a business-as-usual higher heat demand. In the WIND-scenario, improving the lower heat demand in 2050 could save the annual system 6–13% in terms of cost, depending on the scale of wind power.

scholarly journals Time series of heat demand and heat pump efficiency for energy system modeling

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Oliver Ruhnau ◽  
Lion Hirth ◽  
Aaron Praktiknjo
Keyword(s):  
Time Series ◽  
System Modeling ◽  
Energy System ◽  
Heat Pumps ◽  
Reanalysis Data ◽  
Coefficient Of Performance ◽  
Pump Efficiency ◽  
Water Heating ◽  
Heat Demand ◽  
Energy System Modeling

Abstract With electric heat pumps substituting for fossil-fueled alternatives, the temporal variability of their power consumption becomes increasingly important to the electricity system. To easily include this variability in energy system analyses, this paper introduces the “When2Heat” dataset comprising synthetic national time series of both the heat demand and the coefficient of performance (COP) of heat pumps. It covers 16 European countries, includes the years 2008 to 2018, and features an hourly resolution. Demand profiles for space and water heating are computed by combining gas standard load profiles with spatial temperature and wind speed reanalysis data as well as population geodata. COP time series for different heat sources – air, ground, and groundwater – and different heat sinks – floor heating, radiators, and water heating – are calculated based on COP and heating curves using reanalysis temperature data. The dataset, as well as the scripts and input parameters, are publicly available under an open source license on the Open Power System Data platform.

scholarly journals Heterogeneity of UK residential heat demand and its impact on the value case for heat pumps

Energy Policy ◽  
2020 ◽  
Vol 144 ◽  
pp. 111593
Author(s):  
Jack Flower ◽  
Graeme Hawker ◽  
Keith Bell
Keyword(s):  
Heat Pumps ◽  
Heat Demand

scholarly journals Reference applications for renewable heat

2021 ◽  
Author(s):  
F. Pag ◽  
M. Jesper ◽  
U. Jordan ◽  
W. Gruber-Glatzl ◽  
J. Fluch
Keyword(s):  
Fossil Fuel ◽  
Heat Pumps ◽  
Heat Sinks ◽  
Commercial Application ◽  
Regenerative Heat ◽  
Heating Systems ◽  
Heat Demand ◽  
Temporal Course ◽  
High Degree ◽  
Industrial Company

There is a high degree of freedom and flexibility in the way to integrate renewable process heat in industrial processes.  Nearly in every industrial or commercial application various heat sinks can be found, which are suitable to be supplied by renewable heat, e.g. from solar thermal, heat pumps, biomass or others. But in contrast to conventional fossil fuel powered heating systems, most renewable heating technologies are more sensitive to the requirements defined by the specific demand of the industrial company. Fossil fuel-based systems benefit from their indifference to process temperatures in terms of energy efficiency, their flexibility with respect to part-load as well as on-off operation, and the fuel as a (unlimited) chemical storage. In contrast, the required temperature and the temporal course of the heat demand over the year determine whether a certain regenerative heat generator is technically feasible at all or at least significantly influence parameters like efficiency or coverage rate.

scholarly journals Modelling the Integration of Residential Heat Demand and Demand Response in Power Systems with High Shares of Renewables

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6628
Author(s):  
Chiara Magni ◽  
Alessia Arteconi ◽  
Konstantinos Kavvadias ◽  
Sylvain Quoilin
Keyword(s):  
Power Systems ◽  
Power System ◽  
Demand Response ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Electric Heating ◽  
Heat Pumps ◽  
Heating Systems ◽  
Residential Heating ◽  
Heat Demand

The EU aims to become the world’s first climate-neutral continent by 2050. In order to meet this target, the integration of high shares of Renewable Energy Sources (RESs) in the energy system is of primary importance. Nevertheless, the large deployment of variable renewable sources such as wind and photovoltaic power will pose important challenges in terms of power management. For this reason, increasing the system flexibility will be crucial to ensure the security of supply in future power systems. This work investigates the flexibility potential obtainable from the diffusion of Demand Response (DR) programmes applied to residential heating for different renewables penetration and power system configuration scenarios. To that end, a bottom-up model for residential heat demand and flexible electric heating systems (heat pumps and electric water heaters) is developed and directly integrated into Dispa-SET, an existing unit commitment optimal dispatch model of the power system. The integrated model is calibrated for the case of Belgium and different simulations are performed varying the penetration and type of residential heating technologies, installed renewables capacity and capacity mix. Results show that, at country level, operational cost could be reduced up to €35 million and curtailment up to 1 TWh per year with 1 million flexible electric heating systems installed. These benefits are significantly reduced when nuclear power plants (non-flexible) are replaced by gas-fired units (flexible) and grow when more renewable capacity is added. Moreover, when the number of flexible heating systems increases, a saturation effect of the flexibility is observed.

Impact of the Utilization of Heat Pumps for Buildings Heating in the Italian Power Market

2018 ◽  
Author(s):  
Sara Abd Alla ◽  
Vincenzo Bianco ◽  
Annalisa Marchitto ◽  
Federico Scarpa ◽  
Luca A. Tagliafico
Keyword(s):  
Power Market ◽  
Heat Pumps

scholarly journals Increasing the efficiency of split type air conditioners/heat pumps by using ventilating exhaust air

2019 ◽  
Vol 100 ◽  
pp. 00006 ◽  
Author(s):  
Wojciech Cepiński ◽  
Paweł Szałański
Keyword(s):  
Energy Efficiency ◽  
Heat Exchanger ◽  
Ventilation System ◽  
Electricity Consumption ◽  
Heat Pumps ◽  
Design Solution ◽  
Simple Design ◽  
Air Conditioner ◽  
Air Conditioners ◽  
Heat Demand

The article presents the possibility of using exhaust air from ventilation system to increase the efficiency (SCOP, COP, SEER and EER) of commonly used air conditioners with the function of a heat pump. These types of devices are very popular both in residential and in public buildings. The topic discussed in the article is very important, because the widespread increase of the energy efficiency of these devices significantly influences national electricity consumption. The possibility of increasing their efficiency by directing the exhaust air from the ventilation system to the heat exchanger of the air conditioner outdoor unit has been analysed. It has been shown that the use of the simple design solution described in the article allows for a significant increase of the efficiency of these devices (seasonal efficiency even up to 35% at 100% share of exhaust air), reducing the energy consumption and increasing their capacity and operation range. By increasing the share of exhaust air it is possible to ensure year-round operation of the device and even 100% coverage of heat demand.

scholarly journals A High Resolution Spatiotemporal Urban Heat Load Model for GB

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4078
Author(s):  
Salman Siddiqui ◽  
Mark Barrett ◽  
John Macadam
Keyword(s):  
High Resolution ◽  
Heat Load ◽  
District Heating ◽  
Temporal Variations ◽  
Heat Pumps ◽  
Building Stock ◽  
Load Model ◽  
Electrical Grid ◽  
Heat Demand ◽  
Urban Heat

The decarbonisation of heating in the United Kingdom is likely to entail both the mass adoption of heat pumps and widespread development of district heating infrastructure. Estimation of the spatially disaggregated heat demand is needed for both electrical distribution network with electrified heating and for the development of district heating. The temporal variation of heat demand is important when considering the operation of district heating, thermal energy storage and electrical grid storage. The difference between the national and urban heat demands profiles will vary due to the type and occupancy of buildings leading to temporal variations which have not been widely surveyed. This paper develops a high-resolution spatiotemporal heat load model for Great Britain (GB: England, Scotland a Wales) by identifying the appropriate datasets, archetype segmentation and characterisation for the domestic and nondomestic building stock. This is applied to a thermal model and calibrated on the local scale using gas consumption statistics. The annual GB heat demand was in close agreement with other estimates and the peak demand was 219 GWth. The urban heat demand was found to have a lower peak to trough ratio than the average national demand profile. This will have important implications for the uptake of heating technologies and design of district heating.

scholarly journals Solar Thermal Regeneration of Borehole Heat Exchangers in Urban and Suburban Districts

2021 ◽  
Vol 2042 (1) ◽  
pp. 012094
Author(s):  
David Sauter ◽  
Manuel Hunziker ◽  
Joachim Poppei ◽  
Fabien Cochand ◽  
Markus Hubbuch ◽  
...  
Keyword(s):  
Flat Plate ◽  
Heat Exchangers ◽  
Urban Areas ◽  
Heat Pumps ◽  
Solar Thermal ◽  
Thermal Regeneration ◽  
Urban Neighbourhoods ◽  
Heat Demand ◽  
Roof Area ◽  
Borehole Heat Exchangers

Abstract To prevent undercooling of the ground in densely populated areas, regeneration of borehole heat exchangers (BHEs), for example by solar thermal heat, may become necessary. However, the usable roof area is often small compared to the building’s heat demand, especially in urban areas. It was investigated how much regeneration is possible in districts that are supplied entirely by heat pumps with BHEs. Example buildings were modelled based on the buildings of two districts in Zurich. Uncovered PVT collectors and glazed flat-plate collectors were used as regeneration sources. The possible regeneration was determined in a simulation process that included the effects of mutual influences between the BHEs of neighbouring buildings. As expected, glazed flat-plate collectors allow for more regeneration than uncovered PVT collectors. For full regeneration, the required usable roof area relative to the annual heat demand is about 1.8m2/MWh for PVT and 1.2m2/MWh for flat-plate collectors. Large buildings often do not provide sufficient roof area for full regeneration. A sustainable heat supply of the entire district with regenerated BHEs can be possible in suburban neighbourhoods, if the bigger buildings are distributed rather evenly. In urban neighbourhoods, areas may exist in which solar thermal regeneration alone is not sufficient.

Sign in / Sign up

Export Citation Format

Share Document