Factors affecting the performance of stormwater treatment wetlands

2001 ◽  
Vol 35 (6) ◽  
pp. 1552-1562 ◽  
Author(s):  
J.N Carleton ◽  
T.J Grizzard ◽  
A.N Godrej ◽  
H.E Post
2001 ◽  
Vol 44 (11-12) ◽  
pp. 223-230 ◽  
Author(s):  
T.A. Stentström ◽  
A. Carlander

The interest in constructed wetlands for municipal wastewater and stormwater treatment has recently increased but data for the reduction efficiency of indicator organisms are often restricted to the water phase. In a full-scale wastewater wetland in Sweden fecal coliforms and enterococci were reduced by 97-99.9% and coliphages by approximately 70%. The factors affecting the reduction are however less well understood. In two full-scale wetlands, for stormwater and wastewater treatment, an assessment has been done of the particle associated fraction of indicator organisms. No significant differences in the particle-associated numbers were seen between the inlet and the outlet of the wetlands, but the amounts of sedimenting particles varied between the two sites. In the stormwater wetland the amount of sedimenting particles at the outlet was 3% of the amount at the inlet, while the wastewater wetland had much lower particle removal efficiency. The reduction of suspended particles seems to be the main factor for bacterial elimination from the water phase, governed by vegetation and design. In the sediment, survival of presumptive E.coli, fecal enterococci, Clostridium and coliphages were long with T90-values of 27, 27, 252 and 370 days, respectively. The organisms can however be reintroduced by resuspension. Viruses in the water phase may be of main concern for a risk assessment of receiving waters.


2012 ◽  
Vol 2012 (6) ◽  
pp. 8094-8115 ◽  
Author(s):  
Margaret Bishop ◽  
James Bays ◽  
Mitchell Griffin ◽  
William Gramer

2001 ◽  
Vol 44 (11-12) ◽  
pp. 93-100 ◽  
Author(s):  
M.J. Chimney ◽  
G. Goforth

The Everglades is a vast subtropical wetland that dominates the landscape of south Florida and is widely recognized as an ecosystem of great ecological importance. As a result of anthropogenic disturbances over the past 100 years (i.e., agricultural and urban development, eutrophication resulting from stormwater runoff, changes in hydrology and invasion of exotic species), the biotic integrity of the entire Everglades is now threatened. To protect this valuable resource, the state of Florida and the Federal Government, in cooperation with other interested parties, have developed a comprehensive restoration strategy that addresses controlling excess nutrient loading and reestablishment of a more natural hydrology. These efforts include building approximately 17,000 ha of treatment wetlands, referred to as Stormwater Treatment Areas, to treat surface runoff before it is discharged into the Everglades. We briefly discuss the history of the Everglades in the context of environmental disturbance and outline the steps being taken to ensure its survival for future generations.


2019 ◽  
Vol 233 ◽  
pp. 302-307 ◽  
Author(s):  
Robin Hale ◽  
Stephen E. Swearer ◽  
Michael Sievers ◽  
Rhys Coleman

2021 ◽  
Vol 781 ◽  
pp. 146740
Author(s):  
Jonathan D. Judy ◽  
Willie Harris ◽  
Ganga M. Hettiarachchi ◽  
A. Caroline Buchanan ◽  
K. Ramesh Reddy

Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.


Author(s):  
Christine M. Dannels ◽  
Christopher Viney

Processing polymers from the liquid crystalline state offers several advantages compared to processing from conventional fluids. These include: better axial strength and stiffness in fibers, better planar orientation in films, lower viscosity during processing, low solidification shrinkage of injection moldings (thermotropic processing), and low thermal expansion coefficients. However, the compressive strength of the solid is disappointing. Previous efforts to improve this property have focussed on synthesizing stiffer molecules. The effect of microstructural scale has been overlooked, even though its relevance to the mechanical and physical properties of more traditional materials is well established. By analogy with the behavior of metals and ceramics, one would expect a fine microstructure (i..e. a high density of orientational defects) to be desirable.Also, because much microstructural detail in liquid crystalline polymers occurs on a scale close to the wavelength of light, light is scattered on passing through these materials.


Sign in / Sign up

Export Citation Format

Share Document