scholarly journals Characteristic Functions and Process Identification by Neural Networks

1997 ◽  
Vol 10 (8) ◽  
pp. 1465-1471 ◽  
Author(s):  
Joaquim A. Dente ◽  
Rui Vilela Mendes
Author(s):  
Pernilla Olausson ◽  
Daniel Ha¨ggsta˚hl ◽  
Jaime Arriagada ◽  
Erik Dahlquist ◽  
Mohsen Assadi

Traditionally, when process identification, monitoring and diagnostics are carried out for power plants and engines, physical modeling such as heat and mass balances, gas path analysis, etc. is utilized to keep track of the process. This type of modeling both requires and provides considerable knowledge of the process. However, if high accuracy of the model is required, this is achieved at the expense of computational time. By introducing statistical methods such as Artificial Neural Networks (ANNs), the accuracy of the complex model can be maintained while the calculation time is often reduced significantly reduced. The ANN method has proven to be a fast and reliable tool for process identification, but the step from the traditional physical model to a pure ANN model is perhaps too wide and, in some cases, perhaps unnecessary also. In this work, the Evaporative Gas Turbine (EvGT) plant was modeled using both physical relationships and ANNs, to end up with a hybrid model. The type of architecture used for the ANNs was the feed-forward, multi-layer neural network. The main objective of this study was to evaluate the viability, the benefits and the drawbacks of this hybrid model compared to the traditional approach. The results of the case study have clearly shown that the hybrid model is preferable. Both the traditional and the hybrid models have been verified using measured data from an existing pilot plant. The case study also shows the simplicity of integrating an ANN into conventional heat and mass balance software, already implemented in many control systems for power plants. The access to a reliable and faster hybrid model will ultimately give more reliable operation, and ultimately the lifetime profitability of the plant will be increased. It is also worth mentioning that for diagnostic purposes, where advanced modeling is important, the hybrid model with calculation time well below one second could be used to advantage in model predictive control (MPC).


Author(s):  
Yannick Chevalier ◽  
Florian Fenzl ◽  
Maxim Kolomeets ◽  
Roland Rieke ◽  
Andrey Chechulin ◽  
...  

The connectivity of autonomous vehicles induces new attack surfaces and thusthe demand for sophisticated cybersecurity management. Thus, it is important to ensure thatin-vehicle network monitoring includes the ability to accurately detect intrusive behavior andanalyze cyberattacks from vehicle data and vehicle logs in a privacy-friendly manner. For thispurpose, we describe and evaluate a method that utilizes characteristic functions and compareit with an approach based on artificial neural networks. Visual analysis of the respective eventstreams complements the evaluation. Although the characteristic functions method is an order ofmagnitude faster, the accuracy of the results obtained is at least comparable to those obtainedwith the artificial neural network. Thus, this method is an interesting option for implementation inin-vehicle embedded systems. An important aspect for the usage of the analysis methods within acybersecurity framework is the explainability of the detection results.


1996 ◽  
Vol 07 (06) ◽  
pp. 735-755 ◽  
Author(s):  
S. CAVALIERI ◽  
A. PLEBE

The paper focuses on the use of neural networks for process identification in an orange-picking robot adaptive control system. The results that will be shown in the paper refer to a study carried out under the European Community ESPRIT project “CONNY”, dealing with the application of neural networks to robotics. The aim of the research is to verify the possibility of integrating a neural identification module in a traditional system to control the movement of the manipulators of the robot. The paper illustrates integration of neural identification in the existing orange-picking robot control system, highlighting the improvement of performance obtainable. Although the proposal refers to a specific robot, it can be applied to any system with the same dynamic features.


Food Control ◽  
1994 ◽  
Vol 5 (2) ◽  
pp. 111-119 ◽  
Author(s):  
T. Eerikäinen ◽  
Y.-H. Zhu ◽  
P. Linko

1992 ◽  
Vol 16 (4) ◽  
pp. 253-270 ◽  
Author(s):  
J.F. Pollard ◽  
M.R. Broussard ◽  
D.B. Garrison ◽  
K.Y. San

Sign in / Sign up

Export Citation Format

Share Document