Static mechanical properties and ductility of biomedical ultrafine-grained commercially pure titanium produced by ECAP process

Purpose: At present, materials research in the area of SPD (severe plastic deformation) processes is very intensive. Materials processed by these techniques show better mechanical properties and have finer grain when compared to the input feedstock. The refined microstructure may be ultrafine-grained or nanostructured, where the grain size becomes less than 100 nm. One of the materials used for such processes is CP (commercially pure) titanium of various grades, which is widely used for manufacturing dental implants. The article deals with one of the technologies available for the production of ultrafine-grained titanium: Conform technology. CP titanium processed by CONFORM technology exhibits improved mechanical properties and very favourable biocompatibility, due to its fine-grained structure. The article presents the current experience in the production of ultrafine CP titanium using this technology. The main objective of this article is describing the behaviour of CP titanium during forming in the Conform device and its subsequent use in dental implantology. Design/methodology/approach: In the present study, commercially pure Grade 2 titanium was processed using the CONFORM machine. The numerical simulation of the process was done using FEM method with DEFORMTM software. The evaluation was performed by simple tensile testing and transmission electron microscopy. The first conclusions were derived from the determined mechanical properties and based on analogies in available publications on a similar topic. Findings: This study confirmed that the SPD process improves mechanical properties and does not impair the ductility of the material. The CONFORM process enables the continuous production of ultrafine-grained or nanostructured materials. Research limitations/implications: At the present work, the results show the possible way of continuous production of ultrafine-grained or nanostructured materials. Nevertheless, the further optimization is needed in order to improve the final quality of wires and stabilize the process. As these factors will be solved, the technology will be ready for the industry. Practical implications: The article gives the practical information about the continuous production of ultrafine-grained pure titanium Grade 2 and the possibility of use this material for dental implants. Originality/value: The present paper gives information about the influence of the CONFORM technology on final mechanical and structural properties with the emphasis on technological aspects

Download Full-text

THE RESEARCH OF AGING AND MECHANICAL PROPERTIES OF NANOSTRUCTURAL TITANIUM

Vektor nauki Tol yattinskogo gosudarstvennogo universiteta ◽

10.18323/2073-5073-2021-3-67-73 ◽

2021 ◽

pp. 67-73

Author(s):

L. R. Rezyapova ◽

◽

R. R. Valiev ◽

E. I. Usmanov ◽

R. Z. Valiev ◽

...

Keyword(s):

Mechanical Properties ◽

High Pressure Torsion ◽

Combined Treatment ◽

Pure Titanium ◽

Coarse Grained ◽

Second Phase ◽

Commercially Pure Titanium ◽

Commercially Pure ◽

Ultrafine Grained ◽

Pure Grade

It is known that titanium and its alloys are one of the promising materials in the industry, especially in medicine, due to their excellent biocompatibility and corrosion resistance. The latest modern equipment and instruments used in traumatology, orthopedics, dentistry, etc. demand increasingly higher mechanical properties for materials. In comparison with commercially pure titanium, alloys do not have such high corrosion-resistant properties and biocompatibility. In this regard, improving the mechanical characteristics of a pure material is an urgent issue. The authors studied the effect of annealing on the structure and properties of commercially pure grade 4 titanium in the coarse-grained and ultrafine-grained states. The ultrafine-grained state was obtained using high-pressure torsion (HPT) under the pressure of 6 GPa at N=10 revolutions at room temperature. In the microstructure investigated using transmission electron microscopy, the authors could detect particles of precipitated phases after annealing, which had different morphologies. Deformation leads to an increase in the precipitated particles after annealing. The authors carried out an X-ray phase analysis, which showed the approximation of the lattice parameters of the α-phase after deformation and annealing at 700 °C to the values of the parameters of pure titanium. Thus, aging processes occur in the material, accompanied by the decomposition of the supersaturated solid solution and the release of particles of the second phase. The paper shows the results of titanium microhardness measurements in different states. The combined treatment, consisting of HPT at N=5 revolutions, annealing at 700 °C, and additional HPT deformation at N=5 revolutions, allowed obtaining the record strength for commercially pure grade 4 titanium.

Download Full-text