Stationary waves on an inclined sheet of viscous fluid at high Reynolds and moderate Weber numbers

1996 ◽  
Vol 307 ◽  
pp. 191-229 ◽  
Author(s):  
Jeng-Jong Lee ◽  
Chiang C. Mei

A theory is described for the nonlinear waves on the surface of a thin film flowing down an inclined plane. Attention is focused on stationary waves of finite amplitude and long wavelength at high Reynolds numbers and moderate Weber numbers. Based on asymptotic equations accurate to the second order in the depth-to-wavelength ratio, a third-order dynamical system is obtained after changing to the frame of reference moving at the wave propagation speed. By examining the fixed-point stability of the dynamical system, parametric regimes of heteroclinc orbits and Hopf bifurcations are delineated. Extensive numerical experiments guided by the linear analyses reveal a variety of bifurcation scenarios as the phase speed deviates from the Hopf-bifurcation thresholds. These include homoclinic bifurcations which lead to homoclinic orbits corresponding to well separated solitary waves with one or several humps, some of which occur after passing through chaotic zones generated by period-doublings. There are also cases where chaos is the ultimate state following cascades of period-doublings, as well as cases where only limit cycles prevail. The dependence of bifurcation scenarios on the inclination angle, and Weber and Reynolds numbers is summarized.

2021 ◽  
Vol 932 ◽  
Author(s):  
Philip Hall

A strongly nonlinear theory describing the effect of small amplitude boundary forcing in the form of waves on high Reynolds number shear flows is given. The interaction leads to an $O(1)$ change in the unperturbed flow and is relevant to a number of forcing mechanisms. The cases of the shear flow being bounded or unbounded are both considered and the results for the unbounded case apply to quite arbitrary flows. The instability criterion for unbounded flows is expressed in terms of the wall forcing and the friction Reynolds number. As particular examples we investigate wall transpiration or surface undulations as sources of the forcing and both propagating and stationary waves are considered. Results are given for propagating waves with crests perpendicular to the flow direction and for stationary waves with crests no longer perpendicular to the flow direction. In the first of those situations we find the instability induced by transpiration waves is independent of the propagation speed. For wavy walls downstream propagation completely stabilises the flow at a critical speed whereas upstream propagation greatly destabilises the flow. For stationary oblique waves we find that the instability is enhanced and a much wider range of unstable wavenumbers exists. For the bounded case with a wall of fixed wavelength we identify a critical wavelength where the most dangerous mode switches from the aligned to the oblique configuration. For the transpiration problem in the oblique configuration a strong resonance occurs when the vortex wavelength coincides with the spanwise wavelength of the forcing.


1967 ◽  
Vol 18 (2) ◽  
pp. 165-184 ◽  
Author(s):  
M. Gaster

SummaryFlight tests on the Handley Page suction wing showed that turbulence at the wing root can propagate along the leading edge and cause the whole flow to be turbulent. The flow on the attachment line of a swept wing was studied in a low speed wind tunnel with particular reference to this problem of turbulent contamination.The critical Reynolds number, RθL, of the attachment-line boundary layer for the spanwise spread of turbulence was found to be about 100 for sweep angles in the range 40°–60°. A device was developed to act as a barrier to the turbulent root flow so that a clean laminar flow could exist outboard. This device was shown to be effective up to an Rθ of at least 170, so that experiments were possible on a laminar boundary layer at Reynolds numbers above the lower critical value. A spark was used to introduce spots of turbulence into the attachment-line boundary layer and the propagation speeds of the leading and trailing edges were measured. The spots expanded, the leading edge moving faster than the trailing edge, at high Reynolds numbers, and contracted at low values.The behaviour of Tollmien-Schlichting waves was also investigated by exciting the flow with sound emanating from a small hole on the attachment line. Measurements of the perturbation phase and amplitude were made downstream of the source and, although accurate values of wave length and propagation speed could be found, difficulties were experienced in evaluating the amplification ratio. Nevertheless, all small disturbances decayed at a sufficient distance from the source hole up to the highest available Reynolds number of 170.


2016 ◽  
Vol 809 ◽  
pp. 290-315 ◽  
Author(s):  
Brian F. Farrell ◽  
Petros J. Ioannou ◽  
Javier Jiménez ◽  
Navid C. Constantinou ◽  
Adrián Lozano-Durán ◽  
...  

The perspective of statistical state dynamics (SSD) has recently been applied to the study of mechanisms underlying turbulence in a variety of physical systems. An SSD is a dynamical system that evolves a representation of the statistical state of the system. An example of an SSD is the second-order cumulant closure referred to as stochastic structural stability theory (S3T), which has provided insight into the dynamics of wall turbulence, and specifically the emergence and maintenance of the roll/streak structure. S3T comprises a coupled set of equations for the streamwise mean and perturbation covariance, in which nonlinear interactions among the perturbations has been removed, restricting nonlinearity in the dynamics to that of the mean equation and the interaction between the mean and perturbation covariance. In this work, this quasi-linear restriction of the dynamics is used to study the structure and dynamics of turbulence in plane Poiseuille flow at moderately high Reynolds numbers in a closely related dynamical system, referred to as the restricted nonlinear (RNL) system. Simulations using this RNL system reveal that the essential features of wall-turbulence dynamics are retained. Consistent with previous analyses based on the S3T version of SSD, the RNL system spontaneously limits the support of its turbulence to a small set of streamwise Fourier components, giving rise to a naturally minimal representation of its turbulence dynamics. Although greatly simplified, this RNL turbulence exhibits natural-looking structures and statistics, albeit with quantitative differences from those in direct numerical simulations (DNS) of the full equations. Surprisingly, even when further truncation of the perturbation support to a single streamwise component is imposed, the RNL system continues to self-sustain turbulence with qualitatively realistic structure and dynamic properties. RNL turbulence at the Reynolds numbers studied is dominated by the roll/streak structure in the buffer layer and similar very large-scale structure (VLSM) in the outer layer. In this work, diagnostics of the structure, spectrum and energetics of RNL and DNS turbulence are used to demonstrate that the roll/streak dynamics supporting the turbulence in the buffer and logarithmic layer is essentially similar in RNL and DNS.


2012 ◽  
Vol 43 (5) ◽  
pp. 589-613
Author(s):  
Vyacheslav Antonovich Bashkin ◽  
Ivan Vladimirovich Egorov ◽  
Ivan Valeryevich Ezhov ◽  
Sergey Vladimirovich Utyuzhnikov

AIAA Journal ◽  
1999 ◽  
Vol 37 ◽  
pp. 1062-1071 ◽  
Author(s):  
A. Seifert ◽  
L. G. Pack

AIAA Journal ◽  
2000 ◽  
Vol 38 ◽  
pp. 825-834
Author(s):  
F. Novak ◽  
T. Sarpkaya

2004 ◽  
Author(s):  
William L. Keith ◽  
Kimberly M. Cipolla ◽  
David R. Hart ◽  
Deborah A. Furey

Author(s):  
Michael Maurer ◽  
Jens von Wolfersdorf ◽  
Michael Gritsch

An experimental and numerical study was conducted to determine the thermal performance of V-shaped ribs in a rectangular channel with an aspect ratio of 2:1. Local heat transfer coefficients were measured using the steady state thermochromic liquid crystal technique. Periodic pressure losses were obtained with pressure taps along the smooth channel sidewall. Reynolds numbers from 95,000 to 500,000 were investigated with V-shaped ribs located on one side or on both sides of the test channel. The rib height-to-hydraulic diameter ratios (e/Dh) were 0.0625 and 0.02, and the rib pitch-to-height ratio (P/e) was 10. In addition, all test cases were investigated numerically. The commercial software FLUENT™ was used with a two-layer k-ε turbulence model. Numerically and experimentally obtained data were compared. It was determined that the heat transfer enhancement based on the heat transfer of a smooth wall levels off for Reynolds numbers over 200,000. The introduction of a second ribbed sidewall slightly increased the heat transfer enhancement whereas the pressure penalty was approximately doubled. Diminishing the rib height at high Reynolds numbers had the disadvantage of a slightly decreased heat transfer enhancement, but benefits in a significantly reduced pressure loss. At high Reynolds numbers small-scale ribs in a one-sided ribbed channel were shown to have the best thermal performance.


Sign in / Sign up

Export Citation Format

Share Document